Command Stations, Boosters, Throttles, Accessories

TCS 1558 TrainSpeed Replacement Sensor Cable     A replacement sensor cable for use with the Trainspeed 1 and Trainspeed 4.    Perfect if you need to move your Trainspeed to a new layout, or one of your cable gets damaged during...

TCS 1570 TCS UWT-100 Throttle Holder     Buy this pack and save on UWT-100 Throttle holders! This holder only fits the UWT-100.   Includes: 1 - 3D printed holder designed perfectly for the UWT-100 throttles 1 - Bags of 4...

TCS 1571 TCS UWT-100 Throttle Holder 3-Pack     Buy this pack and save on UWT-100 Throttle holders! This holder only fits the UWT-100.   Includes: 3 - 3D printed holder designed perfectly for the UWT-100 throttles 3 - Bags of 4...

TCS 1572 TCS Throttle Holder     Buy this pack and save on UWT-50/100 Throttle holders! This holder can be used with the UWT-50, LT-50, or UWT-100!   Includes: 1 - 3D printed holder designed perfectly for UWT-50, LT-50, and UWT-100...

TCS 1573 TCS Throttle Holder 3-Pack     Buy this pack and save on UWT-50/100 Throttle holders! This holder can be used with the UWT-50, LT-50, or UWT-100!   Includes: 3 - 3D printed holder designed perfectly for UWT-50, LT-50, and...

TCS 1597 BA-100 Booster Adapter     The BA-100 “Booster Adapter” is a product which can be used to connect different manufacturers’ DCC boosters (and command stations) together. This product is intended to offer a quick and...

TCS 1598 LT-50 LCC Throttle Facia Panel     This product is an expansion panel for an LCC network, such as those created and used by the CS-105 and LT-50. Use this product to expand the number of wired throttles such as the T-50 you can connect...

TCS 1599 LT-50 Facia LT Panel     This product is used with the LT-50 "Layout Throttle." This panel can be used to create a DCC track output when used with an LT-50 using the specified jack. A single additional wired LCC throttle can be...

TCS 4000 12V 90W Power Supply for CS-105 DCC & LCC Command StationNew power supply for the TCS CS-105 Command Station and B-106 DCC Booster. Includes 3ft 3-Prong NEMA 5-15P to IEC 60320 C13 (USA) cable. WARNING:  This product is only...

TCS 4001 15V 90W Power Supply for CS-105 DCC & LCC Command Station      New power supply for the TCS CS-105 Command Station and B-106 DCC Booster. Includes 3ft 3-Prong NEMA 5-15P to IEC 60320 C13 (USA) cable. WARNING: ...

TCS 4002 15V 36W Power Supply for LT50 & LCC Throttle Panel     New power supply for power injection to TCS panels and devices. WARNING:  This product is only intended for use with specific TCS products. TCS does not condone the use...

TCS B-106 Auxiliary DCC Booster     The B-106 is an intelligently-designed DCC Auxiliary Booster with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the B-106 is the perfect...

TCS B-106 Auxiliary DCC Booster     The B-106 is an intelligently-designed DCC Auxiliary Booster with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the B-106 is the perfect...

TCS CS-105 -TB2P-B - 2-Pin Terminal Block (Black)   2-Pin screw terminal block. Use Black color for CS-105 programming track. Use Green color for LT-50 track output.   Technical: Current: 20A Number of Levels: 1 Number of Positions: 2 Number...

TCS CS-105 -TB2P-G - 2-Pin Terminal Block (Green)   2-Pin screw terminal block. Use Black color for CS-105 programming track. Use Green color for LT-50 track output.   Technical: Current: 20A Number of Levels: 1 Number of Positions: 2 Number...

TCS CS-105 DCC & LCC Command Station     The CS-105 is an intelligently-designed DCC command station with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the CS-105 is the...

TCS CS-105 DCC & LCC Command Station     The CS-105 is an intelligently-designed DCC command station with LCC integration as well as a built-in RailCom® detector. Thoughtfully designed to outperform in every area, the CS-105 is the...

