Soundtraxx 810135 Wire Harness - NMRA 9-pin JST to NEM652 8-pin Wired Plug     This harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.

Soundtraxx 810134 3mm LED 6-Pack, Golden White     Golden White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated...

Soundtraxx 810133 3mm LED 6-Pack, Sunny White     Sunny White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see your decoder manual). The cathode or minus (-) side is indicated...

SoundTraxx 810132 DBX-9000 Locomotive-To-Tender Wiring Kit - NMRA 9-pin Micro JST Adapter Board to Hardwire     The DBX-9000 is a compact 9-wire connector and harness assembly for use with universal-style DCC decoders. It is designed to...

SoundTraxx 810131 Mega Bass Speaker 28mm Square 8 ohm 2 watt   This is our largest Megabass speaker which provides the best low frequency bass sounds for your steam, diesel, and electric models. Dimensions: 28 x 28 x 11.2mm(D) Frequency Response:...

SoundTraxx 810130 Mega Bass Speaker 27mm Round 8 ohm 2 watt     This speaker is great for boosting the low frequencies in most diesel and “big” steam sounds. Dimensions: 27 x 14.3mm(D) Frequency Response: 350Hz -...

SoundTraxx 810129 Mega Bass Speaker 23mm Square 8 ohm 2 watt   This speaker is perfect for enhancing the low bass sounds that are found in most diesel decoders. It is well worth the extra effort! Dimensions: 23 x 23 x 10.2mm(D) Frequency Response:...

SoundTraxx 810128 Tsunami Replacement Capacitor 220 uF 25V     The capacitor is suitable for use with most Soundtraxx, Zimo, ESU LokSound, Digitrax, and MRC sound decoders.  Check the decoder specifications before installation.  

Soundtraxx 810123 NMRA-Compatible 8-Pin Connector     This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.  

Soundtraxx 810121 14x25mm Speaker Gasket Kit (package of 4)     These double-sided adhesive gaskets take the mess out of mounting our 14mm x 25mm (0.56" x 1") speakers (P.N. 810112).  

Soundtraxx 810120 20x40mm Speaker Gasket Kit (package of 4)     These double-sided adhesive gaskets take the mess out of mounting our 20mm x 40mm (1.56" x 0.78") speakers (P.N. 810103).  

SoundTraxx 810119 28mm Speaker Gasket Kit (package of 4)     These double-sided adhesive gaskets take the mess out of mounting our 1 speakers (P.N. 810054).  

SoundTraxx 810118 20mm Speaker Gasket Kit (package of 4)     These double-sided adhesive gaskets take the mess out of mounting our ¾ speakers (P.N. 810053).  

SoundTraxx 810115 Speaker 20x35mm Rectangular 8 ohm 2.0 watt     If you have more space, this speaker is great for larger models. Dimensions: 35 x 20 x 5.3mm(D) Frequency Response: 300Hz - 5kHz Impedance: 8 Ohms Peak Power: 2...

SoundTraxx 810114 Speaker 30mm Round 8 ohm 1.0 watt     If you have more space, this speaker is great for larger models. Dimensions: 30 x 5.3mm(D) Frequency Response: 325Hz - 20kHz Peak Power: 1 Watt Impedance: 8 Ohms  

SoundTraxx 810113 Speaker 16x35mm Rectangular 8 ohm 2.0 watt     This small oval speaker is ideal for narrow hood diesels. Dimensions: 35 x 16 x 8mm(D) Frequency Response: 250Hz - 13kHz Peak Power: 2 Watts Impedance: 8 Ohms  

SoundTraxx 810112 Speaker 14x25mm Rectangular 8 ohm 1.5 watt     This small speaker is perfect for narrow hood diesels and anywhere else where space is at a premium. Dimensions: 25 x 14 x 5.2mm(D) Frequency Response: 300Hz - 20kHz Peak...

SoundTraxx 810110 28mm Baffle Kit     This snap-together baffle kit is designed for use with our 28mm diameter speaker (P.N. 810054).  

Soundtraxx 810109 20mm Baffle Kit     This snap-together baffle kit is designed for use with our 20mm diameter speaker (P.N. 810053).  

SoundTraxx 810108 15mm Baffle Kit     This snap-together baffle kit is designed for use with our 15mm diameter speaker (P.N. 810089).    

