Hardwire

Digitrax SFX006 Series 6 Soundbug for DH165xx Decoders And Others - PNP Integral Connector or Hardwire     SoundFX®v3 Sound System Features Your locomotives will sound “in scale” like the real thing with SoundFX...

Digitrax SFX0416 DCC Sound-Only Decoder - Hardwire     Digitrax Decoders offer the following features: Wired Mobile Decoder with SoundFX+Accessory type functions for most HO scale Locomotives. Preloaded with selectable steam and diesel...

Digitrax TF4 Function-Only DCC Decoder with Integrated Transponder - Hardwire     Four 125mA (250mA peak) function output for lights or other functions Functions can be turned on/off using F0-F12 Supports both 2 digit and 4 digit...

Digitrax TL1 Function-Only DCC Decoder with Integrated Transponding - Hardwire   Your TL1 can be used as: 1. Function only DCC decoder with transponding 2. Digitrax Transponder 3. Function only DCC decoder without transponding.   Single...

ESU 51957 21-HW - 21MTC Adapter Board 3 w/ AUX 3, AUX 4, AUX 5 & AUX 6 - NEM660 21MTC Integral Connector     Dimensions:  15.5mm x 31mm x 7mm To Top Of Pins Our new adapter board 3 for decoders with 21MTC interface is best suited for...

ESU 51958 21-HW - PluX22 Adapter Board 1 - NEM658 PluX22 Integral Connector   Our new adapter board 3 for decoders with PluX22 interface is best suited for everyone intending to digitise a loco without interface but with many functions without...

ESU 51967 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector     Dimensions:  17mm x 27.2mm x 7mm To Top Of Pins   The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do...

ESU 51968 21-HW - 21MTC Adapter Board w/ AUX 3, AUX 4, AUX 5 & AUX 6     Dimensions:  20mm x 40mm x 7mm To Top Of Pins   The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if...

ESU 51970 NEM660 21MTC Integral Connector I/O Expansion Board (4x AUX, 2x Servo, Smokeunit) for LokSound, LokPilot V4.0     Dimensions:  15.5mm x 30.3mm x 8.4mm To Top Of Pins   With this expansion board you can easily expand your...

ESU 51993 Wire Harness Adapter Board - 88mm - NEM662 Next18 Integral Connector to Hardwire   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses...

ESU 51999 Adapter Board - NEM662 Next18 Integral Connector to Hardwire   The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...

ESU 53953 Adapter Board - 24-pol ESU E24 Integral Connector to Hardwire The 24-pol ESU E24 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...

SoundTraxx 810163 JST-Next18 Adapter Board - NEM662 Next18 Integral Connector to 7-Pin JST with Hardwire Harness     This adapter allows you to use our smallest decoder (The TSU-N18) in practically any n-scale model! Bring the TSU-N18's 6...

TCS 1002 FL2 Function-Only DCC Decoder - NMRA 6-pin JST to Hardwire     This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and...

TCS 1003 FL2 Function-Only DCC Decoder - NMRA 6-pin JST to Hardwire (5 pk)     This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy...

TCS 1004 FL4 Function-Only DCC Decoder - Hardwire     This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and wiring. These...

TCS 1004 FL4 Function-Only DCC Decoder - Hardwire (5 pk)     This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and wiring...

TCS 1358 21-HW - 21MTC Adapter Board (5-pk) - NEM660 21MTC to Hardwire     The 21-HW (female) is a circuit board with a 21-pin NEM660 (MTC21) socket and solder pads to connect wires. The female 21-pin socket may be used to adapt a harnessed...

TCS 1374 9-pin JST Female Socket - Hardwire Adapter Board (5-pk)     The 9-Pin JST Female Socket may be used in conjunction with a 9-pin JST Male Harness. The board has 9 solder pads for easy wiring to locomotive components or a decoder. If you...

TCS 1653 21-HW - 21MTC Adapter Board (5-pk) - NEM660 21MTC to Hardwire     The 21-HWM (21-pin HardWire Male) is a circuit board with a 21-pin NEM660 (MTC21) connector and solder pads to connect wires. The male 21-pin socket may be used with...

ZIMO LOKPL950K MS950 Adapter Board - Pin Connector to Screw Terminal     ZIMO LOKPL950K Specifications: 61 x 24.5 x 20 mm (height with decoder) Screw terminals , arranged on three sides, for locomotive wiring Locomotive board for the...

ZIMO LOKPL950P MS950 Adapter Board - Pin Connector to Solder Pad     ZIMO LOKPL950P Specifications: 61 x 24.5 x 20 mm (height with decoder) Solder Pad Interface Connection Locomotive board for the MS950 with 8 and 9-pin socket strips and...

ZIMO LOKPL955K MS955 Pin Connector to Screw Terminal Adapter Board     ZIMO LOKPL955K Specifications: 62 x 32 x 20 mm (height with decoder) Screw Terminal Interface Connection Locomotive board for the MS955 with 8 and 9-pin socket strips...

ZIMO LOKPL96BS MX696 Adapter Board - Hardwire     ZIMO LOKPL96BS Specifications: 68x26x8mm Solder Pad Interface Connection ZIMO LOKPL96 Series MX696 Adapter Board   Decoder adapter boards serve as an "intermediate part" between the...

ZIMO LOKPL96BV MX696 5V Output Adapter Board - Hardwire     ZIMO LOKPL96BV Specifications: 68x26x8mm Solder Pad Interface Connection 5V Low Voltage Output 4x Complete Servo Connection    ZIMO LOKPL96 Series MX696 Adapter...

ZIMO LOKPL990 MS990L Adapter Board - Hardwire     ZIMO LOKPL990 Specifications: 62 x 45.5 x 20 mm (height with decoder) Solder Pad Interface Connection Locomotive board for MS990L As LOKPL990P with 3 x 14-pin socket strips and 48...

ZIMO STACO2A Adapter Board - NEM662 Next18 Integral Connector to Hardwire w/ STACO Super Cap Stay-Alive Controller w/ 2x Micro 0.3F Gold Caps StayAlive controller in miniature design, suitable (also in terms of dimensions) for MX or MS decoders...

ZIMO STACO2B Adapter Board - NEM662 Next18 Integral Connector to Hardwire w/ STACO Super Cap Stay-Alive Controller w/ 2x Mini 1F Gold Caps StayAlive controller in miniature design, suitable (also in terms of dimensions) for MX or MS decoders (miniature...