NCE DCC 5 Pin Wiring Harness Set (5 pk)   5 pack of 5 pin wiring harness sets

NCE DCC 4 Pin Wiring Harness Set (6 pk)   6 pack of 4 pin wiring harness sets  

NCE DCC 3 Pin Wiring Harness Set (8 pk)   8 pack of 3 pin wiring harness sets  

NCE DCC 2 Pin Wiring Harness Set (12 pk)   12 pack of 2 pin wiring harness sets

NCE DCC 0.3 F 2.7V Super Capacitor (6 pk)6 pack of .3 farad (300,000 microfarad) 2.7v super capacitors Lead Spacing - 0.059" (1.50mm) Size / Dimension - 0.157" Dia (4.00mm) Height - Seated (Max) - 0.492" (12.50mm)  

NCE DCC Track Power Bus Snubber / RC Filter (2 pk)    Use with any DCC system to prevent large voltage spikes.  Reduces or eliminates voltage spikes on long runs of DCC bus wire  Protects decoders from damaging inductive voltage...

NCE DCC Toggle Switch, DPDT - On-On (5 pk)   5 pack On/On DPDT Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole   

NCE DCC Toggle Switch, SPST - On-On (6 pk)   6 pack On/On SPST Toggle Switch 5a /125v 1/4 (6.35mm) mounting hole   

NCE DCC Push Button Switch, SPST - N.O. Momentary - Green (8 pk)   8 pack N.O. Momentary SPST Pushbutton Green 1/4 (6.35mm) mounting hole.  

NCE DCC Push Button Switch, SPST - N.O. Momentary - Red (8 pk)   8 pack N.O. Momentary SPST Pushbutton Red 1/4 (6.35mm) mounting hole.  

NCE DCC Push Button Switch, SPST - N.O. Momentary - Black (8 pk)   8 pack N.O. Momentary SPST Pushbutton Black 1/4 (6.35mm) mounting hole.  

NCE DCC Layout Wiring - Euro12-2 12 Circuit Eurostyle Terminal Strip (2 pk)   12 circuit Eurostyle Term strip, Package of 2, 14-24 AWG.  

NCE DCC Layout Wiring - Euro8-2 8 Circuit Eurostyle Terminal Strip (2 pk)   8 circuit Eurostyle Term strip, Package of 2, 14-24 AWG.  

NCE DCC Layout Wiring - Euro6-3 6 Circuit Eurostyle Terminal Strip (3 pk)   6 circuit Eurostyle Term strip, Package of 3, 14-24 AWG.  

NCE DCC Layout Wiring - Euro4-4 4 Circuit Eurostyle Terminal Strip (4 pk)   4 circuit Eurostyle Term strip, Package of 4, 14-24 AWG.  

NCE DCC Layout Wiring - Euro3-5 3 Circuit Eurostyle Terminal Strip (5 pk)   3 circuit Eurostyle Term strip, Package of 5, 14-24 AWG.  

NCE DCC Layout Wiring - Euro2-5 2 Circuit Eurostyle Terminal Strip (5 pk)   2 circuit Eurostyle Term strip, Package of 5, 14-24 AWG.  

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 12 Pair   24 Anderson power poles, 12 red, 12 black, 12-16 AWG.  

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 4 Pair   8 Anderson power poles, 4 red, 4 black, 12-16 AWG.  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (10 pk)   Power Drop Wires, Red, package of 10, 22 AWG  

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (20 pk)   Male Quick Connect, (Red), package of 20, 18-22AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (20 pk)   Track Bus Taps, (Blue), package of 20, 14-16AWG  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (25 ft)   DCC Main Bus Wire, (Red), 14 AWG, 25 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (25 ft)   DCC Main Bus Wire, (Black), 14 AWG, 25 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (100 ft)   DCC Main Bus Wire, (Red), 14 AWG, 100 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (100 ft)   DCC Main Bus Wire, (Black), 14 AWG, 100 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (50 ft)   DCC Main Bus Wire, (Red), 14 AWG, 50 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (50 ft)   DCC Main Bus Wire, (Black), 14 AWG, 50 Feet  

