Parts & Supplies

1/2oz Soft Adhesive Tungsten Putty   The package includes (1) 1/2 ounce package of tungsten putty weight for use in your model projects. The weights have been selected for use with Streamlined Backshop Services DCC decoder installations and Sound...

3oz Brick Weights - 1/4oz Bricks Self-Stick Adhesive-Backed   The set includes (12) 1/4 ounce self-stick weights (3 ounces total weight) for use in your model projects. The weights have been selected for use with Streamlined Backshop Services...

Bowser N Scale Premium Foam Train Service Cradle   4"w x 7 3/4" long  

DCC Specialties RRampMeter DCC Amp/Volt Meter Ver.1RRampMeter is now marketed by DCC Specialties! The only inexpensive device that accurately measures DCC Volts/Amps. Also measures AC and DC Volts/Amps. Costs less than DVMs that cannot measure DCC. Ver...

DCC Specialties RRampMeter DCC Amp/Volt Meter Ver.2RRampMeter is now marketed by DCC Specialties! The only inexpensive device that accurately measures DCC Volts/Amps. Also measures AC and DC Volts/Amps. Costs less than DVMs that cannot measure DCC. Ver...

DCC Specialties RRampMeter DCC Amp/Volt Meter Ver.3RRampMeter is now marketed by DCC Specialties! The only inexpensive device that accurately measures DCC Volts/Amps. Also measures AC and DC Volts/Amps. Costs less than DVMs that cannot measure DCC. Ver...

DCC Specialties RRampMeter DCC Amp/Volt Meter Ver.4RRampMeter is now marketed by DCC Specialties! The only inexpensive device that accurately measures DCC Volts/Amps. Also measures AC and DC Volts/Amps. Costs less than DVMs that cannot measure DCC. Ver...

Digitrax 32 Gauge Decoder Wire - 9 Color Multi-Pack (10ft each) Decoder Wire for decoder, lighting & signal installation 90ft 32AWG stranded wire-10 ft lengths in 9 colors. Red Black Orange Gray Blue White Yellow Green Violet Fits many HO, O and G...

Digitrax Booster Terminal Plug (Black)   Black Color Matches Original Plugs Shipped with DB220 Boosters Replacement for lost or damaged booster terminal connectors Specifically for DB220, compatible with all Digitrax Boosters/Command Stations

Digitrax Booster Terminal Plug (Gray)   Gray Replacement Terminal Plug for lost or damaged plugs on Digitrax Command Stations and Boosters This item is a replacement part that can be ordered through your dealer. Digitrax does not repair this item or...

Digitrax DCC DSXSV9 9G Turnout Motion Control Servo for DS78V   The DSXSV9 9G Turnout or Motion Control Servo comes with mounting bracket and installation hardware.  It is simple to install, wire and plug in, and begin using to control...

Digitrax LT1 Tester for Decoders & LocoNet Cables   It consists of a harness with 6 conductor Telco type wire with a male plug, a tester with a female 6 conductor jack, and a 100 Ohm 2 watt protection resistor. LT1 Features: Use as a...

Digitrax LT5 Tester Module (2pk) for BDL16 Series Boards, BD4N, and other products   2 LT5 Tester Modules For use with BDL16 Series Boards, BD4N, and other products  

Digitrax LT5C Tester Module (2pk) for BDL716, BDL16 Series Boards, BD4N, and other products   2 LT5C Tester Modules For use with BDL716, BDL16 Series Boards, BD4N, and other products  

Digitrax PR4 USB to LocoNet Interface with SoundFX Decoder Programmer The PR4 makes decoder programming and interfacing your layout and computer easier than ever. The PR4 seamlessly switches between computer interface and decoder programming modes...

Digitrax PS2012E 20A 13.8-23VDC DCC Power Supply   This power supply replaces the PS2012 to meet new efficiency requirements for DC power supplies. It delivers more power with less heat for more efficient operation. The 20 amp PS2012E regulated...

