NCE DCC

ESU - NCE Replacement Green Terminal Block 4 Position 3.81mm     It is the perfect replacement for the factory plug if your original has gotten lost or broken.   The terminal block is suitable for use with the NCE Power House line...

NCE - ZIMO - Roco Z21 Replacement Green Terminal Block 2 Position 3.5mm The terminal is suitable for use with the NCE (Power Cab, Twin, DB5, SB5), QSI Programmer, Roco Z21, Zimo MXULF and other products. It is the perfect replacement for the...

NCE DCC 6-wire to  8-wire Cab Bus Adapter Cable8-wire adapter, converts 6 wire cab bus signals to 8 wire cab bus signals.  

*** PLEASE NOTE: The Brutus Power Supply is specifically excluded from the FREE SHIPPING offer because of size and weight. ***     NCE DCC Brutus 10A 18V Power Supply This product is designed to be used with the PH-10, PH-10R and PB110A. User...

NCE DCC Button-Board - Local Push Button Add-On For Switch8-Mk2Add up to 16 push buttons to Switch8-Mk2 - Accomodate N.O. Pushbuttons or toggle switches - Simple hook up, 3 wires to Switch8-Mk2.  

NCE Cab 06e DCC Handheld Throttle Engineer cab with LED locomotive address display, uses a digital encoder which allows flexibility when controlling multiple locomotives at different speeds. Clear, easy-to-read display, select up to 6 locomotive...

NCE Cab 06e DCC Handheld Throttle Yard Engineer cab with LED display uses a more conventional potentiometer knob for speed control. Definite stop and starting points. Note** the speed setting of the knob is instantly applied to any locomotive selected...

NCE Cab 06p DCC Handheld Throttle Yard Engineer cab with LED display uses a more conventional potentiometer knob for speed control—definite stop and starting points. Note** The current speed setting of the knob is instantly applied to any...

NCE Cab 06r DCC Handheld ThrottleBasic Engineer cab with LED locomotive address display. It uses a digital encoder, allowing flexibility when controlling multiple locomotives at different speeds. Clear, easy-to-read display, select up to 6 locomotive...

NCE DCC Cab06 DCC Handheld Throttle Replacement Keypad Membrane   Replacement Part Only  

NCE DCC Coilcord-DIN 7 foot coiled cord with molded right angle DIN plug        

NCE DCC Coilcord-RJ 7' Coiled Throttle Cable A 7 foot four wire coiled cable for cabs. Has RJ12 connectors on both ends. This cable does not provide track power. Important Note! You cannot use this with a Power Cab UNLESS you ALSO have an SB5...

NCE CS02 Power House DCC Command Station Command Station Only. No track Power Booster. No Power Supply is included This Requires at least a 12v 1 amp power supply NOTE: Not for use with the Power Cab  

NCE DB5 Add-On Booster for SB5 5A DCC w/ P514 Power SupplyThis is a true 5 Amp booster compatible with all NCE and most other DCC systems. Includes an internationally approved 13.8v/12v 5 Amp Power Supply and 12 inch control bus cable for connection to...

NCE DCC Dual Relay Board - High power Isolated Output For Switch8-Mk2   Dual relay board for isolated output of Switch8 or Switch-It.   2 Amp Relay for Connection to Switch-It or Switch 8 Accessory Decoder  

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 12 Pair   24 Anderson power poles, 12 red, 12 black, 12-16 AWG.  

NCE DCC Layout Wiring - Anderson Power Pole Connectors, 4 Pair   8 Anderson power poles, 4 red, 4 black, 12-16 AWG.  

NCE DCC Layout Wiring - Euro12-2 12 Circuit Eurostyle Terminal Strip (2 pk)   12 circuit Eurostyle Term strip, Package of 2, 14-24 AWG.  

NCE DCC Layout Wiring - Euro2-5 2 Circuit Eurostyle Terminal Strip (5 pk)   2 circuit Eurostyle Term strip, Package of 5, 14-24 AWG.  

