NCE DCC

Model Railroad Technologies Accutrack II Train Speedometer   Note: This is a portable, stand-alone speed detection device. It works with DC or DCC layouts. It works with any DCC system since they are not connected in any way.   Introducing the...

NCE D13J DCC Decoder - NMRA 9-pin JST to Hardwire (10 Pk) D13J Decoder - new smaller replacement for D13SRJ   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Direct plug in to Athearn and other locos equipped with NMRA 9 pin...

NCE D13J DCC Decoder - NMRA 9-pin JST to Hardwire   D13J Decoder - new smaller replacement for D13SRJ   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Direct plug in to Athearn and other locos equipped with NMRA 9 pin...

NCE D13J DCC Decoder NMRA - NMRA 9-pin JST to Hardwire   D13J Decoder - new smaller replacement for D13SRJ   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Direct plug in to Athearn and other locos equipped with NMRA 9...

NCE D13NHJ DCC Decoder w/ Small No-Halt Module - NMRA 9-pin JST to Hardwire   Direct plug in to Athearn and other locos equipped with NMRA 9 pin DCC  Quick Plug with small no halt module installed Caution: Not for use with more than 15...

NCE D13NHP DCC Decoder w/ Small No-Halt Module - NEM652 8-pin Wired Plug   Direct plug in to locos equipped with NMRA 8 pin plug Caution: Not for use with more than 15 Volts track voltage   NCE Decoders offer the following features: Torque...

NCE D13W DCC Decoder - Hardwire D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth low...

NCE D13W DCC Decoder - Hardwire D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth low...

NCE D13W DCC Decoder - Hardwire   D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth...

NCE D13WP DCC Decoder - NEM652 8-pin Wired PlugD13WP decoder with 8 pin plug - new smaller replacement for D13SRP Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Silent Running torque compensated motor drive Torque Compensation for...

NCE D16MTC DCC Decoder - NMRA-NEM660 21MTC Integral Connector6 function decoder with direct plug into locos equipped with NMRA 21 pin MTC (NEM660) plug.   Dimensions: 0.900 x 0.615 x .180 inches 23 x 16 x 4.7 mm   Features of this...

NCE D408SR DCC Decoder - Screw TerminalThis is a true 4 Amp (12 Amp peak) self contained decoder for S, O and large scale with connectorized wire harnesses. Functions supported: Headlight(s) plus seven additional function outputs. All function outputs...

NCE D808SR DCC Decoder O-G USA Trains Charles Ro - Screw Terminal This Silent RunningTM decoder is specifically designed for high stall current large scale locomotives such as those produced by USA Trains and Charles Ro. The decoder has 8 function...

NCE DA-SR DCC Decoder - HO Drop-in AT-Style BoardEasy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto 1000. This decoder has five function outputs.   Fits Models: Atlas GP38, GP40, RS1/2/3, C424/5,...

NCE DA-SR DCC Decoder - HO Drop-in AT-Style BoardEasy installation in many locomotives with Kato drive mechanisms such as Atlas/Stewart/Kato and Proto 1000. This decoder has five function outputs.   Fits Models: Atlas GP38, GP40, RS1/2/3, C424/5,...

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator contains three programmable lighting outputs with a...

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator contains three programmable lighting outputs with a...

NCE DCC Light-It Function-Only Lighting And Signal DCC Decoder - Hardwire   The Light-It is a multi-purpose programmable DCC lighting decoder.  One Light-It contains three programmable lighting outputs with a complete array of lighting effects...

NCE DCC Light-It Function-Only Lighting And Signal DCC Decoder - Hardwire   The Light-It is a multi-purpose programmable DCC lighting decoder.  One Light-It contains three programmable lighting outputs with a complete array of lighting effects...

NCE DCC Light-It Function-Only Lighting And Signal DCC Decoder - Hardwire   The Light-It is a multi-purpose programmable DCC lighting decoder.  One Light-It contains three programmable lighting outputs with a complete array of lighting effects...

NCE Medium "No-Halt" DCC Decoder Stay-Alive Device - Hardwire   Dimensions: 2.14" x 0.640 x 0.400" (54 x 16 x 10 mm) High power version for larger locomotives - Eliminates or reduces the following due to dirty track or unwired switch...

NCE N12-NEM DCC Decoder - NEM651 6-pin Integral Connector     Plug in 4 function decoder with 6 pin NEM 651 connector.   NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Silent...

NCE N12A0 DCC Decoder - N Drop-in Board for Atlas GP40-2, U25B, SD35, Trainmaster, B23-7 and others     Plug and Play decoder for the N scale Atlas GP40-2, U25B, B23-7, 30-7, 36-7, GP38, SD25, Trainmaster, etc. 1 Amp (1.25 peak) rating. Golden...

NCE N12A0E DCC Decoder - N Drop-in Board for InterMountain SD40T-2 / SD45T-2   Plug and Play decoder for the N scale Intermountain SD40T-2 and SD45T-2 Tunnel Motor. 1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed extended to...

NCE N12A1 DCC Decoder - N Drop-in Board for Atlas SD60, SD60M, SD50 and others   Plug and Play decoder for the N scale Atlas SD50, SD60M, SD60. 1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed.    NCE Decoders offer...