Digitrax PS615 AC/DC Adapter 90W 6A 15VDC Power Supply   PS615 90W AC/DC 15VDC 6 amp power supply for use with all Digitrax Command Stations and Boosters operating at 5 amps. High-efficiency power supply 15 VDC output Accepts...

Digitrax PTBK Pluggable Terminal Block Kit   Pluggable Terminal Blocks Replacement for lost or damaged Pluggable Terminal Blocks For use with products using Pluggable Terminal Blocks Includes: (1) 2 pin 3.5 mm Pluggable Terminal Block (1) 3 pin 3...

Digitrax Replacement BP600MH Ni-MH 600mAH 3.6v Battery Pack For DT602 & UT6   Nickel-Metal Hydride 600mAH 3.6v Rechargeable Battery Pack. Compatible with Digitrax throttles with 3-pin battery plug. Chargeable when inside Digitrax throttles, no...

Digitrax T1W 3mm Warm White T1 LEDs (10/pk)   10 Pack Warm White T1 LEDs   Make your locomotive lights sparkle!  Use these beautiful warm white LEDs to replace the harsh blue white LEDs that are sometimes shipped with locomotives...

ESU - NCE Replacement Green Terminal Block 4 Position 3.81mm     It is the perfect replacement for the factory plug if your original has gotten lost or broken.   The terminal block is suitable for use with the NCE Power House line...

ESU 41010 Premium Foam Train Service Tray   NEW! #41010 Premium Foam Train Service Tray, 13 x 6.5 x 2.5 inches. With magnetic storage recess. The ESU Premium Foam Train Service Tray is the ideal tool for the maintenance and care of your locomotives...

ESU 50119 EcoS/CabControl Power Supply 15V-21V 7A 150VA      The newly developed and very powerful power pack 50119 is intended as THE power pack for all ESU ECoS command stations and the ECoSBoost booster. Due to its performance data it...

ESU 50710 PowerPack for Passenger Car Lighting Kit   The new PowerPack super capacitor may be connected to our coach lighting modules 50700, 50702, 50708 and 50709 and reliably prevents any flicker in case of poor contact. Despite the fact that it...

ESU Precision Servo Motor, Model Number 51804   The Precision Servo Motor is a high-performance and noiseless actuator, introduced by ESU, suitable for the SwitchPilot decoders. It uses a highly-developed remote control (RC) technique and is...

ESU Precision Servo Motor - Metal, Model Number 51805   ESU proudly presents a further, newly-developed servo motor for all ambitious model railway fans. The „Precision Servo Motor - Metal“ is preferred by all model railroaders who look...

ESU 51806 Linear Servo Motor   This linear servo in the dimensions 26mm x 22.5mm x 10.8mm is primarily intended for installation in electric locomotives in order to subsequently make the pantographs raised and lowered. The mechanics enable very...

ESU Servo Motor Extension Cable, Model Number 51810   With the Servo Extension Cable you are able to lengthen your Precision Servo Motor by up to 75cm.   3-pole J/R plug on socket J/R / Futaba, Length: 75cm    

ESU Wire Harness, Model Number 51940 - White Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests...

ESU Wire Harness, Model Number 51941 - Purple Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests...

ESU Wire Harness, Model Number 51942 - Black   Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many...

ESU 51943 36AWG Decoder Wire - 10m - Red Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from...

ESU 51944 36AWG Decoder Wire - 10m - Orange Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from...

ESU 51945 36AWG Decoder Wire - 10m - Green Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from...

ESU 51946 36AWG Decoder Wire - 10m - Grey Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from...

ESU 51947 36AWG Decoder Wire - 10m - Yellow Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from...

ESU 51948 36AWG Decoder Wire - 10m - Brown Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from...

ESU 51949 36AWG Decoder Wire - 10m - Blue Who doesnt know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from...

ESU 51952 LokProgrammer Replacement USB Cable     As contemporary computers do not have a serial interface anymore we include a USB adapter cable. Since Windows Vista and Windows 7, cables that support USB 2.0 and are provided with a FTDI chip...