NCE DCC Layout Wiring - Euro3-5 3 Circuit Eurostyle Terminal Strip (5 pk)   3 circuit Eurostyle Term strip, Package of 5, 14-24 AWG.  

NCE DCC Layout Wiring - Euro4-4 4 Circuit Eurostyle Terminal Strip (4 pk)   4 circuit Eurostyle Term strip, Package of 4, 14-24 AWG.  

NCE DCC Layout Wiring - Euro6-3 6 Circuit Eurostyle Terminal Strip (3 pk)   6 circuit Eurostyle Term strip, Package of 3, 14-24 AWG.  

NCE DCC Layout Wiring - Euro8-2 8 Circuit Eurostyle Terminal Strip (2 pk)   8 circuit Eurostyle Term strip, Package of 2, 14-24 AWG.  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (100 ft)   DCC Main Bus Wire, (Black), 14 AWG, 100 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (25 ft)   DCC Main Bus Wire, (Black), 14 AWG, 25 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Black (50 ft)   DCC Main Bus Wire, (Black), 14 AWG, 50 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (100 ft)   DCC Main Bus Wire, (Red), 14 AWG, 100 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (25 ft)   DCC Main Bus Wire, (Red), 14 AWG, 25 Feet  

NCE DCC Layout Wiring - Main Bus Wire, 14 AWG - Red (50 ft)   DCC Main Bus Wire, (Red), 14 AWG, 50 Feet  

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (20 pk)   Male Quick Connect, (Red), package of 20, 18-22AWG  

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (32 pk)   Male Quick Connect, (Red), package of 32, 18-22AWG  

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (64 pk)   Male Quick Connect, (Red), package of 64, 18-22AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (16 pk)   Power Drop Wires, Black, package of 16, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (32 pk)   Power Drop Wires, Black, package of 32, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (10 pk)   Power Drop Wires, Red, package of 10, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (16 pk)   Power Drop Wires, Red, package of 16, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (32 pk)   Power Drop Wires, Red, package of 32, 22 AWG  

NCE DCC Layout Wiring - Track Bus Taps - 10-12 AWG (Yellow) (32 pk)   Track Bus Taps, (Yellow), package of 32, 10-12AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (20 pk)   Track Bus Taps, (Blue), package of 20, 14-16AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (32 pk)   Track Bus Taps, (Blue), package of 32, 14-16AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (64 pk)   Track Bus Taps, (Blue), package of 64, 14-16AWG  

NCE DCC Layout Wiring Kit - 100ft DCC Power Bus Layout Wiring Kit, 100 Foot DCC power bus. DCC main bus wiring for typical 100 foot double track mainline. Includes: Main Bus - 100 feet each red and black 14 AWG stranded wire Feeder Wires - 32 each red...

NCE DCC Layout Wiring Kit - 25ft DCC Power BusLayout Wiring Kit, 25 Foot DCC power bus. DCC main bus wiring for typical 25 foot double track mainline. Includes: Main Bus - 25 feet each red and black 14 AWG stranded wire Feeder Wires - 10 each red and...

NCE DCC Layout Wiring Kit - 50ft DCC Power Bus Layout Wiring Kit, 50 Foot DCC power bus. DCC main bus wiring for typical 50 foot double track mainline. Includes: Main Bus - 50 feet each red and black 14 AWG stranded wire Feeder Wires - 16 each red and...

NCE DCC Mini Panel Automation ControllerUse one button to control multiple switches or macros on your NCE DCC system. You can have up to 30 pushbuttons, toggle switches, block detectors, etc. Can be connected for control of turnouts, signals, and other...

NCE DCC P1024 Power Supply 10A 24V for PB110, PH10, PH10-R The P1024 is a 24 Volt DC, 220-watt power supply with a US power cord. The power supply is suitable for use with the following NCE products; PB110 booster, PH10, PH10-R (10 amp systems). Note:...

NCE DCC P114 Power Supply 24W 13.8V for Power Cab P114 13.8v 24 watt DC Power Supply. US approved power supply suitable for Power Cab and other applications. Replacement power supply for the Power Cab kit. Using ANY other power supply for the Power Cab...

