Bulk Order

ESU 51962 Permanent Magnet s/a Marklin 235690 The 51962 magent is for armature 231440, D=19.1mm, for motor holder 231350. For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present field  winding,...

ESU 51963 Miniature Relay 1A 16V With our small relay, loads are controllable whose draw exceeds the decoders function output. Put the relay between output and load.    

ESU 51965 Permanent Magnet for Marklin 3015, ET800, ST800, Gauge 1 Motors Permanent magnet for Märklin 3015, ET800, ST800, Gauge 1 motors For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present...

ESU 53452 LokProgrammer Set You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco around the corner in the yard – on your model railroad? No problem with ESU’s LokProgrammer! One prerequisite: A...

ESU 53900 LokTester V2.1 DCC Decoder Test Station with ESU E24 Interface       ESU has introduced a new interface in 2021 with the release of the ESU 58923 LokSound 5 Nano NMRA DCC Sound Decoder - Hardwire and ESU...

ESU 53901 LokTester V2.0 DCC Decoder Test Station Extension     Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how...

ESU 53910 36AWG Decoder Wire - 10m - Pink Who doesn't know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from...

ESU 53911 36AWG Decoder Wire - 10m - Turquoise Who doesn't know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests...

ESU Replacement 2-pin Terminal Block for      50200 / 50210 EcoS  50310 CabControl  51900 / 53900 LokTester 53451 / 53452 LokProgrammer    

ESU Replacement 7-pin Terminal Block for EcoS 50200 ECoSniffer Port      

*** PLEASE NOTE: The ESU 50210 ECoS Command Station is specifically excluded from the FREE SHIPPING offer because of size and weight. ***     ECoS Blowout-Sale: We are selling off our remaining stock of the previous generation of the ECoS 2.1...

Gardner Bender Liquid Electrical Tape - Black This is hands down my favorite product I keep on my work bench.  I apply it to my work area with a tooth pick or even scrap or resistor wire lead.   I use it for everything... adhesive to seal...

GoodDealsDCC Connector Lead with Aligator Clips for The Programmer Test Track   2' long connector lead with alligator clips on one end and ring connectors on the other end   This product drop ships from the manufacturer and cannot be...

GoodDealsDCC Connector Lead for The Programmer Test Track   2' long connector lead with ring and spade connectors on ends   This product drop ships from the manufacturer and cannot be combined with any other item or order.  The is...

GoodDealsDCC Connector Lead for The Programmer Test Track   2' long connector lead with spade connectors on both ends   This product drop ships from the manufacturer and cannot be combined with any other item or order.  The is item...

GoodDealsDCC Connector Lead for The Programmer Test Track   2' long connector lead with ring connectors on both ends   This product drop ships from the manufacturer and cannot be combined with any other item or order.  The is item...