Parts & Supplies

SBS4DCC 4063 "Sugar Cube" Speaker 13x18mm w/ Hyperbaric Sound Chamber  

SBS4DCC 4174 "Sugar Cube" Speaker 10x20mm w/ Side-By-Side Twin Coupled Sound Chamber for HO Athearn RTR F59PHI

SBS4DCC 4181 "Sugar Cube" Speaker 8x12mm 8 ohm .7 watt w/ N Cab Roof Sound Chamber for N Kato NW2  

SBS4DCC 470 mF 5.5V Radial Super CapacitorThis listing is for (1) 470 mF 5.5V Super Capacitor with radial leads. The capacitors have been selected for use with Streamlined Backshop Services decoder...

SBS4DCC 470 uF 25V Long Radial CapacitorThis listing is for (1) DCC Install 470 uF 25V Long Capacitor with radial leads. The capacitors have been selected for use with Streamlined Backshop Services...

SBS4DCC 470 uF 25V Radial CapacitorThis listing is for (1) DCC Install 470 uF 25V Capacitor with radial leads. The capacitors have been selected for use with Streamlined Backshop Services Sound Car...

SBS4DCC 5-pk 3mm Round Bi-Color Green - Red LED w/ ResistorsThis listing is for (5) 3mm Green - Red Bi-Color Round LED's and resistors.  

SBS4DCC 5050 SMD Warm White LED Pre-Wired 32ga Flex Wire and ResistorThis listing is for (1) SBS4DCC 5050 SMD Warm White LED Pre-Wired 32ga Flex Wire and Resistor. The LED includes a 1500 ohm...

SBS4DCC 5050 SMD Warm White LED Pre-Wired 38ga Magnet WireThis listing is for (1) 5050 Surface Mount LED pre-wired with 38ga Enalel coated magnet wire. The LED includes a 1000 ohm resistor that...

SBS4DCC 560 uF 25V Radial SMT CapacitorThis listing is for (1) DCC Install 560 uF 25V Capacitor with Surface Mount type leads.  The capacitors have been selected for use with Streamlined Backshop...

SBS4DCC Aux 3-4 Logic Level Two Function Amplifier Board Have you ever wished you could turn those logic function on your ESU or Zimo decoder into useable function outputs?

SBS4DCC Bistable (Latching) Magnetic Reed Switch (1pc)This listing is for (1) bistable or latching magnetic reed switch. The latching magnetic reed switch is used to turn locomotive lighting circuits...

SBS4DCC High Bass Speaker 18mm Round 8 ohm 1 watt   18mm Round 5.5mm Tall

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

SBS4DCC HO Scale DCC-Friendly Universal Long Passenger Car Light Kit   This listing is for (1) SBS4DCC HO Scale DCC-Friendly Universal Long Passenger Car Light Kit. The Lighting Kit is R-T-R and...

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Axle Wip

The Original SBS4DCC Wheel & Axle Wipers REINTRODUCING... The Original SBS4DCC Wheel & Ax

SBS4DCC Ring Terminal 0-80This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 0-80 screw and...

SBS4DCC Ring Terminal 0-80 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 0-80 x 1/8 screws designed for use in DCC decoder installations. The ring terminals, often called solder...

SBS4DCC Ring Terminal 00-90This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to

SBS4DCC Ring Terminal 00-90 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 00-90 x 3/16 Torx Head screws designed for use in DCC decoder installations. The ring t

SBS4DCC Ring Terminal 2-56This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a # 2-56 screw...

SBS4DCC Ring Terminal 2-56 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 2-56 x 1/8 screws designed for use in DCC decoder installations. The ring terminals, often called solder...

SBS4DCC Ring Terminal 4-40This listing is for (10) brass ring terminals designed for use in DCC decoder installations. The ring terminals, often called solder lugs, are sized to fit a 4-40 screw and...

SBS4DCC Ring Terminal 4-40 w/ ScrewsThis listing is for (10) brass ring terminals and (10) 4-40 x 1/8 screws designed for use in DCC decoder installations. The ring terminals, often called solder...