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (64 pk)   Male Quick Connect, (Red), package of 64, 18-22AWG  

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (32 pk)   Male Quick Connect, (Red), package of 32, 18-22AWG  

NCE DCC Layout Wiring - Track Bus Taps - 10-12 AWG (Yellow) (32 pk)   Track Bus Taps, (Yellow), package of 32, 10-12AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (64 pk)   Track Bus Taps, (Blue), package of 64, 14-16AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (32 pk)   Track Bus Taps, (Blue), package of 32, 14-16AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (32 pk)   Power Drop Wires, Red, package of 32, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (32 pk)   Power Drop Wires, Black, package of 32, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (16 pk)   Power Drop Wires, Red, package of 16, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (16 pk)   Power Drop Wires, Black, package of 16, 22 AWG  

NCE DCC Layout Wiring Kit - 100ft DCC Power Bus Layout Wiring Kit, 100 Foot DCC power bus. DCC main bus wiring for typical 100 foot double track mainline. Includes: Main Bus - 100 feet each red and black 14 AWG stranded wire Feeder Wires - 32 each red...

NCE DCC Layout Wiring Kit - 50ft DCC Power Bus Layout Wiring Kit, 50 Foot DCC power bus. DCC main bus wiring for typical 50 foot double track mainline. Includes: Main Bus - 50 feet each red and black 14 AWG stranded wire Feeder Wires - 16 each red and...

NCE DCC Layout Wiring Kit - 25ft DCC Power BusLayout Wiring Kit, 25 Foot DCC power bus. DCC main bus wiring for typical 25 foot double track mainline. Includes: Main Bus - 25 feet each red and black 14 AWG stranded wire Feeder Wires - 10 each red and...

NCE DCC Heatshrink Tubing Pack - 3/64", 1/16", 3/32"   Assorted heatshrink tubing, 10 feet.  

NCE DCC WWLEDx20 3mm Warm White LED (20 pk)   Warm white LED, 3mm, qty 20.  

NCE DCC Locomotive Installation LED Lighting Kit   LED lighting, 20 LEDs, LED Tester, 50 feet ultra flex #32 wire, 40 resistors, 3 sizes heatshrink.  

NCE DCC Locomotive Decoder Installation Wiring KitLoco Wiring Kit for N/HO, 8 wire colors (80 feet ultra flex 30/32 AWG wire) , 3 sizes heatshrink.  

*** PLEASE NOTE: The Brutus Power Supply is specifically excluded from the FREE SHIPPING offer because of size and weight. ***     NCE DCC Brutus 10A 18V Power Supply This product is designed to be used with the PH-10, PH-10R and PB110A. User...

NCE DCC P314 Power Supply 13.8V 3A for DCC TwinP314 13.8v DC 3 Amp Power Supply for DCC Twin. Do not purchase this for use with the Power Cab. Don't forget to use a REAL surge protector not a power strip.  

NCE DCC P514 Power Supply 12V - 13.8V 5A for DB5 - PB5 - SB512/13.8 Volt DC, 5 Amp internationally approved power supply. This is a replacement power supply for the SB5 Smartbooster. Do not purchase this for use with the Power Cab. The Power Cab requires...

NCE DCC Dual Relay Board - High power Isolated Output For Switch8-Mk2   Dual relay board for isolated output of Switch8 or Switch-It.   2 Amp Relay for Connection to Switch-It or Switch 8 Accessory Decoder  

NCE DCC 6-wire to  8-wire Cab Bus Adapter Cable8-wire adapter, converts 6 wire cab bus signals to 8 wire cab bus signals.  