SoundTraxx 810103 Speaker 20x40mm Rectangular 8 ohm 1.5 watt     This is a great speaker for many HO and S-scale locomotives. Dimensions: 40 x 20 x 8mm(D) Frequency Response: 550Hz - 12kHz Peak Power: 1.5 Watts Impedance: 8...

SoundTraxx 810090 Speaker 50x90mm Rectangular 8 ohm 5.0 watt     This is one of our largest speakers for use with the TSU-4400 in O-scale or larger models. Dimensions: 50 x 90 x 37.5mm(D) Frequency Response: 230Hz - 20kHz Peak Power: 5...

SoundTraxx 810089 Speaker 15mm Round 8 ohm 0.5 watt     This tiny, high-output speaker is suitable for N-scale and larger models. Dimensions: 15 x 3.5mm(D) Frequency Response: 400Hz - 20kHz Peak Power: 0.5 Watt Impedance: 8 Ohms  

SoundTraxx 810078 Speaker 28x40mm Rectangular 8 ohm 1.0 watt   Great sound for your train if you can fit this one in your model! Dimensions: 40 x 28.5 x 11.3mm(D) Frequency Response: 250Hz - 20kHz Power: 1 Watt (Nominal) 2 Watts...

SoundTraxx 810069 Replacement Tsunami Power Harness, Steam and Diesel - NMRA 9-pin JST to Hardwire     Replacement 9-wire to JST power harness for all TSU-2200 or ECO-200 Digital Sound Decoders.    

SoundTraxx 810068 Replacement Tsunami Speaker Harness, Steam - Hardwire - NMRA 3-pin JST Plug to Hardwire     Replacement 3-Wire to JST Speaker and Cam harness.   

Soundtraxx 810053 Speaker     This tiny, high-output speaker is suitable for N-scale and larger models.  Dimensions: 20 x 3.2mm(D) Frequency Response: 475Hz - 9kHz Peak Power: 1 Watt Impedance: 8 Ohms The speaker is...

Soundtraxx 810038 Exhaust Cam Set     A quick and easy way to install cams for cam-synchronized exhaust. For use with all SoundTraxx Steam Digital Sound Decoders with a cam output.  

Soundtraxx 810037 Shrink Tube Kit     The Shrink Tube Assortment provides 6" each of 1/16", 3/32". 1/8" and 1/4" diameter tubing, perfect for insulating your solder connections.  

Soundtraxx 810036 Insulative Tubing     This contains 24" of 24awg insulative tubing for covering exposed component leads and wires.  

Soundtraxx 810025 T3415 2.2mm Microbulb - 6 pk     2.1mm (0.094) diameter, 1.5 Volt, 35mA microbulbs for use as bulb replacements for additional Hyperlight effects for all SoundTraxx decoders.   Ideal as large diameter HO headlights...

Soundtraxx 810012 Two-Pin Micro Connectors   These 2-pin connectors allow locomotive wiring to be quickly disconnected for easier painting and servicing. This kit includes a 2-pin connector set, 6" of red wire, 6" of black wire, and four pieces of...

SBS4DCC Ring Terminal 4-40 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 4-40 x 1/8 screws designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 4-40 screw and have a lug to...

SBS4DCC Ring Terminal 4-40This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 4-40 screw and have a lug to attach the decoder wire leads. The ring...

SBS4DCC Ring Terminal 2-56 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 2-56 x 1/8 screws designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 2-56 screw and have a lug to...

SBS4DCC Ring Terminal 2-56This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a # 2-56 screw and have a lug to attach the decoder wire leads. The ring...

SBS4DCC Ring Terminal 0-80 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 0-80 x 1/8 screws designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 0-80 screw and have a lug to...

SBS4DCC Ring Terminal 0-80This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 0-80 screw and have a lug to attach the decoder wire leads. The ring...

SBS4DCC Ring Terminal 00-90 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 00-90 x 3/16 Torx Head screws designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 00-90 screw and have...

SBS4DCC Ring Terminal 00-90This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a #00-90 screw and have a lug to attach the decoder wire leads. The...

SBS4DCC Sound Decoder Reprogramming This a reprogramming fee only for ZIMO PROGRAMMABLE SOUND DECODERS ONLY.  There is no charge for initial programming for decoders purchased from SBS4DCC.com.  INSTRUCTIONS Add this item to a shopping...

SBS4DCC Sound Decoder Reprogramming This a reprogramming fee only for ESU PROGRAMMABLE SOUND DECODERS ONLY.  There is no charge for initial programming for decoders purchased from SBS4DCC.com.  INSTRUCTIONS Add this item to a shopping cart...