NCE DCC P314 Power Supply 13.8V 3A for DCC TwinP314 13.8v DC 3 Amp Power Supply for DCC Twin. Do not purchase this for use with the Power Cab. Don't forget to use a REAL surge protector not a power strip.  

NCE DCC P514 Power Supply 12V - 13.8V 5A for DB5 - PB5 - SB512/13.8 Volt DC, 5 Amp internationally approved power supply. This is a replacement power supply for the SB5 Smartbooster. Do not purchase this for use with the Power Cab. The Power Cab requires...

NCE DCC P515 Power Supply 5A 15V for DB5 - PB5 - SB5     P515 15 Volt AC, 5 Amp Linear Power Supply suitable for PH-Pro, PB105, Digitrax, etc. Approved for US use only. This is a primary 5 amp AC transformer with an internal 5 amp fuse...

NCE DCC P519 Power Supply 5A 19V for PH5 - PB5a The P519 is a 19 Volt DC, 4.74 amps, 90 Watt with US power cord. Power supply suitable for use with the following NCE products: PH5 (5 Amp system) and PB5a Booster. Note: For PowerPro (5 Amp system) PB105...

NCE DCC PB105 Booster   5 Amp booster compatible with most NCE DCC systems. This item is not produced in large quantities. Shipping may be delayed if out of stock. A 5 amp Power Supply is required but not included. Order the P515 part number...

NCE DCC PB110 Booster10 Amp Power Booster recommended for O, G and other large scales. The PB-110A provides true 10 Amps of continuous power to your track. Enough to handle MUs of the largest locomotives. A 10 amp Brutus Power Supply is required but...

NCE DCC PB5 Booster 5A DCC w/ P514 Power SupplyContinuous 5 Amp booster that can be added to your existing DCC system. Includes P514 12v/13.8v DC International Power Supply with US power cord Don't forget to use a REAL surge protector not a power...

NCE PH-Box Power Pro DCC Command Station CS & 5A Box   Command Station and 5 Amp Booster combined in one box. A 5 amp Power Supply is required but not included. Order the P515 part number (5240215)  

NCE PH-Pro Power Pro 5A DCC Command Station This 5 Amp starter set has everything you need to get DCC equipped trains up and running (except power transformer, see P515). It includes the user friendly Pro Cab. You can be up and running in less than 20...

NCE PH-Pro R Power Pro 5A DCC Command Station - Radio EquippedThis 5 Amp starter set has everything you need to get DCC equipped trains up and running (except power transformer, see P515). It includes the user friendly Pro Cab. You can be up and running...

NCE Power Pro 10A DCC Command Station The PH-10 has all the same features as our Power Pro 5 Amp system described previously, but with 10 Amps of power for O-Scale and Large Scale (G) layouts. Requires a 18V, 10-12 amp power supply such as the Brutus...

NCE PH10R Power Pro 10A DCC Command Station - Radio Equipped The PH10-R is a wireless equipped system. It is designed to eliminate the need for a tethered throttle. All features of the Pro Cab are usable while in radio mode. Up to 60 additional radio and...

NCE DCC Power Cab Auto-SW Program Track SwitchAuto SW: Adds a program track output to the Power Cab. Prevents accidental programming of locos on your mainline track when using Program Track mode. Automatically disconnects your main line when in...

NCE DCC Power Cab DCC Command StationAn entire DCC system in the palm of your hand. This 2 Amp system can operate up to 4 HO locomotives or 8 N scale locomotives running at the same time. Provides all of the capability and ease of use that you’ve...

NCE DCC Power Cab PCP Cab Bus Facia Connection PanelPower Cab connection panel has jacks on rear for track output and power input from the P114 power supply. The Power Cab plugs in on the front in the LEFT side with the flat cable. Facia Plate and two...

NCE DCC USB Interface PC Connection PanelComputer Interface for Power Cab. Requires the NCE Power Cab, a USB cable, and a computer with one free USB port. Plug and play with Windows 10: No driver installation needed. Remove all jumpers from board for...