ESU 51960 Permanent Magnet s/a Marklin 220560 The 51960 magent is for armature 217450, D=24.5mm, for motor holder 216730, 211990, 228500. For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present...

ESU 51961 Permanent Magnet s/a Marklin 220450 The 51961 magent is for armature 200680, D=18.0mm, for motor holder 204900. For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present field  winding,...

ESU 51962 Permanent Magnet s/a Marklin 235690 The 51962 magent is for armature 231440, D=19.1mm, for motor holder 231350. For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present field  winding,...

ESU 51963 Miniature Relay 1A 16V With our small relay, loads are controllable whose draw exceeds the decoders function output. Put the relay between output and load.    

ESU 51965 Permanent Magnet for Marklin 3015, ET800, ST800, Gauge 1 Motors Permanent magnet for Märklin 3015, ET800, ST800, Gauge 1 motors For the retrofit of old Märklin all-current motors you need a permanent magnet. It replaces the present...

ESU 53452 LokProgrammer Set You want to listen to the sound spectrum of your favourite loco, or the special sound of that loco around the corner in the yard – on your model railroad? No problem with ESU’s LokProgrammer! One prerequisite: A...

ESU 53900 LokTester V2.1 DCC Decoder Test Station with ESU E24 Interface       ESU has introduced a new interface in 2021 with the release of the ESU 58923 LokSound 5 Nano NMRA DCC Sound Decoder - Hardwire and ESU...

ESU 53901 LokTester V2.0 DCC Decoder Test Station Extension     Perhaps you are familiar with this scenario: there is a digital decoder sitting on your workbench and you want to test it prior to a perhaps complex installation. But how...

ESU 53910 36AWG Decoder Wire - 10m - Pink Who doesn't know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests from...

ESU 53911 36AWG Decoder Wire - 10m - Turquoise Who doesn't know the problem: if you work on locos and decoders (e.g. run wires from loco to tender), you need thin, extremely flexible cables. These are not always easy to get. Responding to many requests...

ESU Replacement 2-pin Terminal Block for      50200 / 50210 EcoS  50310 CabControl  51900 / 53900 LokTester 53451 / 53452 LokProgrammer    

ESU Replacement 7-pin Terminal Block for EcoS 50200 ECoSniffer Port      

ESU Replacement Battery for 50113 - 50114 MCII Mobile Control II Throttle     From Mobile Control II User manual 1. Edition, November 2015   7.1. Battery The Mobile Control is powered by an integral Lithium Polymer rechargeable battery...

Gardner Bender Liquid Electrical Tape - Black This is hands down my favorite product I keep on my work bench.  I apply it to my work area with a tooth pick or even scrap or resistor wire lead.   I use it for everything... adhesive to seal...

GoodDealsDCC Connector Lead with Aligator Clips for The Programmer Test Track   2' long connector lead with alligator clips on one end and ring connectors on the other end   This product drop ships from the manufacturer and cannot be...

GoodDealsDCC Connector Lead for The Programmer Test Track   2' long connector lead with ring and spade connectors on ends   This product drop ships from the manufacturer and cannot be combined with any other item or order.  The is...

GoodDealsDCC Connector Lead for The Programmer Test Track   2' long connector lead with spade connectors on both ends   This product drop ships from the manufacturer and cannot be combined with any other item or order.  The is item...

GoodDealsDCC Connector Lead for The Programmer Test Track   2' long connector lead with ring connectors on both ends   This product drop ships from the manufacturer and cannot be combined with any other item or order.  The is item...

GoodDealsDCC Connector Lead for The Programmer Test Track   2' long connector lead with alligator clips on one end and soldered wire on the other ends.   This product drop ships from the manufacturer and cannot be combined with any other...

GoodDealsDCC Connector Lead for The Programmer Test Track   2' long connector lead with alligator clips on one end and spade terminals on the other ends.   This product drop ships from the manufacturer and cannot be combined with any...

