Parts & Supplies

#0430-1002 - Labelle Complete Lubricant Sets ("HO" / "N" / "Z" )  

#0430-102 Gear Oil     LaBelle #102 is an extremely ve

#105 DCC Track Conditioner  (Works Great on DC Analog Layouts also!)

#430-106 Grease W/ PTFE* additive mixed in   Just a "dab" will

#0430-107 Multi-Purpose Oil (Medium Weight)  

#0430-108 - Lite Weight Oil     Labelle fine oil for "Z" / "N" / and small "

#0430-112 - Coupler Lubricant with PTFE** for "HO", "N" and "Z" scales     --Ideal f

#0430-112 - Coupler Lubricant with PTFE** for "S", "O" and Larger Scales (also for Outdoor Railways)  

#115 Replacement Pads for #105 DCC Track Cleaner  

#0430-134 Micro Powdered PTFE* Dry Lubricant     Clean, white, non-staining. micro-powered PTFE*

#0430-901 - Labelle Motor Cleaning System (For all Scales)  

Model Railroad Technologies Accutrack II Train Speedometer   Note: This is a portable, stand-alone speed detection device. It works with DC or DCC layouts. It works with any DCC system since they are...

Model Train Technology HO Scale Universal Long Passenger Car Light Kit with DCC Decoder   This is an LED light board with DCC

MRC Prodigy - SPROG Replacement Green Terminal Block 4 Position 5.08mm     The terminal is suitable for use with all models of the MRC Prodigy DCC system including the Express

NCE - ZIMO - Roco Z21 Replacement Green Terminal Block 2 Position 3.5mm The terminal is suitable for use with the NCE (Power Cab, Twin, DB5, SB5), QSI Programmer, Roco Z21, Zimo MXULF

NCE DCC 0.3 F 2.7V Super Capacitor (6 pk)6 pack of .3 farad (300,000 microfarad) 2.7v super capacitors

NCE DCC 2 Pin Wiring Harness Set (12 pk)   12 pack of 2 pin wiring harness sets

NCE DCC 3 Pin Wiring Harness Set (8 pk)   8 pack of 3 pin wiring harness sets  

NCE DCC 4 Pin Wiring Harness Set (6 pk)   6 pack of 4 pin wiring harness sets  

NCE DCC 5 Pin Wiring Harness Set (5 pk)   5 pack of 5 pin wiring harness sets

NCE DCC 6 Pin Wiring Harness Set (4 pk)   4 pack of 6 pin wiring harness sets

*** PLEASE NOTE: The Brutus Power Supply is specifically excluded from the FREE SHIPPING offer because of size and weight. ***  

NCE DCC Cab06 DCC Handheld Throttle Replacement Keypad Membrane   Replacement Part Only  

NCE DCC Dual Relay Board - High power Isolated Output For Switch8-Mk2   Dual relay board for isolated output of Switch8 or Switch-It.  

NCE DCC Heatshrink Tubing Pack - 3/64", 1/16", 3/32"   Assorted heatshrink tubing, 10 feet.

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play mu

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play mu

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 12 Pair   24 Anderson power poles, 12 red, 12 black, 12-16 AWG.

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 4 Pair   8 Anderson power poles, 4 red, 4 black, 12-16 AWG.

NCE DCC Layout Wiring - Euro12-2 12 Circuit Eurostyle Terminal Strip (2 pk)   12 circuit Eurostyle Term strip, Package of 2,

NCE DCC Layout Wiring - Euro2-5 2 Circuit Eurostyle Terminal Strip (5 pk)   2 circuit Eurostyle Term strip, Package of 5, 14-

NCE DCC Layout Wiring - Euro3-5 3 Circuit Eurostyle Terminal Strip (5 pk)   3 circuit Eurostyle Term strip, Package of 5, 14-

NCE DCC Layout Wiring - Euro4-4 4 Circuit Eurostyle Terminal Strip (4 pk)   4 circuit Eurostyle Term strip, Package of 4, 14-

NCE DCC Layout Wiring - Euro6-3 6 Circuit Eurostyle Terminal Strip (3 pk)   6 circuit Eurostyle Term strip, Package of 3, 14-

NCE DCC Layout Wiring - Euro8-2 8 Circuit Eurostyle Terminal Strip (2 pk)   8 circuit Eurostyle Term strip, Package of 2, 14-

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (100 ft)   DCC Main Bus Wire, (Black), 14 AWG, 100 Feet

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (25 ft)   DCC Main Bus Wire, (Black), 14 AWG, 25 Feet

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (50 ft)   DCC Main Bus Wire, (Black), 14 AWG, 50 Feet

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (100 ft)   DCC Main Bus Wire, (Red), 14 AWG, 100 Feet