NCE DCC UTP-CAT5 Cab Bus Facia Panel     Same six-wire connectors in front as standard UTP but allows use of off-the-shelf CAT5 cables to connect panel-to-panel at rear. Can be used as a cab bus splitter and also adds the ability to add power...

NCE DCC AR10 Auto Reverser with Circuit BreakerThe AR10 is an automatic reverse loop controller for DCC layouts. In addition it functions as a circuit breaker for the reverse loop. Very simple connections: Two wires to the main line and two wires to the...

NCE DCC Mini Panel Automation ControllerUse one button to control multiple switches or macros on your NCE DCC system. You can have up to 30 pushbuttons, toggle switches, block detectors, etc. Can be connected for control of turnouts, signals, and other...

NCE DCC CP6 Replacement Lamps - 1APack of 6 replacement lamps for the CP6 circuit protector. 1 Amp  

NCE DCC CP6 Circuit Protection - 6 BlockBasic Circuit Protector. You can connect up to Six Outputs with 1 amp of protection per output. Light bulbs protect locomotivr and commadn station from damage. Highly visible indication when you have a short...

NCE DCC Power Cab Auto-SW Program Track SwitchAuto SW: Adds a program track output to the Power Cab. Prevents accidental programming of locos on your mainline track when using Program Track mode. Automatically disconnects your main line when in...

NCE DCC EB1 v1.1 Electronic Circuit BreakerProvides short circuit protection for one power district. Can be used with most DCC systems. Default trip time is 30 times faster compared to the basic overload setting in all NCE systems. Electronic circuit...

NCE DCC USB Interface PC Connection PanelComputer Interface for Power Cab. Requires the NCE Power Cab, a USB cable, and a computer with one free USB port. Plug and play with Windows 10: No driver installation needed. Remove all jumpers from board for...

NCE DCC Power Cab PCP Cab Bus Facia Connection PanelPower Cab connection panel has jacks on rear for track output and power input from the P114 power supply. The Power Cab plugs in on the front in the LEFT side with the flat cable. Facia Plate and two...

NCE DCC P114 Power Supply 24W 13.8V for Power Cab P114 13.8v 24 watt DC Power Supply. US approved power supply suitable for Power Cab and other applications. Replacement power supply for the Power Cab kit. Using ANY other power supply for the Power Cab...

NCE DCC Straight-RJ12-40 Straight Cab Bus CableRJ12-40, 6 wire straight cab bus cable, 40 feet long. Not approved for use with the Power Cab. 26awg wires For use with the Pro Cab, and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus...

NCE DCC P515 Power Supply 5A 15V for DB5 - PB5 - SB5     P515 15 Volt AC, 5 Amp Linear Power Supply suitable for PH-Pro, PB105, Digitrax, etc. Approved for US use only. This is a primary 5 amp AC transformer with an internal 5 amp fuse...

NCE DCC Straight-RJ12-12 Straight Throttle Cable RJ12-12, 6 Wire straight cab bus cable, 12 ft long. Not approved for use with the Power Cab. For use with the Pro Cab and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus panels. The...

NCE DCC Straight-RJ12-7 Straight Throttle Cable RJ12-7 6 Wire straight cab bus cable.   For use with the Power Cab, and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus panels. The standard NCE cab bus cable. 6 Wire (6P6C)...

NCE DCC NMRA 8-pin (NEM652) Plug PackTen pack of the NMRA eight-pin connectors used in many "DCC Ready" locomotives and accessories.  

NCE DCC Coilcord-DIN 7 foot coiled cord with molded right angle DIN plug        

NCE DCC Coilcord-RJ 7' Coiled Throttle Cable A 7 foot four wire coiled cable for cabs. Has RJ12 connectors on both ends. This cable does not provide track power. Important Note! You cannot use this with a Power Cab UNLESS you ALSO have an SB5...

NCE DCC UTP Cab Bus Facia PanelThis is our lowest cost, easiest to use, cab bus panel. All four RJ-12 jacks are wired in parallel for easy plug and play use. This board also provides a convenient point to add additional 12 Volt cab bus power for long...