Introducing The Clean-Up Clip Set for The Programmer Test Track   Test Track add-on kit for cleaning wheels on rolling stock. Use standard paper towels and Isopropyl Alcohol. This is how we always clean wheels but with a holder that leaves your...

Introducing The Clean-Up Clip Set for The Programmer Test Track   Test Track add-on kit for cleaning wheels on rolling stock. Use standard paper towels and Isopropyl Alcohol. This is how we always clean wheels but with a holder that leaves your...

GoodDealsDCC STR-1 36" Stick-on Tape Ruler for The Programmer Test Track 36" Mylar Stick-on Ruler in cm and inches. Can be attached to any Test Track platform or most surfaces. Can be cut down to a shorter size, also.   This product drop ships...

GoodDealsDCC TSS-1 Track Power Selector Switch for The Programmer Test Track - DPDT This is an add on switch that fits all current model Test Tracks. Converts the power input using a Double Pole Double Throw switch to select from 2 different power...

Kapton Tape   Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100 deg. F to 500 deg. F (-73 deg. C to 260 deg. C).   It is perfect for...

Kapton Tape   Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100 deg. F to 500 deg. F (-73 deg. C to 260 deg. C).   It is perfect for...

Kapton Tape   Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100 deg. F to 500 deg. F (-73 deg. C to 260 deg. C).   It is perfect for...

Kapton Tape   Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100 deg. F to 500 deg. F (-73 deg. C to 260 deg. C).   It is perfect for...

Kapton Tape   Polyimide Film Tape consists of Kapton® polyimide film and silicon adhesive. It is designed for high temperature applications. Temperature use range is -100 deg. F to 500 deg. F (-73 deg. C to 260 deg. C).   It is perfect for...

#0430-1001 - Labelle Complete Lubricant Sets (HO" / "O" / "S" / Lionel/ and LGB )     Kit with one each 102,106 and 107 for "HO" / "O" / "S" / Lionel/ and LGB (Garden Railway) Size trains   Also good to use for Larger Radio Control Cars...

#0430-1002 - Labelle Complete Lubricant Sets ("HO" / "N" / "Z" )     Kit with one each 102,106 and 108 for HO N and Z Scale Model Trains .   Also good to use on Smaller RC models,Bicyles,fishing reels etc.   See specific applications...

#0430-102 Gear Oil     LaBelle #102 is an extremely versatite gear lubricant and has an unlimited number of heavy duty uses for home, office, or labratory, such as -- --Model Trains: Exposed Gear Boxes (all scales) --RC Models. Exposed gear...

#105 DCC Track Conditioner  (Works Great on DC Analog Layouts also!)Using DCC controls on your layout really enhances the operation of your trains, but there is still one weak point in the system, and that is the locomotive still has to pick up not...

#430-106 Grease W/ PTFE* additive mixed in   Just a "dab" will work wonders, put a "dab" on the exposed gear box and run a minute or so, then add another "dab" and it will work its way throughout the gear box and worm gear. --Model Trains:...

#0430-107 Multi-Purpose Oil (Medium Weight)   LaBelle #107 is an Extremely versatite lubricating oil and has an unlimited number of light duty uses for home, office, or labratory, such as: --For HO, S, O, Lionel and Garden size scale model...

#0430-108 - Lite Weight Oil     Labelle fine oil for "Z" / "N" / and small "HO" locos LaBelle #108 is an Extremely versatite lubricating oil and has an unlimited number of light duty uses for home, office, or labratory, such as -- --For...

#0430-112 - Coupler Lubricant with PTFE** for "HO", "N" and "Z" scales     --Ideal for keeping your operating knuckle couplers in good working order. --Ideal for track switch motors, switch mechanisms, and switch point throw arms. **PTFE...

#0430-112 - Coupler Lubricant with PTFE** for "S", "O" and Larger Scales (also for Outdoor Railways)   --Ideal for keeping your operating knuckle couplers in good working order. --Ideal for track switch motors, switch mechanisms, and switch point...