NCE N12A2 DCC Decoder - N Drop-in Board for Atlas GP7/GP9, GP15, GP30, GP35   N Scale Plug and Play decoder for the new Atlas "Classic" locomotives GP30, GP35, GP7, GP9.  1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed...

NCE N12K0A DCC Decoder - N Drop-in Board for Kato P42, PA1 & E8   Drop in decoder for N-Scale Kato PA1, E8, Genesis P42, etc, White LEDs.  1 Amp (1.25 peak) rating.      NCE Decoders offer the following features:...

NCE N12K0B DCC Decoder - N Drop-in Board for Kato F3 A & B   Drop in decoder for Kato N-Scale F3 A&B, F7 A&B and others, White LEDs.  1 Amp (1.25 peak) rating.    NCE Decoders offer the following features: Torque...

NCE N12SR DCC Decoder - Hardwire     NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Programmable Start, Mid and Maximum speed works for all speed modes Motor rating 1 Amp continuous, 1.25...

NCE N14A3 DCC Decoder - N Drop-in Board for Atlas GP39-2 and others     Direct plug in to Atlas GP39-2, Intermountain SD40-2 plus other plug-and-play N Scale locos   NCE Decoders offer the following features: Torque Compensation for...

NCE N14IP DCC Decoder - NEM652 8-pin Integral ConnectorDirect plug in for Con Cor N-Scale PA1, 4-8-4 and other locomotives with DCC 8 pin socket. Available with an eight pin plug in. Four function outputs. 1 Amp rating, 1.25 Amp peak. Measures 1.15" x 0...

NCE N14K1 DCC Decoder - N Drop-in Board for Post-2006 Kato SD40-2   Drop in decoder for Kato N scale INCLUDES pre-soldered motor clips   Fits: Athearn EMD F45 Athearn EMD FP45 Kato "Gevo" ES44AC Kato AC4400 Kato C30-7 Kato GE C44-9W Kato...

NCE N14K2 DCC Decoder - N Drop-in Board for Kato SD80/90MAC Series, RSC2, RS2   Drop in decoder for Kato N scale INCLUDES pre-soldered motor clips   Fits: Kato RS2 Kato RSC2 Kato SD80 Kato SD80MAC Kato SD90/43MAC Life Like RS2 Walthers...

NCE N14SR DCC Decoder - Hardwire      NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Programmable Start, Mid and Maximum speed works for all speed modes Motor rating 1 Amp...

NCE N14SRP DCC Decoder - NEM652 8-pin Wired Plug    NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Programmable Start, Mid and Maximum speed works for all speed modes Motor rating 1 Amp...

NCE NAVO DCC Decoder - N Drop-in Board for Atlas VO-1000   Made to fit the Atlas N scale VO1000 loco with two functions.   NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Programmable...

NCE Next18 DCC Decoder - NEM662 Next18 Integral Connector     Direct plug in to locos equipped with Next18 (NEM-662) socket   Features of this decoder: Silent Running ,torque compensated motor drive Torque Compensation for ultra smooth...

NCE NH15/16-44 DCC Decoder - N Drop-in Board for Atlas H15/16-44   Plug and Play decoder for the N-Scale Atlas H15-44 and H16-44. 1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed.   NCE Decoders offer the following...

NCE P2K-SR DCC Decoder HO Life-Like Proto 2000 Drop-In This decoder is designed specifically to fit LifeLike HO Scale 0-8-0, GP7, GP9, GP30, GP38-2 and SD60 locomotives. NCE Decoders offer the following features:...

NCE Small "No-Halt" DCC Decoder Stay-Alive Device - HardwireThe small no halt will allow a typical HO locomotive to travel up to 3 feet of dirty track and still operate the lights with NO FLICKER. Do not exceed DCC track voltage of 15v...

NCE SW9-SR DCC Decoder HO Life-Like SW8-9-900-1200 Drop-In   This decoder is designed for easy installation in Lifelike Proto 2000 SW8/SW9/SW1200 Locomotives. NCE Decoders offer the following features: Torque Compensation for ultra smooth low...

SBS4DCC - 10pc ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set     The set contains 10 Grabber type test clips molded from glass reinforced plastic in 10 colors.   Colors include Red, Black, Orange, Gray, White, Yellow,...

SBS4DCC - 1pc Black ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set       This is 1pc extra clip to make a full set for decoders with two black wires.     The set contains 10 Grabber type test clips molded...

SBS4DCC - 1pc Brown ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set       This is 1pc extra clip to make a full set for decoders with two brown wires.     The set contains 10 Grabber type test clips molded...

SBS4DCC - 1pc Red ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set       This is 1pc extra clip to make a full set for decoders with two red wires.     The set contains 10 Grabber type test clips molded from...

SBS4DCC - 1pc Violet ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set       This is 1pc extra clip to make a full set for decoders with two violet wires.     The set contains 10 Grabber type test clips...

SBS4DCC - 8pc ESU 53900 LokTester - Zimo MXTAPS Decoder Tester Test Clip Set     The set contains 8 Grabber type test clips molded from plastic in 8 colors.   Colors include Red, Black, White, Yellow, Blue, Green, Brown and Purple, a...