Bulk Order

SBS4DCC Ring Terminal 00-90This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a #00-90 screw and have a lug to attach the decoder wire leads. The...

SBS4DCC Ring Terminal 00-90 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 00-90 x 3/16 Torx Head screws designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 00-90 screw and have...

SBS4DCC Ring Terminal 2-56This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a # 2-56 screw and have a lug to attach the decoder wire leads. The ring...

SBS4DCC Ring Terminal 2-56 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 2-56 x 1/8 screws designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 2-56 screw and have a lug to...

SBS4DCC Ring Terminal 4-40This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 4-40 screw and have a lug to attach the decoder wire leads. The ring...

SBS4DCC Ring Terminal 4-40 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 4-40 x 1/8 screws designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 4-40 screw and have a lug to...

SBS4DCC Sound Decoder Reprogramming This a reprogramming fee only for ESU PROGRAMMABLE SOUND DECODERS ONLY.  There is no charge for initial programming for decoders purchased from SBS4DCC.com.  INSTRUCTIONS Add this item to a shopping cart...

SBS4DCC Sound Decoder Reprogramming This a reprogramming fee only for ZIMO PROGRAMMABLE SOUND DECODERS ONLY.  There is no charge for initial programming for decoders purchased from SBS4DCC.com.  INSTRUCTIONS Add this item to a shopping...

SBS4DCC Throttle Lanyard   Tired of dropping your $150 throttles on the ground?  Use this simple solution to tie them and protect your investment.   Installations is easy; just follow these simple instructions.   Throttle Lanyard...

Soundtraxx 810012 Two-Pin Micro Connectors   These 2-pin connectors allow locomotive wiring to be quickly disconnected for easier painting and servicing. This kit includes a 2-pin connector set, 6" of red wire, 6" of black wire, and four pieces of...

Soundtraxx 810025 T3415 2.2mm Microbulb - 6 pk     2.1mm (0.094) diameter, 1.5 Volt, 35mA microbulbs for use as bulb replacements for additional Hyperlight effects for all SoundTraxx decoders.   Ideal as large diameter HO headlights...

Soundtraxx 810036 Insulative Tubing     This contains 24" of 24awg insulative tubing for covering exposed component leads and wires.  

Soundtraxx 810037 Shrink Tube Kit     The Shrink Tube Assortment provides 6" each of 1/16", 3/32". 1/8" and 1/4" diameter tubing, perfect for insulating your solder connections.  

Soundtraxx 810038 Exhaust Cam Set     A quick and easy way to install cams for cam-synchronized exhaust. For use with all SoundTraxx Steam Digital Sound Decoders with a cam output.  

Soundtraxx 810123 NMRA-Compatible 8-Pin Connector     This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.  

SoundTraxx 810128 Tsunami Replacement Capacitor 220 uF 25V     The capacitor is suitable for use with most Soundtraxx, Zimo, ESU LokSound, Digitrax, and MRC sound decoders.  Check the decoder specifications before installation.