Bulk Order

TCS 1479 KAM4-LED DCC Decoder - Hardwire     This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is...

TCS 1481 K0D8-E DCC Decoder - N Drop-in Board for Kato PA, E5, E6, E8, E9 A-Units     The K0D8 is a N-scale drop-in decoder for Kato locomotives. Examples include the following: Kato: ALCO PA-1 E5A E6A E8A E9A See the Installation Pages for...

TCS 1482 T4-LED DCC Decoder - NMRA 9-pin JST to Hardwire   The T4-LED has added Blue and Black/White wires to use a KeepAlive device. This model now includes a 2-pin JST Plug for the KA-P Family of KeepAlive® devices. This decoder may...

TCS 1482 T4-LED Version 1 DCC Decoder - NMRA 9-pin JST to Hardwire   The T4-LED Version 1 does not have added Blue and Black/White wires to use a KeepAlive device. This model does not include a 2-pin JST Plug for the KA-P Family of...

TCS 1483 DCC Decoder AF1 Analog Filter     The Analog Filter 1 (AF1) is used to filter the DC signal leaving the power pack. This filter pack corrects flickering in lighting effects and low-speed auto-reversing. Only one AF1 is required to...

TCS 1484 T1-LED DCC Decoder - NMRA 9-pin JST to Hardwire     The T1 LED has added Blue and Black/White wires for the use of a KeepAlive device. This decoder has internal resistors for LEDs eliminating the use of external resistors for F0F or...

TCS 1485 KAM4 DCC Decoder - Hardwire     This decoder is a M4 decoder with built in Keep-Alive™, and will keep your locomotive operating for 6-15 seconds without power (As a result of dirty track, poor contacts, etc.). This decoder is...

TCS 1489 K5D7 DCC Decoder - N Drop-in Board for Kato "Metra" F40PH     The K5D7 is a N-scale drop-in decoder specifically designed to fit the Kato F40PH locomotive. This decoder includes onboard LED’s for the forward, reverse, and red...

TCS 1490 Wire Harness - JST7 - 7-pin Micro JST Male to 7-pin Micro JST Female In-Line Connector     This is a simple, 7 pin, JST, wired connector. When connected together it is .35" wide by .158" tall by .416" long, and it has 6" long wires on...

TCS 1491 4-pin Micro Connector (Black and White)     This is a simple, four pin, 1 mm (0.039") pitch, micro quick plug wired connector. These amazing new micro connectors are nearly half the size of our popular, super-small Mini Connectors...

TCS 1492 4-pin Mini Connector (Black and White)     This is a simple, four pin, 1.27mm (0.05") pitch, mini quick plug wired connector. When connected together it is .21" wide by .085" tall by .243" long, and it has 7" long wires on both ends...

TCS WOWSound DCC Sound Decoder - WOW101-SteamThe WOW101 is a universal decoder for locomotives with DCC-ready 9-pin plugs, or locomotives which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any...

TCS WOWSound DCC Sound Decoder - WOW101-KA-Steam The WOW101 is a universal sound decoder for locomotives with DCC-ready 9-pin plugs, or which cannot accommodate a motherboard or WOWKit. This decoder may be hard-wired or plugged directly into any...

TCS 1518 4-Point Junction Board (25pk)       These 4-Point Junction Boards have 4 solder pads joined together by 4 circuit traces. Use these boards to connect wires, resistors, bulbs, LED's, etc. without having to solder wires directly...

TCS 1519 2-pin Mini Connector (Black and Red)     This is a simple, two pin, 1.27mm (0.05") pitch, mini quick plug wired connector. When connected together it is .12" wide by .085" tall by .243" long, and it has 7" long wires on both ends. This...

TCS 1520 2-pin Micro Connector (Black and Red)     This is a simple, two pin, 1 mm (0.039") pitch, micro quick plug wired connector. These amazing new micro connectors are nearly half the size of our popular, super-small Mini Connectors that we...