Bulk Order

Servette - Single Servo Controller The Servette is a DCC compatible accessory decoder capable of driving a servo motor. A servo is ideal for animation such as turnouts (switches), semaphores and crossing gates. The small size and simplicity of...

Tortoise 800-6100 Slow Motion Switch Machine Remote Mount This mounting adapter may be used to mount a Tortoise remotely from the turnout location. Flexible cable linkage allows installing the remote actuator above or below the table top and at varying...

Woodland Scenics Tidy Track TT4554 Track Cleaning Solution Use Clean Track Solution with Cleaning & Finishing Pads. It is specially formulated to remediate oil and remove dirt and grime for improved conductivity. Clean Track Solution is non-toxic,...

Woodland Scenics Tidy Track TT4575 Rail PalKeep the two-sided Rail Pal handy for quick fixes. Use to smooth track imprefections and remove dirt and track contaminants, such as paint, adhesives and grime. 2-sided for light and heavy cleaning. Does not...

ZIMO 22AWG Decoder Wire - 7m 7 m (22.9ft) stranded wire in choice of colors ( black, red, gray, orange, blue, white, yellow, green, brown, violet) This heavy gauge wire is recommended large scale applications and models having...

ZIMO 22AWG Decoder Wire - 7m 7 m (22.9ft) stranded wire in choice of colors ( black, red, gray, orange, blue, white, yellow, green, brown, violet) This heavy gauge wire is recommended large scale applications and models having...

ZIMO 22AWG Decoder Wire - 7m 7 m (22.9ft) stranded wire in choice of colors ( black, red, gray, orange, blue, white, yellow, green, brown, violet) This heavy gauge wire is recommended large scale applications and models having...

ZIMO 8-pin NMRA (NEM652) Male ConnectorThis is a 8-pin (2x4) male header on 2,54 mm pin spacing to make a ZIMO R - Type decoder from a normal hardwired decoder, e.g. convert a MX630 to a MX630R.This connector conforms to NMRA RP 9.1.1 Standard for...

ZIMO CAN BUS Ready Made Cable - CAN2.0 BUS To XNet Adapter Cable - 1m Long   ZIMO CAN BUS Ready Made Cables And Cable MaterialCAN2.0 BUS Adapter Cable (= remote cable) 1m for connecting MX32, MX10 MX32FU to (X-Net), only required for simultaneous...

ZIMO Capacitor - ELKSOMT Electrolytic Cap Collection For 10 - 20 Zimo decoders WITH 25 V - energy storage port (= integrated energy storage circuit) including MX631, MX632, ..., MX644, ..., several older types like MX640, MX642, .. General: "MTC-like"...

ZIMO Gold Capacitor - GOLDSORG Mini Electrolytic Super Cap Collection - 20x 1F / 2.7V   Goldcaps (1 F) for self-assembly of goldcap modules, consisting of 6 or 7 goldcaps connected in series as energy storage (stronger than with mini goldcaps) for...

ZIMO Gold Capacitor - MGOGURT Micro Electrolytic Super Cap Collection - 20x 0.3F / 2.7V   Miniature gold caps ( 0.3 F ) for MS580N18 decoders as an extension of the internal energy storage to 150,000 µF on a 5 V basis, or for...

The ZIMO StEin Stationary Equipment Module   "Stone" - modules ( St ationär- A directional modules) are of which are intended to be used together with a base unit of the ZIMO MX10 series as a digital central ZIMO digital control system...

The ZIMO StEin Stationary Equipment Module   "Stone" - modules ( St ationär- A directional modules) are of which are intended to be used together with a base unit of the ZIMO MX10 series as a digital central ZIMO digital control system...

ZIMO KOSL1 LED Controller - 0.2-1mA Constant Current Source     2 bars of 10 constant current sources for LEDs each, bendable.   For constantly bright LEDs when using an energy store on the decoder. To be used instead of a series resistor...

ZIMO KOSL2 LED Controller - 0.5-4mA Constant Current Source     2 bars of 10 constant current sources for LEDs each, bendable.   For constantly bright LEDs when using an energy store on the decoder. To be used instead of a series resistor...