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (25 ft)   DCC Main Bus Wire, (Red), 14 AWG, 25 Feet

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (50 ft)   DCC Main Bus Wire, (Red), 14 AWG, 50 Feet

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (20 pk)   Male Quick Connect, (Red), package of 20, 18-22AW

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (32 pk)   Male Quick Connect, (Red), package of 32, 18-22AW

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (64 pk)   Male Quick Connect, (Red), package of 64, 18-22AWG

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (16 pk)   Power Drop Wires, Black, package of 16, 22 AWG

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (32 pk)   Power Drop Wires, Black, package of 32, 22 AWG

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (10 pk)   Power Drop Wires, Red, package of 10, 22 AWG

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (16 pk)   Power Drop Wires, Red, package of 16, 22 AWG

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (32 pk)   Power Drop Wires, Red, package of 32, 22 AWG &

NCE DCC Layout Wiring - Track Bus Taps - 10-12 AWG (Yellow) (32 pk)   Track Bus Taps, (Yellow), package of 32, 10-12AWG

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (20 pk)   Track Bus Taps, (Blue), package of 20, 14-16AWG

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (32 pk)   Track Bus Taps, (Blue), package of 32, 14-16AWG

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (64 pk)   Track Bus Taps, (Blue), package of 64, 14-16AWG

NCE DCC Layout Wiring Kit - 100ft DCC Power Bus Layout Wiring Kit, 100 Foot DCC power bus. DCC main bus wiring f

NCE DCC Layout Wiring Kit - 25ft DCC Power BusLayout Wiring Kit, 25 Foot DCC power bus. DCC main bus wiring for typical

NCE DCC Layout Wiring Kit - 50ft DCC Power Bus Layout Wiring Kit, 50 Foot DCC power bus. DCC main bus wiring for

NCE DCC Locomotive Decoder Installation Wiring KitLoco Wiring Kit for N/HO, 8 wire colors (80 feet ultra flex 30/32 AWG wire) , 3 sizes heatshrink.  

NCE DCC Locomotive Installation LED Lighting Kit   LED lighting, 20 LEDs, LED Tester, 50 feet ultra flex #32 wire, 40 resisto

NCE DCC NMRA 8-pin (NEM652) Plug PackTen pack of the NMRA eight-pin connectors used in many "DCC Ready" locomotives and accessories.  

NCE DCC P1024 Power Supply 10A 24V for PB110, PH10, PH10-R The P1024 is a 24 Volt DC, 220-watt power supply with a US power cord. The power supply is suitable for use with

NCE DCC P114 Power Supply 24W 13.8V for Power Cab P114 13.8v 24 watt DC Power Supply. US approved power supply

NCE DCC P314 Power Supply 13.8V 3A for DCC TwinP314 13.8v DC 3 Amp Power Supply for DCC Twin. Do not purchase t

NCE DCC P514 Power Supply 12V - 13.8V 5A for DB5 - PB5 - SB512/13.8 Volt DC, 5 Amp internationally approved power supply. This is a replacement power supply for the SB5 Smartbooster.

NCE DCC P515 Power Supply 5A 15V for DB5 - PB5 - SB5    

NCE DCC P519 Power Supply 5A 19V for PH5 - PB5a The P519 is a 19 Volt DC, 4.74 amps, 90 Watt with US power cord. Power supply suitable for use with the following NCE produ

NCE DCC USB Interface PC Connection PanelComputer Interface for Power Cab. Requires the NCE Power Cab, a USB cable, and a computer with one free USB port. Plug and play with Windows 10:

NCE DCC Pro Cab DCC Handheld Throttle Replacement Keypad Membrane   Replacement Part Only  

NCE DCC Push Button Switch, SPST - N.O. Momentary - Black (8 pk)   8 pack N.O. Momentary SPST Pushbutton Black 1/4 (6.35mm) m

NCE DCC Push Button Switch, SPST - N.O. Momentary - Green (8 pk)   8 pack N.O. Momentary SPST Pushbutton Green 1/4 (6.35mm) m

NCE DCC Push Button Switch, SPST - N.O. Momentary - Red (8 pk)   8 pack N.O. Momentary SPST Pushbutton Red 1/4 (6.35mm) mount

NCE DCC Toggle Switch, DPDT - On-Off-On (5 pk)   5 pack On/Off/On DPDT Center Off Toggle Switch 5a/125v

NCE DCC Toggle Switch, DPDT - On-Off-On Momentary (3 pk)   5 pack On/Off/On DPDT Center Off Toggle Switch 5a/125v

NCE DCC Toggle Switch, DPDT - On-On (5 pk)   5 pack On/On DPDT Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole 

NCE DCC Toggle Switch, SPST - On-On (6 pk)   6 pack On/On SPST Toggle Switch 5a /125v 1/4 (6.35mm) mounting hole 

NCE DCC Track Power Bus Snubber / RC Filter (2 pk)    Use with any DCC system to prevent large voltage spikes.&nbs

NCE DCC WWLEDx20 3mm Warm White LED (20 pk)   Warm white LED, 3mm, qty 20.  