NCE DCC BD20 Block Dectector UnitDetects DCC track current being drawn through a single track feeder. Isolated so there is no direct electrical connection to the track. Needs no external power for most operations. Can be connected to the NCE AIU01 or...

NCE DCC AIU01 Auxiliary Input UnitThe Auxiliary Input Unit (AIU) provides a means of connecting external devices such as switch contacts, Block Detectors (BD20), or other sensors to the NCE Cab Bus or Command Station. These external devices can be...

NCE N14A3 DCC Decoder - N Drop-in Board for Atlas GP39-2 and others     Direct plug in to Atlas GP39-2, Intermountain SD40-2 plus other plug-and-play N Scale locos   NCE Decoders offer the following features: Torque Compensation for...

NCE Next18 DCC Decoder - NEM662 Next18 Integral Connector     Direct plug in to locos equipped with Next18 (NEM-662) socket   Features of this decoder: Silent Running ,torque compensated motor drive Torque Compensation for ultra smooth...

NCE D13WP DCC Decoder - NEM652 8-pin Wired PlugD13WP decoder with 8 pin plug - new smaller replacement for D13SRP Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Silent Running torque compensated motor drive Torque Compensation for...

NCE D13J DCC Decoder - NMRA 9-pin JST to Hardwire (10 Pk) D13J Decoder - new smaller replacement for D13SRJ   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Direct plug in to Athearn and other locos equipped with NMRA 9 pin...

NCE D13J DCC Decoder - NMRA 9-pin JST to Hardwire   D13J Decoder - new smaller replacement for D13SRJ   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Direct plug in to Athearn and other locos equipped with NMRA 9 pin...

NCE D13J DCC Decoder NMRA - NMRA 9-pin JST to Hardwire   D13J Decoder - new smaller replacement for D13SRJ   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm   Direct plug in to Athearn and other locos equipped with NMRA 9...

NCE D13W DCC Decoder - Hardwire D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth low...

NCE D13W DCC Decoder - Hardwire   D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth...

NCE D13W DCC Decoder - Hardwire D13W Decoder - new smaller replacement for D13SR   Dimensions: 1.03 x 0.630 x .185 inches 26 x 16.5 x 4.7 mm     NCE Decoders offer the following features: Torque Compensation for ultra smooth low...

NCE N14K2 DCC Decoder - N Drop-in Board for Kato SD80/90MAC Series, RSC2, RS2   Drop in decoder for Kato N scale INCLUDES pre-soldered motor clips   Fits: Kato RS2 Kato RSC2 Kato SD80 Kato SD80MAC Kato SD90/43MAC Life Like RS2 Walthers...

NCE N14K1 DCC Decoder - N Drop-in Board for Post-2006 Kato SD40-2   Drop in decoder for Kato N scale INCLUDES pre-soldered motor clips   Fits: Athearn EMD F45 Athearn EMD FP45 Kato "Gevo" ES44AC Kato AC4400 Kato C30-7 Kato GE C44-9W Kato...

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator contains three programmable lighting outputs with a...

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator contains three programmable lighting outputs with a...

NCE DCC Light-It Function-Only Lighting And Signal DCC Decoder - Hardwire   The Light-It is a multi-purpose programmable DCC lighting decoder.  One Light-It contains three programmable lighting outputs with a complete array of lighting effects...

NCE DCC Light-It Function-Only Lighting And Signal DCC Decoder - Hardwire   The Light-It is a multi-purpose programmable DCC lighting decoder.  One Light-It contains three programmable lighting outputs with a complete array of lighting effects...

NCE DCC Light-It Function-Only Lighting And Signal DCC Decoder - Hardwire   The Light-It is a multi-purpose programmable DCC lighting decoder.  One Light-It contains three programmable lighting outputs with a complete array of lighting effects...

