NCE DCC

The item was opened and then returned by customer after determining they purchased the wrong product.  In original opened packaging...

NCE DCC P1024 Power Supply 10A 24V for PB110, PH10, PH10-R The P1024 is a 24 Volt DC, 220-watt power supply with a US power cord. The power supply is suitable for use with the following NCE...

NCE DCC P519 Power Supply 5A 19V for PH5 - PB5a The P519 is a 19 Volt DC, 4.74 amps, 90 Watt with US power cord. Power supply suitable for use with the following NCE products: PH5 (5 Amp system) and...

NCE DCC Straight-RJ9-7 Straight Control Bus Booster Cable7ft control bus booster cable. The NCE standard cable used to connect the two sides of a PH-Pro system box. Can also be used to connect...

NCE DCC Straight-RJ9-15 Straight Control Bus Booster Cable15ft control bus booster cable. The NCE standard cable used to connect the two sides of a PH-Pro system box. Can also be used to connect...

NCE DCC Straight-RJ9-25 Straight Control Bus Booster Cable25ft control bus booster cable. The NCE standard cable used to connect the two sides of a PH-Pro system box. Can also be used to connect...

NCE DCC Toggle Switch, DPDT - On-Off-On Momentary (3 pk)   5 pack On/Off/On DPDT Center Off Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole  

NCE DCC Toggle Switch, DPDT - On-Off-On (5 pk)   5 pack On/Off/On DPDT Center Off Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole  

New package but I can see 1x broken glass tube so it is only a 5 pack.  Otherwise new in the original package. >>>>>>>>>>>>>>>>> NCE DCC CP6...

NCE DCC Cab06 DCC Handheld Throttle Replacement Keypad Membrane   Replacement Part Only  

NCE DCC Pro Cab DCC Handheld Throttle Replacement Keypad Membrane   Replacement Part Only  

NCE DCC 6 Pin Wiring Harness Set (4 pk)   4 pack of 6 pin wiring harness sets

NCE DCC 5 Pin Wiring Harness Set (5 pk)   5 pack of 5 pin wiring harness sets

NCE DCC 4 Pin Wiring Harness Set (6 pk)   6 pack of 4 pin wiring harness sets  

NCE DCC 3 Pin Wiring Harness Set (8 pk)   8 pack of 3 pin wiring harness sets  

NCE DCC 2 Pin Wiring Harness Set (12 pk)   12 pack of 2 pin wiring harness sets

NCE DCC 0.3 F 2.7V Super Capacitor (6 pk)6 pack of .3 farad (300,000 microfarad) 2.7v super capacitors Lead Spacing - 0.059" (1.50mm) Size / Dimension - 0.157" Dia (4.00mm) Height - Seated...

NCE DCC Track Power Bus Snubber / RC Filter (2 pk)    Use with any DCC system to prevent large voltage spikes.  Reduces or eliminates voltage spikes on long runs of DCC bus...

NCE DCC Toggle Switch, DPDT - On-On (5 pk)   5 pack On/On DPDT Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole   

NCE DCC Toggle Switch, SPST - On-On (6 pk)   6 pack On/On SPST Toggle Switch 5a /125v 1/4 (6.35mm) mounting hole   

NCE DCC Push Button Switch, SPST - N.O. Momentary - Green (8 pk)   8 pack N.O. Momentary SPST Pushbutton Green 1/4 (6.35mm) mounting hole.  

NCE DCC Push Button Switch, SPST - N.O. Momentary - Red (8 pk)   8 pack N.O. Momentary SPST Pushbutton Red 1/4 (6.35mm) mounting hole.  

NCE DCC Push Button Switch, SPST - N.O. Momentary - Black (8 pk)   8 pack N.O. Momentary SPST Pushbutton Black 1/4 (6.35mm) mounting hole.  

NCE DCC Layout Wiring - Euro12-2 12 Circuit Eurostyle Terminal Strip (2 pk)   12 circuit Eurostyle Term strip, Package of 2, 14-24 AWG.  

NCE DCC Layout Wiring - Euro8-2 8 Circuit Eurostyle Terminal Strip (2 pk)   8 circuit Eurostyle Term strip, Package of 2, 14-24 AWG.  

