Bulk Order

Digitrax DZ146 Series 6 DCC Decoder - Hardwire   Wired Motor & Function Decoder that fits many N and HO Scale Locos. Size: .55” x .4” x .148”14mm x 10.23mm x 3.77mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 4 FX3 Functions, 0...

Digitrax DZ146IN Series 6 DCC DecoderDigitrax - NEM651 6-pin Integral Connector   Series 6 Features 4 FX3 Functions .386” x .559” x .137”9.8mm x 14.2mm x 3.48mm Fits Many N and HO Locomotives Series 6 Decoder Features 2 Digit...

Digitrax DZ146PS Series 6 DCC Decoder - NEM652 8-pin Wired Plug Short Harness   Fits Many DCC-Ready Z, N and HO Scale Locomotives Size: .55” x .4” x .148”14mm x 10.23mm x 3.77mm Z/N/HO Scale 1.0 Amp/1.5 Amps Peak 4...

Digitrax TF4 Function-Only DCC Decoder with Integrated Transponder - Hardwire     Four 125mA (250mA peak) function output for lights or other functions Functions can be turned on/off using F0-F12 Supports both 2 digit and 4 digit...

Digitrax TL1 Function-Only DCC Decoder with Integrated Transponding - Hardwire   Your TL1 can be used as: 1. Function only DCC decoder with transponding 2. Digitrax Transponder 3. Function only DCC decoder without transponding.   Single...

ESU 51954 21MTC to 9-pin JST Adapter Board (for Athearn locomotives)     Dimensions:  TBD - mm x mm x mm To Top Of Pins   Perfect for Athearn (and others) this new 9 pin (female) 21MTC (Male) adapter board allows the popular 6...

ESU 51956 LokSound 5 L Pin Header Adapter Board     Dimensions:  TBD - mm x mm x mm To Top Of Pins   On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems...

ESU 51966 Change Over Ski for LokSound or LokPilot w/ 21MTC     Dimensions:  24mm x 43mm x 12.7mm To Top Of Pins   Many railcars are equipped with a grinder at both ends. For proper function in block locations and for timely stopping...

ESU 51992 Adapter Board - 24-pol ESU E24 Integral Connector to NEM658 PluX16 Integral Connector This adapter board can be connected to all decoders with an E24 connection and offers a PluX16 interface on the locomotive side. This means, for example, a...

ESU 51993 Wire Harness Adapter Board - 88mm - NEM662 Next18 Integral Connector to Hardwire   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses...

ESU 51994 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 6-pin NEM651   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51995 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 8-pin NEM652   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51996 Adapter Board - NEM662 Next18 Integral Connector to NEM658 PluX16 Integral Connector   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our...

ESU 51997 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NEM658 PluX12 Integral Connector   This adapter board can be docked to all decoders with Next18 connection and offers a PluX12 interface on the locomotive...

ESU 51998 Adapter Board - NEM662 Next18 Integral Connector to NEM660 21MTC Integral Connector     This small adapter board is a practical helper for equipping some models (e.g. from Liliput) with a LokSound decoder: A 21MTC interface was...

ESU 51999 Adapter Board - NEM662 Next18 Integral Connector to Hardwire   The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...