Bulk Order

Tam Valley Depot DCC Turn On Module Soft Start Circuit For Large Inrush Currents of Sound Decoders and Stay Alive Decoders   If you have a lot of sound decoders and decoders with stay alive circuits on the track, they can confuse the booster...

TCS 1000 A4X DCC Decoder - HO Drop-in AT-Style Board     The A4X is four function HO-scale "drop-in" style mobile decoder for Atlas, Athearn, Kato, etc. locomotives. Examples include the...

TCS 1001 A6X DCC Decoder - HO Drop-in AT-Style Board     The A4X is four function HO-scale "drop-in" style mobile decoder for Atlas, Athearn, Kato, etc. locomotives. Examples include the...

TCS 1004 FL4 Function-Only DCC Decoder - Hardwire     This function-only decoder is designed for any scale where extra lighting features and functions are needed. This decoder includes a 6-pin harness for easy installation and wiring. These...

TCS 1006 M1 DCC Decoder - Hardwire     The M1 is a small form factor hard-wire decoder with 2 lighting functions for HO-scale and N-scale installations. This decoder is designed for installations where space is limited. This decoder is also...

TCS 1011 M4 DCC Decoder - Hardwire     The M4 is a small form factor hard-wire decoder with 4 lighting functions for HO and N scale installations. This decoder is designed for installations where space is limited. This decoder is also...

TCS Decoders offer the following features: NMRA DCC CompliantDC or DCC Operation, 2 or 4 Digit Addressing, 14-28-128 Speed Steps, and ConsistingTCS Exclusive Auto-Adjusting BEMFQuiet Drive for super quiet engine performanceThree-step...

TCS 1028 DP2X DCC Decoder - NEM652 8-pin Integral Connector     HO-Scale decoder designed as a direct-plug replacement decoder for engines equipped with 8-pin NMRA sockets. By far one of the easiest decoders to install, the DP2X can be plugged...

TCS 1029 AMD4 DCC Decoder - N Drop-in Board for Atlas GP40-2, U25B, SD35, Trainmaster, B23-7 and others     The AMD4 is a N-scale drop-in decoder for Atlas locomotives. Examples include the...

TCS 1030 MP15N DCC Decoder - N Drop-in Board for Atlas MP15N     The MP-15N is a N-scale drop-in decoder which is designed for the Atlas MP-15 locomotive. See the installation pages for a full list of compatible engines! Back EMF Load...

TCS 1031 VO-1000 DCC Decoder - N Drop-in Board for Atlas VO-1000     The VO-1000 is a N-scale drop-in decoder which is specifically designed for the Atlas VO-1000 locomotive. See the installation pages for a full list of compatible...

TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire     Never wire another resistor for 1.5v bulbs! The VR1.5 can be used with any decoder to supply a 1.5V regulated supply for all of your light bulbs.   To use the VR1.5, connect the...

TCS 1033 Wire Harness - T-WH - NMRA 9-pin JST to Hardwire     9-Pin JST for use with decoders that use a 9-Pin JST interface. Use this harness to connect any decoder with a 9-Pin JST connector to your locomotive. Examples of decoders with this...

TCS 1034 Wire Harness - MC-WH - 7-pin Micro JST to Hardwire     The MC-WH is a 7 pin JST connector designed for use with TCS MC-series decoders. The connector has 6" (15.24cm) long 32 AWG wires.    

TCS 1036 Wire Harness - C628 - 8-pin NMRA (NEM652) to 9-pin JST for C628     C628 is a harness for the C628/C630 for the T series.    

TCS 1037 Wire Harness - E6 - 8-pin NMRA (NEM652) to 9-pin JST for P2K E6     The E6 harness is designed to fit in the Life Like Proto 2000 E6 Locomotive.With special wiring for mars light.  Works with all T series decoders.