#115 Replacement Pads for #105 DCC Track Cleaner     Same pads that are included in the #105 Kit     #105 DCC Track Conditioner:            (Works Great on DC Analog Layouts...

#0430-134 Micro Powdered PTFE* Dry Lubricant     Clean, white, non-staining. micro-powered PTFE* --For any area needing lubrication where a non-staining high performance lubricating powder is your best choice. --Electric...

#0430-901 - Labelle Motor Cleaning System (For all Scales)   Most model train layouts are in a location that is subject to gathering dust, pet hair,and other debris that can cause poor operation of your locomotives. A complete cleaning once is a...

Model Railroad Technologies Accutrack II Train Speedometer   Note: This is a portable, stand-alone speed detection device. It works with DC or DCC layouts. It works with any DCC system since they are not connected in any way.   Introducing the...

MRC Prodigy - SPROG Replacement Green Terminal Block 4 Position 5.08mm     The terminal is suitable for use with all models of the MRC Prodigy DCC system including the Express, Advance, Advance Squared, and Wireless. It is the perfect...

NCE - ZIMO - Roco Z21 Replacement Green Terminal Block 2 Position 3.5mm The terminal is suitable for use with the NCE (Power Cab, Twin, DB5, SB5), QSI Programmer, Roco Z21, Zimo MXULF and other products. It is the perfect replacement for the...

NCE DCC 0.3 F 2.7V Super Capacitor (6 pk)6 pack of .3 farad (300,000 microfarad) 2.7v super capacitors Lead Spacing - 0.059" (1.50mm) Size / Dimension - 0.157" Dia (4.00mm) Height - Seated (Max) - 0.492" (12.50mm)  

NCE DCC 2 Pin Wiring Harness Set (12 pk)   12 pack of 2 pin wiring harness sets

NCE DCC 3 Pin Wiring Harness Set (8 pk)   8 pack of 3 pin wiring harness sets  

NCE DCC 4 Pin Wiring Harness Set (6 pk)   6 pack of 4 pin wiring harness sets  

NCE DCC 5 Pin Wiring Harness Set (5 pk)   5 pack of 5 pin wiring harness sets

NCE DCC 6 Pin Wiring Harness Set (4 pk)   4 pack of 6 pin wiring harness sets

NCE DCC Cab06 DCC Handheld Throttle Replacement Keypad Membrane   Replacement Part Only  

NCE DCC Dual Relay Board - High power Isolated Output For Switch8-Mk2   Dual relay board for isolated output of Switch8 or Switch-It.   2 Amp Relay for Connection to Switch-It or Switch 8 Accessory Decoder  

NCE DCC Heatshrink Tubing Pack - 3/64", 1/16", 3/32"   Assorted heatshrink tubing, 10 feet.  

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator contains three programmable lighting outputs with a...

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator contains three programmable lighting outputs with a...

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 12 Pair   24 Anderson power poles, 12 red, 12 black, 12-16 AWG.  

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 4 Pair   8 Anderson power poles, 4 red, 4 black, 12-16 AWG.  

NCE DCC Layout Wiring - Euro12-2 12 Circuit Eurostyle Terminal Strip (2 pk)   12 circuit Eurostyle Term strip, Package of 2, 14-24 AWG.  

NCE DCC Layout Wiring - Euro2-5 2 Circuit Eurostyle Terminal Strip (5 pk)   2 circuit Eurostyle Term strip, Package of 5, 14-24 AWG.  

NCE DCC Layout Wiring - Euro3-5 3 Circuit Eurostyle Terminal Strip (5 pk)   3 circuit Eurostyle Term strip, Package of 5, 14-24 AWG.  

NCE DCC Layout Wiring - Euro4-4 4 Circuit Eurostyle Terminal Strip (4 pk)   4 circuit Eurostyle Term strip, Package of 4, 14-24 AWG.