SBS4DCC Speaker 14x25mm Rectangular 8 ohm 1 watt   14x25mm Rectangular 8 

SBS4DCC Speaker Enclosure 10x18mm Obround     The speaker enclosure is designed for use wi

SBS4DCC Speaker Enclosure 13mm Round     The speaker enclosure is de

SBS4DCC 14x25mm Rectangular Speaker Enclosure     The spe

SBS4DCC Speaker Enclosure 16x35mm Rectangular     The speaker enclos

SBS4DCC Speaker Enclosure 18mm Round     The speaker enclosure

SBS4DCC Speaker Enclosure 20mm Round     The speaker enclosure is suitable for use with th

SBS4DCC Speaker Enclosure 20mm Square     The speaker enclosur

SBS4DCC Speaker Enclosure 20x35mm Rectangular     The speaker

SBS4DCC Speaker Enclosure 20x40mm Rectangular     The speaker enclosure is suitable for use with the following speaker models:

SBS4DCC Speaker Enclosure 23mm Round     The speaker enclosure is suitable for use with the foll

SBS4DCC Speaker Enclosure 23mm Square     The speaker enclosure is s

SBS4DCC Speaker Enclosure 27mm Soundtraxx 810130 Mega Bass Round     The speaker enclosure is suitable for use with the following speaker models:

SBS4DCC Speaker Enclosure 28mm Round     The speaker enclosure is suitable for use with the foll

SBS4DCC Speaker Enclosure 28mm Square     The speaker enclosur

SBS4DCC Speaker Enclosure 28mm TCS 1694 High Base Round     The speaker enclosure is suita

SBS4DCC Speaker Enclosure 30mm Round     The speaker enclosure is suitable for use with th

SBS4DCC Speaker Enclosure 32mm Round     The speaker enclosure is suitable for use with th

SBS4DCC Throttle Lanyard   Tired of dropping your $150 throttles o

SBS4DCC Ultra Bass Speaker 28x40mm Rectangular     Speaker Specifications:

SBS4DCC Ultra Bass Speaker 28x40mm Rectangular     Speaker Specifications:

SBS4DCC Ultra Bass Speaker 30x70mm Rectangular 4 ohm 2 watt     Speaker Specifications:

SBS4DCC Ultra Bass Speaker 30x70mm Rectangular Spacer Frame     The

SBS4DCC Ultra Bass Speaker 40mm Round     Speaker Specifications:

SBS4DCC Ultra Bass Speaker 40mm Round 4 ohm 5 watt     Speaker Specifications:

SBS4DCC Ultra Bass Speaker 41x71mm Rectangular     Speaker Specifications:

SBS4DCC Ultra Bass Speaker 41x71mm Rectangular     Speaker Specifications:

SBS4DCC Ultra Bass Speaker 41x71mm Rectangular Spacer Frame    

SBS4DCC Ultra Bass Speaker Enclosure 28x40mm Rectangular     The speaker enclosure is suitable for use with the following speaker models:  

Soundtraxx 810012 Two-Pin Micro Connectors   These 2-pin connectors allow locomotive wiring to be quickly disconnected for easier painting and servicing. This kit includes a 2-pin connector set, 6"

Soundtraxx 810025 T3415 2.2mm Microbulb - 6 pk     2.1mm (0.094) diameter, 1.5 Volt, 35mA microbulbs for use as bulb replacements for additional Hyperlight effects for all SoundTra

Soundtraxx 810036 Insulative Tubing     This contains 24" of 24awg insulative tubing for covering exposed component leads and wires.  

Soundtraxx 810037 Shrink Tube Kit     The Shrink Tube Assortment provides 6" each of 1/16", 3/32". 1/8" and 1/4" diameter tubing, perfect for insulating your solder connections.

Soundtraxx 810038 Exhaust Cam Set     A quick and easy way to install cams for cam-synchronized exhaust. For use with all SoundTraxx Steam Digital Sound Decoders with a cam output.

Soundtraxx 810053 Speaker     This tiny, high-output speaker is suitable for N-scale and larger models. 

SoundTraxx 810069 Replacement Tsunami Power Harness, Steam and Diesel - NMRA 9-pin JST to Hardwire     Replacement 9-wire to JST power harness for all TSU-2200 or ECO-200 Digital S

SoundTraxx 810078 Speaker 28x40mm Rectangular 8 ohm 1.0 watt   Great sound for your train if you can fit thi

SoundTraxx 810089 Speaker 15mm Round 8 ohm 0.5 watt     This tiny, high-output speaker is suitable for N-scale and larger mo

SoundTraxx 810090 Speaker 50x90mm Rectangular 8 ohm 5.0 watt     This is one of our largest speakers for use with the TSU-4400 in O-scale or larger models. Dimensions: 50 x 90 x 37.5mm(D)

SoundTraxx 810103 Speaker 20x40mm Rectangular 8 ohm 1.5 watt     This is a great speaker for man

SoundTraxx 810108 15mm Baffle Kit     This snap-together baffle kit is designed for use with our 15mm diameter speaker (P.N. 810089).    