NCE DCC Layout Wiring - Euro6-3 6 Circuit Eurostyle Terminal Strip (3 pk)   6 circuit Eurostyle Term strip, Package of 3, 14-24 AWG.  

NCE DCC Layout Wiring - Euro4-4 4 Circuit Eurostyle Terminal Strip (4 pk)   4 circuit Eurostyle Term strip, Package of 4, 14-24 AWG.  

NCE DCC Layout Wiring - Euro3-5 3 Circuit Eurostyle Terminal Strip (5 pk)   3 circuit Eurostyle Term strip, Package of 5, 14-24 AWG.  

NCE DCC Layout Wiring - Euro2-5 2 Circuit Eurostyle Terminal Strip (5 pk)   2 circuit Eurostyle Term strip, Package of 5, 14-24 AWG.  

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 12 Pair   24 Anderson power poles, 12 red, 12 black, 12-16 AWG.  

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 4 Pair   8 Anderson power poles, 4 red, 4 black, 12-16 AWG.  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (10 pk)   Power Drop Wires, Red, package of 10, 22 AWG  

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (20 pk)   Male Quick Connect, (Red), package of 20, 18-22AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (20 pk)   Track Bus Taps, (Blue), package of 20, 14-16AWG  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (25 ft)   DCC Main Bus Wire, (Red), 14 AWG, 25 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (25 ft)   DCC Main Bus Wire, (Black), 14 AWG, 25 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (100 ft)   DCC Main Bus Wire, (Red), 14 AWG, 100 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (100 ft)   DCC Main Bus Wire, (Black), 14 AWG, 100 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (50 ft)   DCC Main Bus Wire, (Red), 14 AWG, 50 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (50 ft)   DCC Main Bus Wire, (Black), 14 AWG, 50 Feet  

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (64 pk)   Male Quick Connect, (Red), package of 64, 18-22AWG  

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (32 pk)   Male Quick Connect, (Red), package of 32, 18-22AWG  

NCE DCC Layout Wiring - Track Bus Taps - 10-12 AWG (Yellow) (32 pk)   Track Bus Taps, (Yellow), package of 32, 10-12AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (64 pk)   Track Bus Taps, (Blue), package of 64, 14-16AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (32 pk)   Track Bus Taps, (Blue), package of 32, 14-16AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (32 pk)   Power Drop Wires, Red, package of 32, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (32 pk)   Power Drop Wires, Black, package of 32, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (16 pk)   Power Drop Wires, Red, package of 16, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (16 pk)   Power Drop Wires, Black, package of 16, 22 AWG  

NCE DCC Layout Wiring Kit - 100ft DCC Power Bus Layout Wiring Kit, 100 Foot DCC power bus. DCC main bus wiring for typical 100 foot double track mainline. Includes: Main Bus - 100 feet each red and...

NCE DCC Layout Wiring Kit - 50ft DCC Power Bus Layout Wiring Kit, 50 Foot DCC power bus. DCC main bus wiring for typical 50 foot double track mainline. Includes: Main Bus - 50 feet each red and...

NCE DCC Layout Wiring Kit - 25ft DCC Power BusLayout Wiring Kit, 25 Foot DCC power bus. DCC main bus wiring for typical 25 foot double track mainline. Includes: Main Bus - 25 feet each red and black...

NCE DCC Heatshrink Tubing Pack - 3/64", 1/16", 3/32"   Assorted heatshrink tubing, 10 feet.  

NCE DCC WWLEDx20 3mm Warm White LED (20 pk)   Warm white LED, 3mm, qty 20.  

NCE DCC Locomotive Installation LED Lighting Kit   LED lighting, 20 LEDs, LED Tester, 50 feet ultra flex #32 wire, 40 resistors, 3 sizes heatshrink.  

NCE DCC Locomotive Decoder Installation Wiring KitLoco Wiring Kit for N/HO, 8 wire colors (80 feet ultra flex 30/32 AWG wire) , 3 sizes heatshrink.  

NCE DCC P314 Power Supply 13.8V 3A for DCC TwinP314 13.8v DC 3 Amp Power Supply for DCC Twin. Do not purchase this for use with the Power Cab. Don't forget to use a REAL surge protector not a power...