SBS4DCC Decoder Preparation Service SBS4DCC offers bench services to prepare your decoder for your installation project. Scope of work is unlimited but typically involves one of the following options: CV Programming Connector Addition or...

SBS4DCC 10-pk HO Scale Athearn Headlight Housing Lens     Finally! A simple LED replacement for those dim and unfriendly Athearn 1.5V incandescent bulbs.  No more melted shells.  No more burnt out bulbs.    Now you can enjoy...

SBS4DCC Aux 3-4 Logic Level Function Amplifier Board Have you ever wished you could turn those logic function on your ESU or Zimo decoder into useable function outputs? Have you ever needed one more function to finish a project and added a second decoder...

SBS4DCC - ESU 53900 LokTester Decoder Test Module Add-On Kit for 58821 58921     The kit includes:   1x Base 1x Top Weight Box 17x POGO Pins   Weights and wire are required but not included.  I also recommend a standard DCC...

SBS4DCC - ESU 53900 LokTester Decoder Test Module Add-On Kit for 58721 58731 58741 MX605 MX660     The kit includes:   1x Base 1x Top Weight Box 25x POGO Pins   Weights and wire are required but not included.  I also recommend a...

SBS4DCC 5050 SMD Warm White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 5050 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for use...

SBS4DCC 5050 SMD Warm White LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 5050 SMD Warm White LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm resistor that comes already attached to the cathode making it...

SBS4DCC Plastic Double Throttle Holder for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you need a safe...

SBS4DCC Plastic Double Throttle Holder for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you need a safe...

SBS4DCC Plastic Single Throttle Holder for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you need a safe...

SBS4DCC Plastic Case w/ Grips Type 2 for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you find the case...

SBS4DCC Plastic Case w/ Grips for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you find the case slippery...

SBS4DCC 3528 SMD Warm White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 3528 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for use...

SBS4DCC 3528 SMD Warm White LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 3528 SMD Warm White LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm resistor that comes already attached to the cathode making it...

SBS4DCC HO Scale DCC-Friendly Universal Long Passenger Car Light Kit   This listing is for (1) SBS4DCC HO Scale DCC-Friendly Universal Long Passenger Car Light Kit. The Lighting Kit is R-T-R and ready to install in your passenger car fleet...

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wipers This product is perfect for use in making sound cars, adding interior lighting to passenger cars and cabeese.  The contacts are suitable...

SBS4DCC 1206 SMD Warm White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 1206 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for use...

SBS4DCC 1206 SMD Warm White LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 1206 SMD Warm White LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm resistor that comes already attached to the cathode making it...

SBS4DCC 1206 SMD Bright White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 1206 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for...

SBS4DCC 0805 SMD Warm White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0805 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for use...

SBS4DCC 0805 SMD Warm White LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 0805 SMD Warm White LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm resistor that comes already attached to the cathode making it...

SBS4DCC 0805 SMD Red LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0805 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for use with...

SBS4DCC 0805 SMD Red LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 0805 SMD Red LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm resistor that comes already attached to the cathode making it suitable for...

SBS4DCC 0805 SMD Bright White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0805 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for...

SBS4DCC 0605 Bi-Color SMD Warm White - Red LED Pre-Wired 38ga Magnet Wire This listing is for (1) 0605 Surface Mount LED pre-wired with 38ga enamel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it...

SBS4DCC 0603 SMD Warm White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0603 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for use...

SBS4DCC 0603 SMD Warm White LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 0603 SMD Warm White LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm resistor that comes already attached to the cathode making it...

SBS4DCC 0603 SMD Red LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0603 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for use with...

SBS4DCC 0603 SMD Red LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 0603 SMD Red LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm resistor that comes already attached to the cathode making it suitable for...

SBS4DCC 0603 SMD Bright White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0603 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for...

SBS4DCC 0402 SMD Warm White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0402 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for use...

SBS4DCC 0402 SMD Warm White LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 0402 SMD Warm White LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm resistor that comes already attached to the cathode making it...

SBS4DCC 0402 SMD Red LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0402 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for use with...

SBS4DCC 0402 SMD Red LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 0402 SMD Red LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm resistor that comes already attached to the cathode making it suitable for...

SBS4DCC 0402 SMD Bright White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0402 Surface Mount LED pre-wired with 42ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable for...

