Adapter Boards

ESU 51956 LokSound 5 L Pin Header Adapter Board     Dimensions:  TBD - mm x mm x mm To Top Of Pins   On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems...

ESU 51957 21-HW - 21MTC Adapter Board 3 w/ AUX 3, AUX 4, AUX 5 & AUX 6 - NEM660 21MTC Integral Connector     Dimensions:  15.5mm x 31mm x 7mm To Top Of Pins Our new adapter board 3 for decoders with 21MTC interface is best suited for...

ESU 51958 21-HW - PluX22 Adapter Board 1 - NEM658 PluX22 Integral Connector   Our new adapter board 3 for decoders with PluX22 interface is best suited for everyone intending to digitise a loco without interface but with many functions without...

ESU 51959 LokSound and LokPilot L Adapter Board - Pin Connector to Solder Pad     This adapter board provides the suitable connections for your new LokSound/LokPilot L decoder.   The decoder can be plugged directly into the socket...

ESU 51966 Change Over Ski for LokSound or LokPilot w/ 21MTC     Dimensions:  24mm x 43mm x 12.7mm To Top Of Pins   Many railcars are equipped with a grinder at both ends. For proper function in block locations and for timely stopping...

ESU 51967 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector     Dimensions:  17mm x 27.2mm x 7mm To Top Of Pins   The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do...

ESU 51968 21-HW - 21MTC Adapter Board w/ AUX 3, AUX 4, AUX 5 & AUX 6     Dimensions:  20mm x 40mm x 7mm To Top Of Pins   The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if...

ESU 51970 NEM660 21MTC Integral Connector I/O Expansion Board (4x AUX, 2x Servo, Smokeunit) for LokSound, LokPilot V4.0     Dimensions:  15.5mm x 30.3mm x 8.4mm To Top Of Pins   With this expansion board you can easily expand your...

ESU 51971 LokSound XL Pin Connector Adapter Board     Dimensions:  42.6 mm x 62 mm x 9.1 mm To Top Of Pins Adapter board for LokSound XL with PIN connectors.  For professionals in digital model railroading there is a new adapter...

ESU 51992 Adapter Board - 24-pol ESU E24 Integral Connector to NEM658 PluX16 Integral Connector This adapter board can be connected to all decoders with an E24 connection and offers a PluX16 interface on the locomotive side. This means, for example, a...

ESU 51993 Wire Harness Adapter Board - 88mm - NEM662 Next18 Integral Connector to Hardwire   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses...

ESU 51994 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 6-pin NEM651   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51995 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 8-pin NEM652   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51996 Adapter Board - NEM662 Next18 Integral Connector to NEM658 PluX16 Integral Connector   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our...

ESU 51997 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NEM658 PluX12 Integral Connector   This adapter board can be docked to all decoders with Next18 connection and offers a PluX12 interface on the locomotive...

ESU 51998 Adapter Board - NEM662 Next18 Integral Connector to NEM660 21MTC Integral Connector     This small adapter board is a practical helper for equipping some models (e.g. from Liliput) with a LokSound decoder: A 21MTC interface was...

ESU 51999 Adapter Board - NEM662 Next18 Integral Connector to Hardwire   The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...

ESU 53952 Adapter Board - NEM660 21MTC Integral Connector to BLI Steam Paragon 3 & 4 With the help of the BLI Paragon 3/4 (P34) adapter board, H0 Scale tender steam locomotives from Broadway Limited (BLI), in which a Paragon 3 or Paragon 4 decoder...

ESU 53953 Adapter Board - 24-pol ESU E24 Integral Connector to Hardwire The 24-pol ESU E24 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...

ESU 53954 Adapter Board - 24-pol ESU E24 Integral Connector to N Drop-in Board for Kato Wide Body Type This adapter board with dimensions 47.5mm x 14.0mm fits in such Kato (USA) N-gauge locomotives that have a wide body design such as F-units. It...

ESU 53955 Adapter Board - 24-pol ESU E24 Integral Connector to HO Drop-in AT-Style Adapter Board w/ Integrated PowerPack This adapter board with the dimensions 54.0mm x 17.0mm has an ESU PowerPack ‘On Board’. Although the capacitors...

ESU 53956 Adapter Board - NEM662 Next18 Integral Connector to RCN114 14MTC Integral Connector Using this adapter board with the dimensions 13.5mm x 8.4mm, Minitrix® locomotives with MTC14 interface can finally be equipped with a LokSound decoder at...