Bulk Order

ESU Wire Harness, Model Number 51950If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the...

ESU Wire Harness, Model Number 51951If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the...

ESU 51952 LokProgrammer Replacement USB Cable     As contemporary computers do not have a serial interface anymore we include a USB adapter cable. Since Windows Vista and Windows 7, cables that support USB 2.0 and are provided with a FTDI chip...

ESU 51956 LokSound 5 L Pin Header Adapter Board     Dimensions:  TBD - mm x mm x mm To Top Of Pins   On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems...

ESU 51957 21-HW - 21MTC Adapter Board 3 w/ AUX 3, AUX 4, AUX 5 & AUX 6 - NEM660 21MTC Integral Connector     Dimensions:  15.5mm x 31mm x 7mm To Top Of Pins Our new adapter board 3 for decoders with 21MTC interface is best suited for...

ESU 51958 21-HW - PluX22 Adapter Board 1 - NEM658 PluX22 Integral Connector   Our new adapter board 3 for decoders with PluX22 interface is best suited for everyone intending to digitise a loco without interface but with many functions without...

ESU 51959 LokSound and LokPilot L Adapter Board - Pin Connector to Solder Pad     This adapter board provides the suitable connections for your new LokSound/LokPilot L decoder.   The decoder can be plugged directly into the socket...

ESU 51960 Permanent Magnet s/a Marklin 220560 The 51960 magent is for armature 217450, D=24.5mm, for motor holder 216730, 211990, 228500. For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present...

ESU 51961 Permanent Magnet s/a Marklin 220450 The 51961 magent is for armature 200680, D=18.0mm, for motor holder 204900. For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present field  winding,...

ESU 51962 Permanent Magnet s/a Marklin 235690 The 51962 magent is for armature 231440, D=19.1mm, for motor holder 231350. For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present field  winding,...

ESU 51963 Miniature Relay 1A 16V With our small relay, loads are controllable whose draw exceeds the decoders function output. Put the relay between output and load.    

ESU 51965 Permanent Magnet for Marklin 3015, ET800, ST800, Gauge 1 Motors Permanent magnet for Märklin 3015, ET800, ST800, Gauge 1 motors For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present...

ESU 51966 Change Over Ski for LokSound or LokPilot w/ 21MTC     Dimensions:  24mm x 43mm x 12.7mm To Top Of Pins   Many railcars are equipped with a grinder at both ends. For proper function in block locations and for timely stopping...

ESU 51967 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector     Dimensions:  17mm x 27.2mm x 7mm To Top Of Pins   The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do...

ESU 51968 21-HW - 21MTC Adapter Board w/ AUX 3, AUX 4, AUX 5 & AUX 6     Dimensions:  20mm x 40mm x 7mm To Top Of Pins   The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if...

ESU 51970 NEM660 21MTC Integral Connector I/O Expansion Board (4x AUX, 2x Servo, Smokeunit) for LokSound, LokPilot V4.0     Dimensions:  15.5mm x 30.3mm x 8.4mm To Top Of Pins   With this expansion board you can easily expand your...