NCE N12-NEM DCC Decoder - NEM651 6-pin Integral Connector     Plug in 4 function decoder with 6 pin NEM 651 connector.   NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Silent...

NCE NH15/16-44 DCC Decoder - N Drop-in Board for Atlas H15/16-44   Plug and Play decoder for the N-Scale Atlas H15-44 and H16-44. 1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed.   NCE Decoders offer the following...

NCE D16MTC DCC Decoder - NMRA-NEM660 21MTC Integral Connector6 function decoder with direct plug into locos equipped with NMRA 21 pin MTC (NEM660) plug.   Dimensions: 0.900 x 0.615 x .180 inches 23 x 16 x 4.7 mm   Features of this...

NCE DCC "SwitchIt-Mk2" Stall Motor Stationary Switch DecoderFOR STALL MOTOR MACHINES ONLY, NOT FOR USE WITH TWIN COIL SWITCH MACHINES  All new easy programming! Control for 2 Tortoise switch machines Remembers the position of switch during power...

NCE DCC "Q-Snap" Quad Twin Coil Stationary Switch Decoder FOR TWIN COIL SWITCH MACHINES ONLY   All new easy programming! Control for 4 twin coil solenoid type switch machines (Atlas, Peco, etc) Supports the full range of DCC accessory addresses...

NCE DCC Button-Board - Local Push Button Add-On For Switch8-Mk2Add up to 16 push buttons to Switch8-Mk2 - Accomodate N.O. Pushbuttons or toggle switches - Simple hook up, 3 wires to Switch8-Mk2.  

NCE DCC "Switch8-Mk2" Stall Motor Stationary Switch DecoderEasy programming with no jumpers. On board LED display. Control for 8 Tortoise switch machines. Remembers the position of switch during power outages. Supports the full range of DCC accessory...

NCE Medium "No-Halt" DCC Decoder Stay-Alive Device - Hardwire   Dimensions: 2.14" x 0.640 x 0.400" (54 x 16 x 10 mm) High power version for larger locomotives - Eliminates or reduces the following due to dirty track or unwired switch...

NCE Small "No-Halt" DCC Decoder Stay-Alive Device - HardwireThe small no halt will allow a typical HO locomotive to travel up to 3 feet of dirty track and still operate the lights with NO FLICKER. Do not exceed DCC track voltage of 15v...

NCE D13NHP DCC Decoder w/ Small No-Halt Module - NEM652 8-pin Wired Plug   Direct plug in to locos equipped with NMRA 8 pin plug Caution: Not for use with more than 15 Volts track voltage   NCE Decoders offer the following features: Torque...

NCE D13NHJ DCC Decoder w/ Small No-Halt Module - NMRA 9-pin JST to Hardwire   Direct plug in to Athearn and other locos equipped with NMRA 9 pin DCC  Quick Plug with small no halt module installed Caution: Not for use with more than 15...

NCE N12K0B DCC Decoder - N Drop-in Board for Kato F3 A & B   Drop in decoder for Kato N-Scale F3 A&B, F7 A&B and others, White LEDs.  1 Amp (1.25 peak) rating.    NCE Decoders offer the following features: Torque...

NCE N12A2 DCC Decoder - N Drop-in Board for Atlas GP7/GP9, GP15, GP30, GP35   N Scale Plug and Play decoder for the new Atlas "Classic" locomotives GP30, GP35, GP7, GP9.  1 Amp (1.25 peak) rating. Golden Glow LEDs are included and installed...

NCE NAVO DCC Decoder - N Drop-in Board for Atlas VO-1000   Made to fit the Atlas N scale VO1000 loco with two functions.   NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Programmable...

NCE N14SRP DCC Decoder - NEM652 8-pin Wired Plug    NCE Decoders offer the following features: Torque Compensation for ultra smooth low speed performance Programmable Start, Mid and Maximum speed works for all speed modes Motor rating 1 Amp...