NCE DCC P514 Power Supply 12V - 13.8V 5A for DB5 - PB5 - SB512/13.8 Volt DC, 5 Amp internationally approved power supply. This is a replacement power supply for the SB5 Smartbooster. Do not purchase...

NCE DCC Dual Relay Board - High power Isolated Output For Switch8-Mk2   Dual relay board for isolated output of Switch8 or Switch-It.   2 Amp Relay for Connection to Switch-It or Switch 8...

NCE DCC 6-wire to  8-wire Cab Bus Adapter Cable8-wire adapter, converts 6 wire cab bus signals to 8 wire cab bus signals.  

NCE DCC UTP-CAT5 Cab Bus Facia Panel     Same six-wire connectors in front as standard UTP but allows use of off-the-shelf CAT5 cables to connect panel-to-panel at rear. Can be used as a...

NCE DCC AR10 Auto Reverser with Circuit BreakerThe AR10 is an automatic reverse loop controller for DCC layouts. In addition it functions as a circuit breaker for the reverse loop. Very simple...

NCE DCC Mini Panel Automation ControllerUse one button to control multiple switches or macros on your NCE DCC system. You can have up to 30 pushbuttons, toggle switches, block detectors, etc. Can be...

NCE DCC CP6 Replacement Lamps - 1APack of 6 replacement lamps for the CP6 circuit protector. 1 Amp  

NCE DCC CP6 Circuit Protection - 6 BlockBasic Circuit Protector. You can connect up to Six Outputs with 1 amp of protection per output. Light bulbs protect locomotivr and commadn station from damage...

NCE DCC Power Cab Auto-SW Program Track SwitchAuto SW: Adds a program track output to the Power Cab. Prevents accidental programming of locos on your mainline track when using Program Track mode...

NCE DCC EB1 v1.1 Electronic Circuit BreakerProvides short circuit protection for one power district. Can be used with most DCC systems. Default trip time is 30 times faster compared to the basic...

NCE DCC USB Interface PC Connection PanelComputer Interface for Power Cab. Requires the NCE Power Cab, a USB cable, and a computer with one free USB port. Plug and play with Windows 10: No driver...

NCE DCC Power Cab PCP Cab Bus Facia Connection PanelPower Cab connection panel has jacks on rear for track output and power input from the P114 power supply. The Power Cab plugs in on the front in...

NCE DCC P114 Power Supply 24W 13.8V for Power Cab P114 13.8v 24 watt DC Power Supply. US approved power supply suitable for Power Cab and other applications. Replacement power supply for the Power...

NCE DCC Straight-RJ12-40 Straight Cab Bus CableRJ12-40, 6 wire straight cab bus cable, 40 feet long. Not approved for use with the Power Cab. 26awg wires For use with the Pro Cab, and other NCE...

NCE DCC P515 Power Supply 5A 15V for DB5 - PB5 - SB5     P515 15 Volt AC, 5 Amp Linear Power Supply suitable for PH-Pro, PB105, Digitrax, etc. Approved for US use only. This is a...

NCE DCC Straight-RJ12-12 Straight Throttle Cable RJ12-12, 6 Wire straight cab bus cable, 12 ft long. Not approved for use with the Power Cab. For use with the Pro Cab and other NCE Throttles. Also...

NCE DCC Straight-RJ12-7 Straight Throttle Cable RJ12-7 6 Wire straight cab bus cable.   For use with the Power Cab, and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus...

NCE DCC NMRA 8-pin (NEM652) Plug PackTen pack of the NMRA eight-pin connectors used in many "DCC Ready" locomotives and accessories.  

NCE DCC Coilcord-DIN 7 foot coiled cord with molded right angle DIN plug        

NCE DCC Coilcord-RJ 7' Coiled Throttle Cable A 7 foot four wire coiled cable for cabs. Has RJ12 connectors on both ends. This cable does not provide track power. Important Note! You cannot use this...

NCE DCC UTP Cab Bus Facia PanelThis is our lowest cost, easiest to use, cab bus panel. All four RJ-12 jacks are wired in parallel for easy plug and play use. This board also provides a convenient...

