Bulk Order

NCE - ZIMO - Roco Z21 Replacement Green Terminal Block 2 Position 3.5mm The terminal is suitable for use with the NCE (Power Cab, Twin, DB5, SB5), QSI Programmer, Roco Z21, Zimo MXULF and other products. It is the perfect replacement for the...

NCE D13J DCC Decoder - NMRA 9-pin JST to Hardwire (10 Pk) D13J Decoder - new smaller replacement for D13SRJ   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Direct plug in to Athearn and other locos equipped with NMRA 9 pin...

NCE D13J DCC Decoder - NMRA 9-pin JST to Hardwire   D13J Decoder - new smaller replacement for D13SRJ   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Direct plug in to Athearn and other locos equipped with NMRA 9 pin...

NCE D13J DCC Decoder NMRA - NMRA 9-pin JST to Hardwire   D13J Decoder - new smaller replacement for D13SRJ   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Direct plug in to Athearn and other locos equipped with NMRA 9...

NCE D13NHJ DCC Decoder w/ Small No-Halt Module - NMRA 9-pin JST to Hardwire   Direct plug in to Athearn and other locos equipped with NMRA 9 pin DCC  Quick Plug with small no halt module installed Caution: Not for use with more than 15...

NCE D13NHP DCC Decoder w/ Small No-Halt Module - NEM652 8-pin Wired Plug   Direct plug in to locos equipped with NMRA 8 pin plug Caution: Not for use with more than 15 Volts track voltage   NCE Decoders offer the following features: Torque...

NCE D13W DCC Decoder - Hardwire D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth low...

NCE D13W DCC Decoder - Hardwire D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth low...

NCE D13W DCC Decoder - Hardwire   D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth...

NCE D13WP DCC Decoder - NEM652 8-pin Wired PlugD13WP decoder with 8 pin plug - new smaller replacement for D13SRP Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Silent Running torque compensated motor drive Torque Compensation for...

NCE D16MTC DCC Decoder - NMRA-NEM660 21MTC Integral Connector6 function decoder with direct plug into locos equipped with NMRA 21 pin MTC (NEM660) plug.   Dimensions: 0.900 x 0.615 x .180 inches 23 x 16 x 4.7 mm   Features of this...

NCE D408SR DCC Decoder - Screw TerminalThis is a true 4 Amp (12 Amp peak) self contained decoder for S, O and large scale with connectorized wire harnesses. Functions supported: Headlight(s) plus seven additional function outputs. All function outputs...

NCE D808SR DCC Decoder O-G USA Trains Charles Ro - Screw Terminal This Silent RunningTM decoder is specifically designed for high stall current large scale locomotives such as those produced by USA Trains and Charles Ro. The decoder has 8 function...

NCE DA-SR DCC Decoder - HO Drop-in AT-Style BoardEasy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto 1000. This decoder has five function outputs.   Fits Models: Atlas GP38, GP40, RS1/2/3, C424/5,...

NCE DA-SR DCC Decoder - HO Drop-in AT-Style BoardEasy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto 1000. This decoder has five function outputs.   Fits Models: Atlas GP38, GP40, RS1/2/3, C424/5,...

NCE DCC "Q-Snap" Quad Twin Coil Stationary Switch Decoder FOR TWIN COIL SWITCH MACHINES ONLY   All new easy programming! Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc) Supports the full range of DCC accessory addresses...