Bulk Order

Digitrax DHDP DCC Decoder 9-Pin JST Dummy Plug (5-pk)     Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)   This product is also suitable for use with mnany ESU LokSound, TCS, Soundtraxx,...

Digitrax DNDP DCC Decoder 8-Pin Micro JST Dummy Plug (5-pk)   Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack) Lets you run locos as DC or DCC For DC only operation use the dummy plug with either DNWH or...

ESU 51956 LokSound 5 L Pin Header Adapter Board     Dimensions:  TBD - mm x mm x mm To Top Of Pins   On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems...

ESU 51966 Change Over Ski for LokSound or LokPilot w/ 21MTC     Dimensions:  24mm x 43mm x 12.7mm To Top Of Pins   Many railcars are equipped with a grinder at both ends. For proper function in block locations and for timely stopping...

ESU 51992 Adapter Board - 24-pol ESU E24 Integral Connector to NEM658 PluX16 Integral Connector This adapter board can be connected to all decoders with an E24 connection and offers a PluX16 interface on the locomotive side. This means, for example, a...

ESU 51993 Wire Harness Adapter Board - 88mm - NEM662 Next18 Integral Connector to Hardwire   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses...

ESU 51994 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 6-pin NEM651   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51995 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 8-pin NEM652   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51996 Adapter Board - NEM662 Next18 Integral Connector to NEM658 PluX16 Integral Connector   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our...

ESU 51997 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NEM658 PluX12 Integral Connector   This adapter board can be docked to all decoders with Next18 connection and offers a PluX12 interface on the locomotive...

ESU 51998 Adapter Board - NEM662 Next18 Integral Connector to NEM660 21MTC Integral Connector     This small adapter board is a practical helper for equipping some models (e.g. from Liliput) with a LokSound decoder: A 21MTC interface was...

ESU 51999 Adapter Board - NEM662 Next18 Integral Connector to Hardwire   The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...

ESU 53951 NEM660 21MTC Integral Connector to Hübner Schienenbus Adapter Board for LokSound or LokPilot Decoders     This adapter board is for owners of a Hübner railbus in track 1 (Art. No. 4070 or 4071) thought. There, a LokSound 2...

ESU 53953 Adapter Board - 24-pol ESU E24 Integral Connector to Hardwire The 24-pol ESU E24 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...

ESU 53956 Adapter Board - NEM662 Next18 Integral Connector to RCN114 14MTC Integral Connector Using this adapter board with the dimensions 13.5mm x 8.4mm, Minitrix® locomotives with MTC14 interface can finally be equipped with a LokSound decoder at...

NixTrainz Decoder Buddy Adapter Board - Test Module     Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple added features. This mother board does not include the 21-Pin Decoder...