TCS LT-50 Handheld "Layout Throttle"     The LT-50 "Layout Throttle" is an intelligently-designed wired LCC throttle with a built-in command station. Ergonomically designed to comfortably fit your hand and provide easy access to all of the...

TCS UWT-100 Universal WiFi Throttle       The UWT-100 Universal WiFi Throttle from TCS is the new standard in WiFi control for model railroads. This throttle brings a new level of ergonomic comfort and operational convenience to handheld...

TCS UWT-100 Universal WiFi Throttle Replacement Battery Door     A single battery door for the UWT-100 to replace lost or damaged battery doors.  

TCS UWT-100 Universal WiFi Throttle Replacement Keypad     A single replacement silicone keypad for the UWT-100.  

TCS UWT-50 Universal WiFi Throttle Replacement Battery Door     A single battery door for the UWT-50 to replace lost or damaged battery doors.  

TCS UWT-50 Universal WiFi Throttle Replacement Keypad Membrane     A single replacement silicone keypad for the UWT-50.    

TCS UWT-50 Universal WiFi Mini-Throttle     The UWT-50 Universal WiFi Throttle from TCS is the new standard in utility WiFi control for model railroads. This throttle brings a new level of ergonomic comfort and operational convenience to a...

TCS UWT-50 Universal WiFi Mini-Throttle     The UWT-50 Universal WiFi Throttle from TCS is the new standard in utility WiFi control for model railroads. This throttle brings a new level of ergonomic comfort and operational convenience to a...

TCS WFD-30 NCE CAB Bus Wi-Fi Interface without Fascia Panel     Install this Wi-Fi device on your NCE layout to provide Wi-Fi access.  Then use the power of the TCS universal WiFi throttles on your NCE layout to control trains. A...

TCS WFD-31 NCE CAB Bus Wi-Fi Interface with Fascia Panel     Install this Wi-Fi device on your NCE layout to provide Wi-Fi access.  Then use the power of the TCS universal WiFi throttles on your NCE layout to control trains. A phone with...

ZIMO CAN BUS Ready Made Cable - CAN2.0 BUS To XNet Adapter Cable - 1m Long   ZIMO CAN BUS Ready Made Cables And Cable MaterialCAN2.0 BUS Adapter Cable (= remote cable) 1m for connecting MX32, MX10 MX32FU to (X-Net), only required for simultaneous...

ZIMO MSTAPK DCC Decoder Test and Connector Board - Small Scale with E24 InterfaceThe ZIMO MSTAPK Decoder Test and Connector Boards are the perfect accessory for use with the MXULFA, MX10, and other ZIMO products for updating the decoder software,...

ZIMO MX10 - MX10EC Replacement AntennaReplacement Antenna for MX10 or MX10EC. 13mm DIA x 20cm Long  5dBi 50 ohm

ZIMO MX10 DCC Command StationThe MX10 is the central unit or "Command Station" of the digital control system from ZIMO.The ZIMO Command Station features modern technology and compact design.At first glance, you see the very small dimensions (18 cm wide,...

ZIMO MX33 Tethered Cab DCC Walk Around Hand-held Throttle The tethered MX33 and its wireless version MX33FU walk around hand-held throttles, are the main input devices of digital multi-train control system from ZIMO. They are used together with the MX10...

ZIMO MX33FU Wireless Cab DCC Walk Around Hand-held ThrottleThrottle The tethered MX33 and its wireless version MX33FU walk around hand-held throttles, are the main input devices of digital multi-train control system from ZIMO. They are used together with...

ZIMO MXTAPS DCC Decoder Test and Connector Board - Small ScaleThe ZIMO MXTAP Decoder Test and Connector Boards are the perfect accessory for use with the MXULFA, MX10, and other ZIMO products for updating the decoder software, downloading sound projects...

ZIMO MXTAPV DCC Decoder Test and Connector Board - Large and Small ScaleThe ZIMO MXTAP Decoder Test and Connector Boards are the perfect accessory for use with the MXULFA, MX10, and other ZIMO products for updating the decoder software, downloading sound...

