NMRA - Marklin 21MTC

Digitrax DH126MT Series 6 DCC Decoder - NMRA-NEM660 21MTC Integral Connector     Fits HO Scale Locomotives Equipped with 21MTC interface 1.5 Amp/2 Amp Peak 2 FX3 Functions, 0.5 Amp Series 6 Decoder Features. Works with PX112-2 Power...

Digitrax DH166MT Series 6 DCC Decoder - NMRA-NEM660 21MTC Integral Connector     Features: Mobile Decoder 21MTC interface with Configurable Logic Level or 12v F3-4 function outputs 1.5 Amp/2 Amps Peak 6 FX3 Functions, 0.5 Amp Series 6...

Digitrax SDH187MT Series 7 DCC Sound Decoder - NMRA-NEM660 21MTC Integral Connector   SoundFX®v3 Sound System Features Your locomotives will sound “in scale” like the real thing with SoundFX v3 Customizable with 16, 12 or 8 bit ...

Digitrax SDXH186MT Series 6 DCC Sound Decoder - NMRA-NEM660 21MTC Integral Connector   SoundFX®v3 Sound System Features Your locomotives will sound “in scale” like the real thing with SoundFX v3 Customizable with 16, 12 or 8...

Digitrax SDXH187MT Series 7 DCC Sound Decoder - NMRA-NEM660 21MTC Integral Connector   SoundFX®v3 Sound System Features Your locomotives will sound “in scale” like the real thing with SoundFX v3 Customizable with 16, 12 or 8...

ESU 51967 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector     Dimensions:  17mm x 27.2mm x 7mm To Top Of Pins   The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do...

ESU 58449 LokSound 5 MKL Standard Multi-protocol (DCC/MM/SX/M4) Sound Decoder - NMRA 21MTC Integral Connector   ESU decoder ship to us blank (or mute, or no pre-loaded sound file, or...) unlike other decoder options that we offer.  The ESU...

ESU 59649 LokPilot 5 MKL Standard Multi-protocol (DCC/MM/SX/M4) Decoder - NMRA 21MTC Integral Connector     The LokPilot 5 is the most important representative of the LokPilot family and is suitable for almost all questions in locomotives of...

ESU 59659 LokPilot 5 MKL Standard NMRA DCC Decoder - NMRA 21MTC Integral Connector     The LokPilot 5 DCC is the "twin brother" of the LokPilot 5. The two share almost all characteristics, however, the LokPilot 5 DCC is a pure DCC decoder and...

NCE D16MTC DCC Decoder - NMRA-NEM660 21MTC Integral Connector6 function decoder with direct plug into locos equipped with NMRA 21 pin MTC (NEM660) plug.   Dimensions: 0.900 x 0.615 x .180 inches 23 x 16 x 4.7 mm   Features of this...

NixTrainz Decoder Buddy Mini 1k Ohm Resistor 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector   Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple added features...

SBS4DCC 21MTC Adapter Board Spacer - NEM660 Female-Male 4.3mm Connector     Dimensions:  14.4mm x 3mm x 4.4mm Block - 2.4mm Pins on 1.27mm Centers     The 21MTC adapter board spacer is technically intended to be through-hole...

TCS 1250 NEM660 - 21MTC 21-Pin Decoder Ejector Tool     Don't use your fingers! Use the Ejector!   No more using screwdrivers or stressing over trying to remove WOW121 decoders from WOWMotherboards. With the Decoder Ejector a hard and...

TCS 1352 Wire Harness - T-1-21 - 2.5cm NEM660 21MTC to 9-pin JST     The T-1"-21 is an adapter harness with 1" (2.54 cm) wires used for connecting a 9-Pin JST to a 21-Pin motherboard. 9-Pin JST decoders such as the WOW101, T1,...

TCS 1353 Wire Harness - T-3.5-21 - 8.9cm NEM660 21MTC to 9-pin JST     The T-3.5"-21 is an adapter harness with 3.5" (8.89 cm) wires used for connecting a 9-Pin JST to a 21-Pin motherboard. 9-Pin JST decoders such as the WOW101, T1,...

TCS 1354 Wire Harness - T-5-21 - 12.7cm NEM660 21MTC to 9-pin JST     The T-5"-21 is an adapter harness with 5" (12.7 cm) wires used for connecting a 9-Pin JST to a 21-Pin motherboard. 9-Pin JST decoders such as the WOW101, T1,...

TCS 1355 Wire Harness - MC-1-21 - 2.5cm NEM660 21MTC to 7-pin Micro JST     The MC-1"-21 is an adapter harness with 1" (2.54 cm) wires used for connecting a 7-Pin JST to a 21-Pin motherboard. 7-Pin JST decoders such as the MC2 and MC4 may be...

TCS 1356 Wire Harness - MC-3.5-21 - 8.9cm NEM660 21MTC to 7-pin Micro JST     The MC-3.5"-21 is an adapter harness with 3.5" (8.89 cm) wires used for connecting a 7-Pin JST to a 21-Pin motherboard. 7-Pin JST decoders such as the MC2 and MC4 may...

TCS 1357 Wire Harness - MC-5-21 - 12.7cm NEM660 21MTC to 7-pin Micro JST     The MC-5"-21 is an adapter harness with 5" (12.7cm) wires used for connecting a 7-Pin JST to a 21-Pin motherboard. 7-Pin JST decoders such as the MC2 and MC4 may be...

ZIMO Elektronik... World Class Motor Control... Exceptional Value... ZIMO motion decoders also offer all of the world class functions of our sound decoders: silent drive selectable between 20 or 40 kHz, adjustable BEMF, special settings for coreless...

ZIMO Elektronik... World Class Motor Control... Exceptional Value...ZIMO MS440 DCC Decoders offer the following features: The MS440 is the "standard 21MTC model" for H0 scale sound in the ZIMO decoder range.  It comes in two variations of a single...