Bulk Order

NCE DCC AIU01 Auxiliary Input UnitThe Auxiliary Input Unit (AIU) provides a means of connecting external devices such as switch contacts, Block Detectors (BD20), or other sensors to the NCE Cab Bus or Command Station. These external devices can be...

NCE DCC AR10 Auto Reverser with Circuit BreakerThe AR10 is an automatic reverse loop controller for DCC layouts. In addition it functions as a circuit breaker for the reverse loop. Very simple connections: Two wires to the main line and two wires to the...

NCE DCC BD20 Block Dectector UnitDetects DCC track current being drawn through a single track feeder. Isolated so there is no direct electrical connection to the track. Needs no external power for most operations. Can be connected to the NCE AIU01 or...

NCE DCC Button-Board - Local Push Button Add-On For Switch8-Mk2Add up to 16 push buttons to Switch8-Mk2 - Accomodate N.O. Pushbuttons or toggle switches - Simple hook up, 3 wires to Switch8-Mk2.  

NCE Cab 06e DCC Handheld Throttle Engineer cab with LED locomotive address display, uses a digital encoder which allows flexibility when controlling multiple locomotives at different speeds. Clear, easy-to-read display, select up to 6 locomotive...

NCE Cab 06e DCC Handheld Throttle Yard Engineer cab with LED display uses a more conventional potentiometer knob for speed control. Definite stop and starting points. Note** the speed setting of the knob is instantly applied to any locomotive selected...

NCE Cab 06p DCC Handheld Throttle Yard Engineer cab with LED display uses a more conventional potentiometer knob for speed control—definite stop and starting points. Note** The current speed setting of the knob is instantly applied to any...

NCE Cab 06r DCC Handheld ThrottleBasic Engineer cab with LED locomotive address display. It uses a digital encoder, allowing flexibility when controlling multiple locomotives at different speeds. Clear, easy-to-read display, select up to 6 locomotive...

NCE DCC Cab06 DCC Handheld Throttle Replacement Keypad Membrane   Replacement Part Only  

NCE DCC Coilcord-DIN 7 foot coiled cord with molded right angle DIN plug        

NCE DCC Coilcord-RJ 7' Coiled Throttle Cable A 7 foot four wire coiled cable for cabs. Has RJ12 connectors on both ends. This cable does not provide track power. Important Note! You cannot use this with a Power Cab UNLESS you ALSO have an SB5...

NCE DCC CP6 Circuit Protection - 6 BlockBasic Circuit Protector. You can connect up to Six Outputs with 1 amp of protection per output. Light bulbs protect locomotivr and commadn station from damage. Highly visible indication when you have a short...

NCE DCC CP6 Replacement Lamps - 1APack of 6 replacement lamps for the CP6 circuit protector. 1 Amp  

NCE CS02 Power House DCC Command Station Command Station Only. No track Power Booster. No Power Supply is included This Requires at least a 12v 1 amp power supply NOTE: Not for use with the Power Cab  

NCE DB5 Add-On Booster for SB5 5A DCC w/ P514 Power SupplyThis is a true 5 Amp booster compatible with all NCE and most other DCC systems. Includes an internationally approved 13.8v/12v 5 Amp Power Supply and 12 inch control bus cable for connection to...

NCE DCC Dual Relay Board - High power Isolated Output For Switch8-Mk2   Dual relay board for isolated output of Switch8 or Switch-It.   2 Amp Relay for Connection to Switch-It or Switch 8 Accessory Decoder