Soundtraxx 810109 20mm Baffle Kit     This snap-together baffle kit is designed for use with our 20mm diameter speaker (P.N. 810053).  

SoundTraxx 810110 28mm Baffle Kit     This snap-together baffle kit is designed for use with our 28mm diameter speaker (P.N. 810054).  

SoundTraxx 810112 Speaker 14x25mm Rectangular 8 ohm 1.5 watt     This small speaker is perfect f

SoundTraxx 810113 Speaker 16x35mm Rectangular 8 ohm 2.0 watt     This small oval speaker is idea

SoundTraxx 810114 Speaker 30mm Round 8 ohm 1.0 watt     If you have more space, this speaker is great for larger models.

SoundTraxx 810115 Speaker 20x35mm Rectangular 8 ohm 2.0 watt     If you have more space, this sp

SoundTraxx 810118 20mm Speaker Gasket Kit (package of 4)     These double-sided adhesive gaskets take the mess out of mounting our ¾ speakers (P.N. 810053).

SoundTraxx 810119 28mm Speaker Gasket Kit (package of 4)     These double-sided adhesive gaskets take the mess out of mounting our 1 speakers (P.N. 810054).

Soundtraxx 810120 20x40mm Speaker Gasket Kit (package of 4)     These double-sided adhesive gaskets take the mess out of mounting our 20mm x 40mm (1.56" x 0.78") speakers (P.N. 810

Soundtraxx 810121 14x25mm Speaker Gasket Kit (package of 4)     These double-sided adhesive gaskets take the mess out of mounting our 14mm x 25mm (0.56" x 1") speakers (P.N. 810112

Soundtraxx 810123 NMRA-Compatible 8-Pin Connector     This set of four 8-pin connectors is designed to facilitate wiring in locomotives equipped with a DCC-ready socket.

SoundTraxx 810128 Tsunami Replacement Capacitor 220 uF 25V     The capacitor is suitable for use with most Soundtraxx, Zimo, ESU LokSound, Digitrax, and MRC sound decoders.&nb

SoundTraxx 810129 Mega Bass Speaker 23mm Square 8 ohm 2 watt   This speaker is perfect for enhancing the low bass sounds that are found in most diesel decoders. It is well worth the extra effort!

SoundTraxx 810130 Mega Bass Speaker 27mm Round 8 ohm 2 watt     This speaker is great for boosting the low frequencies in most diesel and “big” steam sounds.

SoundTraxx 810131 Mega Bass Speaker 28mm Square 8 ohm 2 watt   This is our largest Megabass speaker which provides the best low frequency bass sounds for your steam, diesel, and electric model

SoundTraxx 810132 DBX-9000 Locomotive-To-Tender Wiring Kit - NMRA 9-pin Micro JST Adapter Board to Hardwire     The DBX-9000 is a compact 9-wire connector and harness assembly for

Soundtraxx 810133 3mm LED 6-Pack, Sunny White     Sunny White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see yo

Soundtraxx 810134 3mm LED 6-Pack, Golden White     Golden White LEDs for adding or using the Hyperlight lighting effects. Can be used as LED replacements or in place of bulbs (see

Soundtraxx 810138 16mm x 35mm Speaker Gasket Kit (Pkg. 4)     These double-sided adhesive gaskets take the mess out of mounting our 16mm x 35mm (0.63" x 1.38") speakers (P.N. 81011

Soundtraxx 810139 28mm x 40mm Speaker Gasket Kit (Pkg. 4)     These double-sided adhesive gaskets take the mess out of mounting our 28mm x 40mm (1.10" x 1.58") speakers (P.N. 81007

SoundTraxx 810140 Tsunami CurrentKeeper - 2-pin Micro JST Plug     The SoundTraxx CurrentKeep

Soundtraxx 810141 Magnetic IC Wand for Tsunami SoundCar Digital Sound Decoder and Magnetic Reed Switches    

SoundTraxx 810142 Ultra-Flexible 30 Gauge Wire - 10ft Black    

SoundTraxx 810143 Ultra-Flexible 30 Gauge Wire - 10ft Orange    

SoundTraxx 810144 Ultra-Flexible 30 Gauge Wire - 10ft Purple    

SoundTraxx 810145 Ultra-Flexible 30 Gauge Wire - 10ft Gray