Motor Decoders

Digitrax DG383AR DCC Decoder - AristoCraft Plug   Features:DG383AR fits locos with AristoCraft DCC plug arrangement. Use with locos that have single motor per truck such as AristoCraft RS-3 & RDC. Decoder Lock equipped   Series 3 Decoder...

Digitrax DG583AR DCC Decoder - AristoCraft Plug       Features: DG583AR fits locos with AristoCraft DCC plug arrangement. Use with locos that have two motors per truck such as AristoCraft SD45. Decoder Lock equipped   Series 3...

Digitrax DG7128 Series 8 Large Scale DCC Decoder - US-type Pin Header and Screw Terminals High current motor drive capacity. Suitable for G scale locomotives with total motor stall current up to 7 amps, including multiple motors. Primary 8-Pin and...

Digitrax DH588 Series 8 High Output DCC Decoder - 11-pin JST to Hardwire   Features High current motor drive capacity. Suitable for; HO/S/O and G scale locomotives with total motor stall current up to 5 amps, including multiple motors. Wired...

Digitrax DO487 Series 7 Large Scale DCC Decoder - Hardwire   Series 7 Decoder Features Smart Power Management- no more booster or programmer shutdowns! Program CVs using any Digitrax Compatible Control system without having to buy any extra...

ESU 59315 LokPilot 5 L Multi-protocol (DCC/MM/SX/M4) Decoder - Pin Header with Adapter Board     The LokPilot 5 L finds its place wherever the LokPilot 5 no longer “fits” in terms of performance. Ideally, these are vehicles of...

ESU 59325 LokPilot 5 L NMRA DCC Decoder - Pin Header with Adapter Board The LokPilot 5 L finds its place wherever the LokPilot 5 no longer “fits” in terms of performance. Ideally, these are vehicles of nominal size 0, but also gauge 1...

NCE D408SR DCC Decoder - Screw TerminalThis is a true 4 Amp (12 Amp peak) self contained decoder for S, O and large scale with connectorized wire harnesses. Functions supported: Headlight(s) plus seven additional function outputs. All function outputs...

NCE D808SR DCC Decoder O-G USA Trains Charles Ro - Screw Terminal This Silent RunningTM decoder is specifically designed for high stall current large scale locomotives such as those produced by USA Trains and Charles Ro. The decoder has 8 function...

  TCS 1303 G8 DCC Decoder - Screw Terminals     This decoder is compatible with the NEM651 standard interface found in some N-scale Bachmann and Fox Valley Models locomotives. Back EMF Load Compensation: Provides superior slow speed...