Bulk Order

Tam Valley Depot DCC Dual Frog Juicer/Auto-Reverser/Circuit Breaker     For all DCC systems including NCE PowerCab.     This board can be configured to use as an automatic polarity reverser for two frogs, a reversing loop, a...

Tam Valley Depot DCC Hex Frog Juicer (Polarity Reverser for Frogs)  For DCC systems 2 Amps to 8 Amps including NCE PowerCab.     This board can be configured to use as an automatic polarity reverser for six frogs, or a reverser for one...

Tam Valley Depot DCC Mono Frog Juicer (Polarity Reverser for Frogs) For all DCC systems including NCE PowerCab.     This board is an automatic polarity reverser for a single frog.  Setup is simple, connect two wires to the DCC bus and...

Tam Valley Depot DCC Remote Aligner for Quad-LN     Used with the Quad-LN for alignment of servos.     Just one of these needed for all of your Quad-LNs.     Comes with a 10' cable which allows you to stand next to your...

Tam Valley Depot DCC Servo Centering Tool     Use this handy portable tool to keep your servos centered while you mount them under the layout.     The tool consists of a battery box connected to a small circuit board that...

Tam Valley Depot DCC Servo L-Bracket Mounting Kit This is a nice way to mount servos for operating a semaphore blade.   ...

Tam Valley Depot DCC SwitchWright Power Board 5 Volt 2 Amp DC to DC Converter If you aready have a DC accessory power bus and want to run SwitchWrights you can use this board to...

Tam Valley Depot DCC Turn On Module Soft Start Circuit For Large Inrush Currents of Sound Decoders and Stay Alive Decoders   If you have a lot of sound decoders and decoders with stay alive circuits on the track, they can confuse the booster...

TCS 1000 A4X DCC Decoder - HO Drop-in AT-Style Board     The A4X is four function HO-scale "drop-in" style mobile decoder for Atlas, Athearn, Kato, etc. locomotives. Examples include the...

TCS 1001 A6X DCC Decoder - HO Drop-in AT-Style Board     The A4X is four function HO-scale "drop-in" style mobile decoder for Atlas, Athearn, Kato, etc. locomotives. Examples include the...

TCS 1002 FL2 Function-Only DCC Decoder - NMRA 6-pin JST to Hardwire     This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and...

TCS 1004 FL4 Function-Only DCC Decoder - Hardwire     This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and wiring. These...

TCS 1006 M1 DCC Decoder - Hardwire     The M1 is a small form factor hard-wire decoder with 2 lighting functions for HO-scale and N-scale installations. This decoder is designed for installations where space is limited. This decoder is also...

TCS 1011 M4 DCC Decoder - Hardwire     The M4 is a small form factor hard-wire decoder with 4 lighting functions for HO and N scale installations. This decoder is designed for installations where space is limited. This decoder is also...

TCS Decoders offer the following features: NMRA DCC CompliantDC or DCC Operation, 2 or 4 Digit Addressing, 14-28-128 Speed Steps, and ConsistingTCS Exclusive Auto-Adjusting BEMFQuiet Drive for super quiet engine performanceThree-step...

TCS 1028 DP2X DCC Decoder - NEM652 8-pin Integral Connector     HO-Scale decoder designed as a direct-plug replacement decoder for engines equipped with 8-pin NMRA sockets. By far one of the easiest decoders to install, the DP2X can be plugged...