NCE DCC BD20 Block Dectector UnitDetects DCC track current being drawn through a single track feeder. Isolated so there is no direct electrical connection to the track. Needs no external power for...

NCE DCC AIU01 Auxiliary Input UnitThe Auxiliary Input Unit (AIU) provides a means of connecting external devices such as switch contacts, Block Detectors (BD20), or other sensors to the NCE Cab Bus...

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator...

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator...

NCE DCC Light-It Function-Only Lighting And Signal DCC Decoder - Hardwire   The Light-It is a multi-purpose programmable DCC lighting decoder.  One Light-It contains three programmable...

NCE DCC Light-It Function-Only Lighting And Signal DCC Decoder - Hardwire   The Light-It is a multi-purpose programmable DCC lighting decoder.  One Light-It contains three programmable...

NCE DCC Light-It Function-Only Lighting And Signal DCC Decoder - Hardwire   The Light-It is a multi-purpose programmable DCC lighting decoder.  One Light-It contains three programmable...

NCE DCC "SwitchIt-Mk2" Stall Motor Stationary Switch DecoderFOR STALL MOTOR MACHINES ONLY, NOT FOR USE WITH TWIN COIL SWITCH MACHINES  All new easy programming! Control for 2 Tortoise switch...

NCE DCC "Q-Snap" Quad Twin Coil Stationary Switch Decoder FOR TWIN COIL SWITCH MACHINES ONLY   All new easy programming! Control for 4 twin coil solenoid type switch machines (Atlas, Peco,...

NCE DCC Button-Board - Local Push Button Add-On For Switch8-Mk2Add up to 16 push buttons to Switch8-Mk2 - Accomodate N.O. Pushbuttons or toggle switches - Simple hook up, 3 wires to Switch8-Mk2...

NCE DCC "Switch8-Mk2" Stall Motor Stationary Switch DecoderEasy programming with no jumpers. On board LED display. Control for 8 Tortoise switch machines. Remembers the position of switch during...

NCE DCC "Switch-Kat" Kato Unitrack Stationary Switch DecoderYour Kato Unitrack and LGB remote control turnouts can now be DCC controlled. The Switch-Kat provides connections for optional switch...

NCE DCC "Snap It" Twin Coil Stationary Switch DecoderControl one twin coil switch machine. Has capacitive discharge for low current draw of track power. Provides connections for two "local control"...

NCE DCC PB5 Booster 5A DCC w/ P514 Power SupplyContinuous 5 Amp booster that can be added to your existing DCC system. Includes P514 12v/13.8v DC International Power Supply with US power cord Don't...

NCE Cab 06p DCC Handheld Throttle Yard Engineer cab with LED display uses a more conventional potentiometer knob for speed control—definite stop and starting points. Note** The current speed...

NCE Cab 06e DCC Handheld Throttle Yard Engineer cab with LED display uses a more conventional potentiometer knob for speed control. Definite stop and starting points. Note** the speed setting of the...

NCE Cab 06r DCC Handheld ThrottleBasic Engineer cab with LED locomotive address display. It uses a digital encoder, allowing flexibility when controlling multiple locomotives at different speeds...

NCE Cab 06e DCC Handheld Throttle Engineer cab with LED locomotive address display, uses a digital encoder which allows flexibility when controlling multiple locomotives at different speeds. Clear,...

NCE DB5 Add-On Booster for SB5 5A DCC w/ P514 Power SupplyThis is a true 5 Amp booster compatible with all NCE and most other DCC systems. Includes an internationally approved 13.8v/12v 5 Amp Power...

NCE SB5 Smart Booster 5A DCC w/ P514 Power SupplyAdd an SB5 Smart Booster (command station / power booster) to your Power Cab when you need more locomotive capacity (track power). The SB5 can supply...

NCE DCC Power Cab DCC Command StationAn entire DCC system in the palm of your hand. This 2 Amp system can operate up to 4 HO locomotives or 8 N scale locomotives running at the same time. Provides...

NCE DCC RB02 Radio Base Station - 916.50MHz Version 2.1Second-generation two-way wireless for DCC. Will handle up to 48 wireless cabs. All features of your cabs are available without plugging in!...