SBS4DCC 0201 Nano SMD Warm White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 0201 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that should be attached to the cathode making it suitable...

SBS4DCC "Sugar Cube" Speaker Enclosure Only (No Speaker)     This offering offoring is for the high quality, carbon fiber reinforced sound chamber manufactured by Streamlined Backshop.  Refer to the specific speaker model for more details...

SBS4DCC "Sugar Cube" Speaker 9x16mm w/ Half Deep Side-By-Side Twin Coupled Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our...

SBS4DCC "Sugar Cube" Speaker 9x16mm w/ Half Deep Twin Coupled Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our diminutive locos...

SBS4DCC "Sugar Cube" Speaker 9x16mm 8 ohm .7 watt w/ Half Deep Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our diminutive...

SBS4DCC "Sugar Cube" Speaker 8x12mm w/ Half Deep Side-By-Side Twin Coupled Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our...

SBS4DCC "Sugar Cube" Speaker 8x12mm w/ Half Deep Twin Coupled Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our diminutive locos...

SBS4DCC "Sugar Cube" Speaker 8x12mm 8 ohm .7 watt w/ Half Deep Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our diminutive...

SBS4DCC "Sugar Cube" Speaker 13x18mm w/ Half Deep Side-By-Side Twin Coupled Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our...

SBS4DCC "Sugar Cube" Speaker 13x18mm w/ Half Deep Twin Coupled Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our diminutive...

SBS4DCC "Sugar Cube" Speaker 13x18mm 8 ohm 1 watt w/ Half Deep Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our...

SBS4DCC "Sugar Cube" Speaker 11x15mm w/ Half Deep Side-By-Side Twin Coupled Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our...

SBS4DCC "Sugar Cube" Speaker 11x15mm w/ Half Deep Twin Coupled Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our diminutive...

SBS4DCC "Sugar Cube" Speaker 11x15mm 8 ohm 1 watt w/ Half Deep Sound Chamber     Finally! A small speaker that will rock your world.     We pay big bucks for the finest hardware we can to get decent sound from our diminutive...

SBS4DCC "Sugar Cube" Speaker 11x15mm 8 ohm 1 watt w/ N Cab Roof Sound Chamber for Life-Like Proto N FM Erie-built     The N Cab Roof sound chamber is designed to be suspended from N scale steam and diesel engine cab roofs as well as streamlined...

SBS4DCC "Sugar Cube" Speaker 9x16mm w/ Twin Coupled Sound Chamber for Con-Cor U50     This Sound Chamber is designed specifically for the Con-Cor U50 model with special clearance for the plastic screw insulator that protrudes upward from...

SBS4DCC Speaker Enclosure 23mm Round     The speaker enclosure is suitable for use with the following speaker models:   ZIMO Speaker - 23mm Round     The enclosure is made from plastic.    The enclosure features a...

SBS4DCC Speaker Enclosure 20mm Round     The speaker enclosure is suitable for use with the following speaker models:   TCS 1554 20mm (0.79") Round Speaker 8 ohm .8W   ZIMO Speaker - 20mm Round     The composite plastic...

SBS4DCC Speaker Enclosure 20x40mm Rectangular     The speaker enclosure is suitable for use with the following speaker models:   Soundtraxx 810103 Speaker 20x40mm Rectangular 8 ohm 1.5 watt     The composite plastic enclosure...

SBS4DCC Speaker Enclosure 20x35mm Rectangular     The speaker enclosure is suitable for use with the following speaker models:   SoundTraxx 810115 Speaker 20x35mm Rectangular 8 ohm 2.0 watt     The composite plastic enclosure...

SBS4DCC Speaker Enclosure 32mm Round     The speaker enclosure is suitable for use with the following speaker models:   TCS 1695 32mm (1.26") Round Speaker 8 Ohm 1W     The composite plastic enclosure is made from a carbon...

SBS4DCC Speaker Enclosure 30mm Round     The speaker enclosure is suitable for use with the following speaker models:   SoundTraxx 810114 Speaker 30mm Round 8 ohm 1.0 watt   TCS 1696 30mm (1.18") Round Speaker 8 Ohm...

SBS4DCC Speaker Enclosure 28mm Round     The speaker enclosure is suitable for use with the following speaker models:   Digitrax SP28288 Speaker 28mm Round 8 Ohm 1 watt   Soundtraxx 810054 Speaker 28mm Round 8 ohm 1.0...