Bulk Order

ESU 51957 21-HW - 21MTC Adapter Board 3 w/ AUX 3, AUX 4, AUX 5 & AUX 6 - NEM660 21MTC Integral Connector     Dimensions:  15.5mm x 31mm x 7mm To Top Of Pins Our new adapter board 3 for decoders with 21MTC interface is best suited for...

ESU 51966 Change Over Ski for LokSound or LokPilot w/ 21MTC     Dimensions:  24mm x 43mm x 12.7mm To Top Of Pins   Many railcars are equipped with a grinder at both ends. For proper function in block locations and for timely stopping...

ESU 51967 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector     Dimensions:  17mm x 27.2mm x 7mm To Top Of Pins   The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do...

ESU 51968 21-HW - 21MTC Adapter Board w/ AUX 3, AUX 4, AUX 5 & AUX 6     Dimensions:  20mm x 40mm x 7mm To Top Of Pins   The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if...

ESU 51970 NEM660 21MTC Integral Connector I/O Expansion Board (4x AUX, 2x Servo, Smokeunit) for LokSound, LokPilot V4.0     Dimensions:  15.5mm x 30.3mm x 8.4mm To Top Of Pins   With this expansion board you can easily expand your...

ESU 51993 Wire Harness Adapter Board - 88mm - NEM662 Next18 Integral Connector to Hardwire   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses...

ESU 51994 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 6-pin NEM651   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51995 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 8-pin NEM652   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51996 Adapter Board - NEM662 Next18 Integral Connector to NEM658 PluX16 Integral Connector   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our...

ESU 51997 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NEM658 PluX12 Integral Connector   This adapter board can be docked to all decoders with Next18 connection and offers a PluX12 interface on the locomotive...

ESU 51998 Adapter Board - NEM662 Next18 Integral Connector to NEM660 21MTC Integral Connector     This small adapter board is a practical helper for equipping some models (e.g. from Liliput) with a LokSound decoder: A 21MTC interface was...

ESU 51999 Adapter Board - NEM662 Next18 Integral Connector to Hardwire   The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...

ESU 53956 Adapter Board - NEM662 Next18 Integral Connector to RCN114 14MTC Integral Connector Using this adapter board with the dimensions 13.5mm x 8.4mm, Minitrix® locomotives with MTC14 interface can finally be equipped with a LokSound decoder at...

ESU 58810 LokSound 5 Micro Multi-protocol (DCC/MM/SX/M4) Sound Decoder - NEM652 8-pin Wired Plug   ESU decoder ship to us blank (or mute, or no pre-loaded sound file, or...) unlike other decoder options that we offer.  The ESU Sound File...

ESU 58813 LokSound 5 Micro Multi-protocol (DCC/MM/SX/M4) Sound Decoder - Hardwire   ESU decoder ship to us blank (or mute, or no pre-loaded sound file, or...) unlike other decoder options that we offer.  The ESU Sound File Library offers...

ESU 58814 LokSound 5 Micro Multi-protocol (DCC/MM/SX/M4) Sound Decoder - NEM658 PluX16 Integral Connector   ESU decoder ship to us blank (or mute, or no pre-loaded sound file, or...) unlike other decoder options that we offer.  The ESU Sound...