Bulk Order

ESU 59824 LokPilot 5 Micro NMRA DCC Decoder - NEM658 PluX16 Integral Connector     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so...

ESU 59826 LokPilot 5 Micro NMRA DCC Decoder - NEM651 6-pin Wired Plug     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so small that...

ESU 59827 LokPilot 5 Micro NMRA DCC Decoder - NEM651 6-pin Integral Connector     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so...

ESU 59828 LokPilot 5 Micro NMRA DCC Decoder - NEM662 Next18 Integral Connector     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm), just so...

ESU 59837 LokPilot 5 Micro Multi-protocol (DCC/MM/SX/M4) Decoder - NEM651 6-pin Integral Connector (90 Degree)     The LokPilot 5 micro is the smallest digital decoder from ESU to date. Thanks to the use of subminiature components, 8-layer...

ESU 59857 LokPilot 5 Micro NMRA DCC Decoder - NEM651 6-pin Integral Connector (90 Degree)     The LokPilot 5 micro DCC is the "twin" of the LokPilot 5 micro. With just 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor: 2.9mm),...

ESU 59925 LokPilot 5 Nano NMRA DCC Decoder - ESU E24 Integral Connector The LokPilot 5 Nano DCC is the “twin” of the LokSound 5 Nano DCC. At 19.6 mm x 8.5 mm and a thickness of only 3.2 mm, it is exactly the same size as the corresponding...

NCE D13NHP DCC Decoder w/ Small No-Halt Module - NEM652 8-pin Wired Plug   Direct plug in to locos equipped with NMRA 8 pin plug Caution: Not for use with more than 15 Volts track voltage   NCE Decoders offer the following features: Torque...

NCE D13W DCC Decoder - Hardwire D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth low...

NCE D13W DCC Decoder - Hardwire D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth low...

NCE D13W DCC Decoder - Hardwire   D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth...

NCE D408SR DCC Decoder - Screw TerminalThis is a true 4 Amp (12 Amp peak) self contained decoder for S, O and large scale with connectorized wire harnesses. Functions supported: Headlight(s) plus seven additional function outputs. All function outputs...

NCE D808SR DCC Decoder O-G USA Trains Charles Ro - Screw Terminal This Silent RunningTM decoder is specifically designed for high stall current large scale locomotives such as those produced by USA Trains and Charles Ro. The decoder has 8 function...

NCE DA-SR DCC Decoder - HO Drop-in AT-Style BoardEasy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto 1000. This decoder has five function outputs.   Fits Models: Atlas GP38, GP40, RS1/2/3, C424/5,...

NCE DA-SR DCC Decoder - HO Drop-in AT-Style BoardEasy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto 1000. This decoder has five function outputs.   Fits Models: Atlas GP38, GP40, RS1/2/3, C424/5,...

NCE DCC "Q-Snap" Quad Twin Coil Stationary Switch Decoder FOR TWIN COIL SWITCH MACHINES ONLY   All new easy programming! Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc) Supports the full range of DCC accessory addresses...