NCE Medium "No-Halt" DCC Decoder Stay-Alive Device - Hardwire   Dimensions: 2.14" x 0.640 x 0.400" (54 x 16 x 10 mm)

NCE Small "No-Halt" DCC Decoder Stay-Alive Device - HardwireThe small no halt will allow a typical HO locomotive to travel up to 3 feet of dirty track and still operate the lights with NO FLICKER. Do...

NixTrainz Decoder Buddy 12 Output V5B 2.2k Ohm Resistor 21-HW - 21MTC Adapter Board - NEM660 21MTC Integral Connector     Decoder Buddy V5 and V

NixTrainz Decoder Buddy 8 Output Original 2.2k Ohm Resistor 21-HW - 21MTC Adapter Board - NEM660 21MTC Integral Connector     Decoder Buddy V5 a

NixTrainz Decoder Buddy Adapter Board - Test Module     Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple ad

NixTrainz Decoder Buddy Mini 1k Ohm Resistor 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector   Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed

NixTrainz Power Bridge I DCC Decoder Stay-Alive Device for LokPilot & LokSound - Hardwire The new NixTrainz Power Bridge comes with a superc

NixTrainz Power Bridge II DCC Decoder Stay-Alive Device for LokPilot & LokSound - Hardwire The new NixTrainz Power Bridge comes with a super

NixTrainz Power Bridge III Nano DCC Decoder Stay-Alive Device - Hardwire The new NixTrainz Power Bridge comes with a supercapacitor that is conn

RR-CirKits 3TK2-1 I/O Module Mounting Track - Single Position This plastic mounting track is suitable for mounting a single I/O module to a flat surface. (3 1/2" x 2")

RR-CirKits 3TK2-2 I/O Module Mounting Track - Dual Position This plastic mounting track is suitable for mounting two I/O modules to a flat surface. (3 1/2" x 4")

RR-CirKits 3TK2-2W I/O Module Mounting Track - Dual Position Wide Spacing This plastic mounting track is suitable for mounting two I/O modules to a flat surface with extra wiring space between...

RR-CirKits 3TK2-3 I/O Module Mounting Track - Thee Position This plastic mounting track is suitable for mounting three I/O modules to a flat surface. (3 1/2" x 6")

RR-CirKits 3TK2-3W I/O Module Mounting Track - Three Position Wide Spacing This plastic mounting track is suitable for mounting three I/O modules to a flat surface with extra wiring space between...

RR-CirKits 3TK2-4 I/O Module Mounting Track - Quad Position This plastic mounting track is suitable for mounting four I/O modules to a flat surface. (3 1/2" x 8")

RR-CirKits 3TK2-4W I/O Module Mounting Track - Quad Position Wide Spacing This plastic mounting track is suitable for mounting four I/O modules to a flat surface with extra wiring space between...

RR-CirKits 3TK2-6 I/O Module Mounting Track - Hex Position This plastic mounting track is suitable for mounting six I/O modules to a flat surface. (3 1/2" x 12")

RR-CirKits CAB-10x100 10 Conductor Flat Ribbon Interface Cable - 1 ft 100' rolls, #28 AWG gray with red stripe on line one. Used to connect any daughter cards to the Tower Controller, TowerMan, or...

RR-CirKits CAB-10x100 10 Conductor Flat Ribbon Interface Cable - 100 ft 100' rolls, #28 AWG gray with red stripe on line one. Used to connect any daughter cards to the Tower Controller, TowerMan, or...

RR-CirKits CAB-Servo M-F 39 Servo Extension Cable (M-F) - 39" This 39" cable may be used to extend the length of (M-M) servo cables.

RR-CirKits CAB-Servo M-M 20 Servo Connection Cable (M-M) - 20" This 20" cable may be used to connect two Quik-Link devices.

RR-CirKits CAB-Servo M-M 4 Servo Connection Cable (M-M) - 4" This 4" cable may be used to connect two Quik-Link devices.

RR-CirKits I/O Test-SM Sample Mode I/O Test Board This board contains 8 push button switches and 8 LED pairs. It is designed to quickly test the I/O ports on any of our boards such as the Tower LCC,...

RR-CirKits IDC-M10-LATCHx10 10-position IDC Male Socket w/ Latch - 10 pcs Box of 10 Insulation Displacement Connectors for use with 10 wire flat ribbon cable. Use with IDC-S10 to create extension...