Bulk Order

Digitrax DN136D Series 6 DCC Decoder - NMRA 8-pin Micro JST to Hardwire   Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale 1.0 Amp/1.5 Amps Peak 3...

Digitrax DN136PS Series 6 DCC Decoder - NMRA 8-pin Micro JST to NEM652 8-pin Wired Plug Short Harness   Fits Many N/HO Locomotives with 8 pin Medium Socket Size: .55” x .404” x .2” 13.9mm x 10.3mm x 5 mm N/HO Scale Digitrax...

Digitrax DN146IP Series 6 DCC Decoder - NEM652 8-pin Integral Connector   Fits Many DCC-Ready N and HO Scale Locomotives Size: 1.158” x .386” x .115”29.43mm x 9.81mm x 2.98mm N Scale 1.0 Amp/1.5 Amps Peak   Series 6...

Digitrax DNDP DCC Decoder 8-Pin Micro JST Dummy Plug (5-pk)   Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack) Lets you run locos as DC or DCC For DC only operation use the dummy plug with either DNWH or...

Digitrax TF4 Function-Only DCC Decoder with Integrated Transponder - Hardwire     Four 125mA (250mA peak) function output for lights or other functions Functions can be turned on/off using F0-F12 Supports both 2 digit and 4 digit...

Digitrax TL1 Function-Only DCC Decoder with Integrated Transponding - Hardwire   Your TL1 can be used as: 1. Function only DCC decoder with transponding 2. Digitrax Transponder 3. Function only DCC decoder without transponding.   Single...

ESU 51993 Wire Harness Adapter Board - 88mm - NEM662 Next18 Integral Connector to Hardwire   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses...

ESU 51994 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 6-pin NEM651   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51995 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 8-pin NEM652   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51996 Adapter Board - NEM662 Next18 Integral Connector to NEM658 PluX16 Integral Connector   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our...

ESU 51997 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NEM658 PluX12 Integral Connector   This adapter board can be docked to all decoders with Next18 connection and offers a PluX12 interface on the locomotive...

ESU 51998 Adapter Board - NEM662 Next18 Integral Connector to NEM660 21MTC Integral Connector     This small adapter board is a practical helper for equipping some models (e.g. from Liliput) with a LokSound decoder: A 21MTC interface was...

ESU 51999 Adapter Board - NEM662 Next18 Integral Connector to Hardwire   The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...

ESU 53956 Adapter Board - NEM662 Next18 Integral Connector to RCN114 14MTC Integral Connector Using this adapter board with the dimensions 13.5mm x 8.4mm, Minitrix® locomotives with MTC14 interface can finally be equipped with a LokSound decoder at...

NCE N12-NEM DCC Decoder - NEM651 6-pin Integral Connector     Plug in 4 function decoder with 6 pin NEM 651 connector.   NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Silent...

NCE N12SR DCC Decoder - Hardwire     NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Programmable Start, Mid and Maximum speed works for all speed modes Motor rating 1 Amp continuous, 1.25...