Bulk Order

Digitrax DG583AR DCC Decoder - AristoCraft Plug       Features: DG583AR fits locos with AristoCraft DCC plug arrangement. Use with locos that have two motors per truck such as AristoCraft SD45. Decoder Lock equipped   Series 3...

Digitrax DG583S DCC Decoder - Screw Terminals     Series 3 Decoder Features Series 3 decoders with 6 functions have FX3 function outputs Torque compensation SuperSonic motor drive for quiet operation (silent operation) Support for all DCC...

Digitrax DH588 Series 8 High Output DCC Decoder - 11-pin JST to Hardwire   Features High current motor drive capacity. Suitable for; HO/S/O and G scale locomotives with total motor stall current up to 5 amps, including multiple motors. Wired...

Digitrax DHDP DCC Decoder 9-Pin JST Dummy Plug (5-pk)     Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)   This product is also suitable for use with mnany ESU LokSound, TCS, Soundtraxx,...

Digitrax DNDP DCC Decoder 8-Pin Micro JST Dummy Plug (5-pk)   Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack) Lets you run locos as DC or DCC For DC only operation use the dummy plug with either DNWH or...

Digitrax SDYH588ST Series 8 DCC Dual "Stereo" Speaker Large Scale Sound Decoder - 11-pin JST to Hardwire   Digitrax decoders ship to us with a preloaded sound scheme but are reprogrammable like other decoder options that we offer.  The...

Digitrax SFX007 Series 7 DCC Sound-Only Decoder - Hardwire   Digitrax decoders ship to us with a preloaded sound scheme but are reprogrammable like other decoder options that we offer.  The Digitrax Sound Depot offers several additional sound...

Digitrax SFX0416 DCC Sound-Only Decoder - Hardwire     Digitrax Decoders offer the following features: Wired Mobile Decoder with SoundFX+Accessory type functions for most HO scale Locomotives. Preloaded with selectable steam and diesel...

Digitrax TF4 Function-Only DCC Decoder with Integrated Transponder - Hardwire     Four 125mA (250mA peak) function output for lights or other functions Functions can be turned on/off using F0-F12 Supports both 2 digit and 4 digit...

Digitrax TL1 Function-Only DCC Decoder with Integrated Transponding - Hardwire   Your TL1 can be used as: 1. Function only DCC decoder with transponding 2. Digitrax Transponder 3. Function only DCC decoder without transponding.   Single...

ESU 51956 LokSound 5 L Pin Header Adapter Board     Dimensions:  TBD - mm x mm x mm To Top Of Pins   On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems...

ESU 51957 21-HW - 21MTC Adapter Board 3 w/ AUX 3, AUX 4, AUX 5 & AUX 6 - NEM660 21MTC Integral Connector     Dimensions:  15.5mm x 31mm x 7mm To Top Of Pins Our new adapter board 3 for decoders with 21MTC interface is best suited for...

ESU 51958 21-HW - PluX22 Adapter Board 1 - NEM658 PluX22 Integral Connector   Our new adapter board 3 for decoders with PluX22 interface is best suited for everyone intending to digitise a loco without interface but with many functions without...

ESU 51959 LokSound and LokPilot L Adapter Board - Pin Connector to Solder Pad     This adapter board provides the suitable connections for your new LokSound/LokPilot L decoder.   The decoder can be plugged directly into the socket...

ESU 51966 Change Over Ski for LokSound or LokPilot w/ 21MTC     Dimensions:  24mm x 43mm x 12.7mm To Top Of Pins   Many railcars are equipped with a grinder at both ends. For proper function in block locations and for timely stopping...

ESU 51967 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector     Dimensions:  17mm x 27.2mm x 7mm To Top Of Pins   The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do...