Bulk Order

TCS 1006 M1 DCC Decoder - Hardwire     The M1 is a small form factor hard-wire decoder with 2 lighting functions for HO-scale and N-scale installations. This decoder is designed for installations where space is limited. This decoder is also...

TCS 1011 M4 DCC Decoder - Hardwire     The M4 is a small form factor hard-wire decoder with 4 lighting functions for HO and N scale installations. This decoder is designed for installations where space is limited. This decoder is also...

TCS 1024 T4X DCC Decoder - NMRA 9-pin JST to Hardwire   The T4X has added Blue and Black/White wires to use a KeepAlive device. This model now includes a 2-pin JST Plug for the KA-P Family of KeepAlive® devices. This decoder may...

TCS Decoders offer the following features: NMRA DCC CompliantDC or DCC Operation, 2 or 4 Digit Addressing, 14-28-128 Speed Steps, and ConsistingTCS Exclusive Auto-Adjusting BEMFQuiet Drive for super quiet engine performanceThree-step...

TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire     Never wire another resistor for 1.5v bulbs! The VR1.5 can be used with any decoder to supply a 1.5V regulated supply for all of your light bulbs.   To use the VR1.5, connect the...

TCS 1033 Wire Harness - T-WH - NMRA 9-pin JST to Hardwire     9-Pin JST for use with decoders that use a 9-Pin JST interface. Use this harness to connect any decoder with a 9-Pin JST connector to your locomotive. Examples of decoders with this...

TCS 1034 Wire Harness - MC-WH - 7-pin Micro JST to Hardwire     The MC-WH is a 7 pin JST connector designed for use with TCS MC-series decoders. The connector has 6" (15.24cm) long 32 AWG wires.    

TCS 1296 Z2 DCC Decoder - Hardwire     This full featured 2 function BEMF decoder is designed specifically to meet the needs of Z and N-Scale modelers who are converting their Z and N-Scale locomotives to DCC. Included is our auto-adjusting...

TCS Decoders offer the following features: NMRA DCC Compliant DC or DCC Operation, 2 or 4 Digit Addressing, 14-28-128 Speed Steps, and Consisting TCS Exclusive Auto-Adjusting BEMF Quiet Drive for super quiet engine...

TCS Decoders offer the following features: NMRA DCC CompliantDC or DCC Operation, 2 or 4 Digit Addressing, 14-28-128 Speed Steps, and ConsistingTCS Exclusive Auto-Adjusting BEMFQuiet Drive for super quiet engine performanceThree-step...

TCS 1415 K4-LK Function-Only DCC Decoder - Hardwire Lighting Expansion Board for TCS 1414 K4D6 DCC Decoder - Kato MP36PH Metra     The K4-LK is a function-only lighting expansion board which has been designed to be installed into the KATO...

TCS KAC Decoders offer the following features:  Attached is a harness terminating in a 2-Pin Quick Connector for use with a TCS Keep Alive.  TCS Decoders offer the following features: NMRA DCC CompliantDC or DCC Operation, 2 or 4...

TCS KA Decoders offer the following features:   Attached is an extra Blue wire and the Black w/ White Stripe wire for use with a TCS Keep Alive.   TCS Decoders offer the following features: NMRA DCC Compliant DC or DCC Operation, 2...

TCS KA Decoders offer the following features:   Attached is an extra Blue wire and the Black w/ White Stripe wire for use with a TCS Keep Alive.  TCS Decoders offer the following features: NMRA DCC CompliantDC or DCC Operation, 2 or 4...

TCS KAC Decoders offer the following features:  Attached is a harness terminating in a 2-Pin Quick Connector for use with a TCS Keep Alive.   TCS Decoders offer the following features: NMRA DCC CompliantDC or DCC Operation, 2 or...

TCS 1465 KAT24 DCC Decoder - NMRA 9-pin JST to Hardwire     This decoder is a T4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.)...