REQUEST A QUOTE  -  STREAMLINED BACKSHOP INSTALLATIONS AND REPAIRS  -  MORE INFO 
TCS - Train Control Systems

TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire

(No reviews yet) Write a Review
UPC:
879508000788
MPN:
1032
Condition:
New

Save More With Volume Discountsā€¦

Buy 5 - 9 $15.84 each
Buy 10 or above $15.35 each
  • TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire
  • TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire
MSRP: $17.95
Price: $16.16
ā€” You save $1.79

Description

TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire
 
 
Never wire another resistor for 1.5v bulbs! The VR1.5 can be used with any decoder to supply a 1.5V regulated supply for all of your light bulbs.
 
To use the VR1.5, connect the Blue wire to the 12V power supply from your decoder (BLUE), and connect the Black & White wire to the Ground on the decoder (can be the same color wire, or on the board itself).
 
The Tan wire from the regulator supplies the 1.5V common source for all of your lights. The other wire from each of your bulbs can then be wired to the necessary outputs from the decoder. The VR1.5 will also benefit from any KeepAlive device you may be using with your decoder!
 
The VR1.5 is a great Add-On for Athearn installations if you are not using a TCS motherboard with onboard 1.5V power supply.
 
The VR1.5 is rated for input voltages ranging from 8 - 20 Volts DC, and has a maximum rated output current of 120mA.
 
The VR1.5 will take power from the positive 12v (blue wire) and the negative (black w/ white stripe wire) from your decoder and output a steady, highly accurate 1.5 volts on the tan wire. This is ideal for working with 1.5v bulbs in situations where resistors are unwanted or unusable. Designed specifically for use with the T4X and T6X, the VR1.5 can be used with any decoder where the the ground and common are available for wire attachment.

Decoder Specifications:

  • Size: 0.756 x 0.429 x 0.13 in (19.2 x 10.9 x 3.3 mm)
  • Connection: Hardwire
  • Motor Rating: NA
  • Functions: (2) 200mA outputs (400mA Total)
  • BEMF: NA
  • Protocol: NMRA DCC Compliant
  • Additional Features:

 

View AllClose

Additional Resources

MANUFACTURERS WEBSITE:
SOUND CONFIGURATION & SOUND FILE RESOURCES:
FIRMWARE & SOFTWARE RESOURCES:
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES:
MANUFACTURERS WARRANTY & REPAIRS:
ADDITIONAL INFORMATION - DCC TIPS:
ADDITIONAL INFORMATION (1):
ADDITIONAL INFORMATION (2):
NA
View AllClose

Additional Information

PRODUCT CLASS :
Standard (HO-S-O*)
DECODER TYPE:
Function Only*
DECODER INTERFACE (PRIMARY):
Hardwire - Single Wires
DECODER INTERFACE (SECONDARY):
NA
SIZE-INCH (L x W x H):
0.76 x 0.43 x 0.13 in
SIZE-METRIC (L x W x H):
19.2 x 10.9 x 3.3 mm
MOTOR CURRENT (CONTINUOUS):
NA
MOTOR CURRENT (PEAK):
NA
FUNCTION CURRENT (MAX):
0.120mA Total
NORMAL OUTPUT FUNCTIONS:
x**
LOGIC-LEVEL FUNCTIONS:
0
SERVO OUTPUT FUNCTIONS:
0
FUNCTION INPUTS:
0
KEEP-ALIVE INTERFACE:
NA
KA INPUT VOLTAGE (MAX):
NA
KA TOTAL CAPACITANCE:
NA
CV PROGRAMMING:
Service Mode + P.O.M.
FIRMWARE UPDATE:
No
PROTOCOL:
NMRA DCC
BI-DIRECTIONAL COMMUNICATION:
NA
ADDITIONAL FEATURES:
NA
NOTES (1):
* - Voltage regulator function only (No additional function outputs)
NOTES (2):
** - Can be used with any number of function outputs but cannot exceed maximum function current rating
View AllClose