Bulk Order

NCE DCC P314 Power Supply 13.8V 3A for DCC TwinP314 13.8v DC 3 Amp Power Supply for DCC Twin. Do not purchase this for use with the Power Cab. Don't forget to use a REAL surge protector not a power strip.  

NCE DCC P514 Power Supply 12V - 13.8V 5A for DB5 - PB5 - SB512/13.8 Volt DC, 5 Amp internationally approved power supply. This is a replacement power supply for the SB5 Smartbooster. Do not purchase this for use with the Power Cab. The Power Cab requires...

NCE DCC P515 Power Supply 5A 15V for DB5 - PB5 - SB5     P515 15 Volt AC, 5 Amp Linear Power Supply suitable for PH-Pro, PB105, Digitrax, etc. Approved for US use only. This is a primary 5 amp AC transformer with an internal 5 amp fuse...

NCE DCC P519 Power Supply 5A 19V for PH5 - PB5a The P519 is a 19 Volt DC, 4.74 amps, 90 Watt with US power cord. Power supply suitable for use with the following NCE products: PH5 (5 Amp system) and PB5a Booster. Note: For PowerPro (5 Amp system) PB105...

NCE DCC PB105 Booster   5 Amp booster compatible with most NCE DCC systems. This item is not produced in large quantities. Shipping may be delayed if out of stock. A 5 amp Power Supply is required but not included. Order the P515 part number...

NCE DCC PB110 Booster10 Amp Power Booster recommended for O, G and other large scales. The PB-110A provides true 10 Amps of continuous power to your track. Enough to handle MUs of the largest locomotives. A 10 amp Brutus Power Supply is required but...

NCE DCC PB5 Booster 5A DCC w/ P514 Power SupplyContinuous 5 Amp booster that can be added to your existing DCC system. Includes P514 12v/13.8v DC International Power Supply with US power cord Don't forget to use a REAL surge protector not a power...

NCE PH-Box Power Pro DCC Command Station CS & 5A Box   Command Station and 5 Amp Booster combined in one box. A 5 amp Power Supply is required but not included. Order the P515 part number (5240215)  

NCE PH-Pro Power Pro 5A DCC Command Station This 5 Amp starter set has everything you need to get DCC equipped trains up and running (except power transformer, see P515). It includes the user friendly Pro Cab. You can be up and running in less than 20...

NCE PH-Pro R Power Pro 5A DCC Command Station - Radio EquippedThis 5 Amp starter set has everything you need to get DCC equipped trains up and running (except power transformer, see P515). It includes the user friendly Pro Cab. You can be up and running...

NCE Power Pro 10A DCC Command Station The PH-10 has all the same features as our Power Pro 5 Amp system described previously, but with 10 Amps of power for O-Scale and Large Scale (G) layouts. Requires a 18V, 10-12 amp power supply such as the Brutus...

NCE PH10R Power Pro 10A DCC Command Station - Radio Equipped The PH10-R is a wireless equipped system. It is designed to eliminate the need for a tethered throttle. All features of the Pro Cab are usable while in radio mode. Up to 60 additional radio and...

NCE DCC Power Cab Auto-SW Program Track SwitchAuto SW: Adds a program track output to the Power Cab. Prevents accidental programming of locos on your mainline track when using Program Track mode. Automatically disconnects your main line when in...

NCE DCC Power Cab DCC Command StationAn entire DCC system in the palm of your hand. This 2 Amp system can operate up to 4 HO locomotives or 8 N scale locomotives running at the same time. Provides all of the capability and ease of use that you’ve...

NCE DCC Power Cab PCP Cab Bus Facia Connection PanelPower Cab connection panel has jacks on rear for track output and power input from the P114 power supply. The Power Cab plugs in on the front in the LEFT side with the flat cable. Facia Plate and two...

NCE DCC USB Interface PC Connection PanelComputer Interface for Power Cab. Requires the NCE Power Cab, a USB cable, and a computer with one free USB port. Plug and play with Windows 10: No driver installation needed. Remove all jumpers from board for...