Zimo MXULF-A DCC Decoder Update Module with LCD DisplayThe MXULFA are more than a simple decoder update and programming tool.  It is designed to function as a small digital system. Loading software updates into all models of ZIMO decoders using the...

ZIMO MXULFA Decoder Update Module PC USB CableNew generic USB 2.0 Cable, 1A Male Type A to Mini 5-Pin Type B SPECIFICATIONS: 100% Brand New and High Quality Color: Black Length:50cm Transfer images and data between your camera / cell phone to...

ZIMO MXULFA Decoder Update Module Power Supply - 16V 4.5AFEATURES: Overvoltage and Shortcircuit protection. Short Circuit Protection. Over Temperature Protection. Wide input Voltage range,could stable work under 90v-265v,which makes it safe for your...

ZIMO NG200 Power Supply - 240W 30V 8A IP65 CV+CC The ZIMO NG200 Power Supply is a high-performance dustproof and waterproof AC-to-DC power supply providing up to 240W of power.   The fully-potted silicone and the aluminum case facilitate...

ZIMO NG600 Power Supply - 600W 30V 20A IP65 CV+CC The ZIMO NG600 Power Supply is a high-performance dustproof and waterproof AC-to-DC power supply providing up to 600W of power.  The fully-potted silicone and the aluminum case facilitate...

ZIMO Replacement Green Terminal Block 2 Position 5.08mm     The terminal is suitable for use with the Zimo MXULF and other products. It is the perfect replacement for the factory plug if your original has gotten lost or broken.  

ZIMO START MX10 DCC Command Station with MX33 Handheld and 240W Power SupplyPackage Contents:ZIMO MX10 DCC Command StationZIMO NG200 Power Supply - 240W 30V 8A IP65 CV+CCZIMO MX33 Tethered Cab DCC Walk Around Hand-held ThrottlePlus Terminal Block Set,...

ZIMO START MX10 DCC Command Station with MX33 Handheld and 240W Power SupplyPackage Contents:ZIMO MX10 DCC Command StationZIMO NG200 Power Supply - 240W 30V 8A IP65 CV+CCZIMO MX33FU Wireless Cab DCC Walk Around Hand-held ThrottlePlus Terminal Block Set,...

ZIMO START MX10 DCC Command Station with MX33 Handheld and 240W Power SupplyPackage Contents:ZIMO MX10 DCC Command StationZIMO NG600 Power Supply - 600W 30V 20A IP65 CV+CCZIMO MX33 Tethered Cab DCC Walk Around Hand-held ThrottlePlus Terminal Block Set,...

ZIMO STARTGFU MX10 DCC Command Station with MX33FU Wireless Handheld and 600W Power SupplyPackage Contents:ZIMO MX10 DCC Command StationZIMO NG600 Power Supply - 600W 30V 20A IP65 CV+CCZIMO MX33FU Wireless Cab DCC Walk Around Hand-held ThrottlePlus...

ZIMO MXTAP SUSI CableReplacement 4-pin cable for MXULFA or MXTAP SUSI connection. Length: 6cm  

ZIMO Terminal Block - 2 Position 3.5mmReplacement 2 Position 3.5mm Terminal Block for MX10, MXULFA or MXTAP.  

ZIMO Terminal Block - 2 Position 5.08mmReplacement 2 Position 5.08mm Terminal Block for MX10.  

ZIMO Terminal Block - 2 Position 5.08mm MXULFAReplacement 2 Position 5.08mm Terminal Block for MXULFA.  

ZIMO Terminal Block - 2 Position 7.62mmReplacement 2 Position 7.62mm Terminal Block for MX10.  

ZIMO Terminal Block - 3 Position 3.5mmReplacement 3 Position 3.5mm Terminal Block for MX10.  

ZIMO Terminal Block - 3 Position 5.08mmReplacement 3 Position 5.08mm Terminal Block for MX10.