NCE Pro Cab DCC Handheld ThrottleOur Deluxe Pro Cab provides the most user-friendly access to all system features. Uncomplicated menus on the easy to read, backlit LCD display guide you through the most advanced operations with a minimum of fuss. Instant...

NCE DCC Pro Cab DCC Handheld Throttle Replacement Keypad Membrane   Replacement Part Only  

NCE Pro Cab R DCC Handheld Throttle - Radio EquippedOur Radio Equipped Pro Cab R provides the most user-friendly access to all system features. Uncomplicated menus on the easy-to-read, backlit LCD guide you through the most advanced operations with...

NCE DCC Push Button Switch, SPST - N.O. Momentary - Black (8 pk)   8 pack N.O. Momentary SPST Pushbutton Black 1/4 (6.35mm) mounting hole.  

NCE DCC Push Button Switch, SPST - N.O. Momentary - Green (8 pk)   8 pack N.O. Momentary SPST Pushbutton Green 1/4 (6.35mm) mounting hole.  

NCE DCC Push Button Switch, SPST - N.O. Momentary - Red (8 pk)   8 pack N.O. Momentary SPST Pushbutton Red 1/4 (6.35mm) mounting hole.  

NCE DCC RB02 Radio Base Station - 916.50MHz Version 2.1Second-generation two-way wireless for DCC. Will handle up to 48 wireless cabs. All features of your cabs are available without plugging in! Radio-equipped cabs automatically switch from radio to...

NCE SB5 Smart Booster 5A DCC w/ P514 Power SupplyAdd an SB5 Smart Booster (command station / power booster) to your Power Cab when you need more locomotive capacity (track power). The SB5 can supply 5 Amps of track power while freeing up your Power Cab...

NCE DCC Straight-RJ12-12 Straight Throttle Cable RJ12-12, 6 Wire straight cab bus cable, 12 ft long. Not approved for use with the Power Cab. For use with the Pro Cab and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus panels. The...

NCE DCC Straight-RJ12-40 Straight Cab Bus CableRJ12-40, 6 wire straight cab bus cable, 40 feet long. Not approved for use with the Power Cab. 26awg wires For use with the Pro Cab, and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus...

NCE DCC Straight-RJ12-7 Straight Throttle Cable RJ12-7 6 Wire straight cab bus cable.   For use with the Power Cab, and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus panels. The standard NCE cab bus cable. 6 Wire (6P6C)...

NCE DCC Straight-RJ9-15 Straight Control Bus Booster Cable15ft control bus booster cable. The NCE standard cable used to connect the two sides of a PH-Pro system box. Can also be used to connect multiple boosters. This is a 4-wire cable with 4P4C small...

NCE DCC Straight-RJ9-25 Straight Control Bus Booster Cable25ft control bus booster cable. The NCE standard cable used to connect the two sides of a PH-Pro system box. Can also be used to connect multiple boosters. This is a 4-wire cable with 4P4C small...

NCE DCC Straight-RJ9-7 Straight Control Bus Booster Cable7ft control bus booster cable. The NCE standard cable used to connect the two sides of a PH-Pro system box. Can also be used to connect multiple boosters. This is a 4-wire cable with 4P4C small...

NCE DCC Toggle Switch, DPDT - On-Off-On (5 pk)   5 pack On/Off/On DPDT Center Off Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole  

NCE DCC Toggle Switch, DPDT - On-Off-On Momentary (3 pk)   5 pack On/Off/On DPDT Center Off Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole  

NCE DCC Toggle Switch, DPDT - On-On (5 pk)   5 pack On/On DPDT Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole   

NCE DCC Toggle Switch, SPST - On-On (6 pk)   6 pack On/On SPST Toggle Switch 5a /125v 1/4 (6.35mm) mounting hole   

NCE DCC Track Power Bus Snubber / RC Filter (2 pk)    Use with any DCC system to prevent large voltage spikes.  Reduces or eliminates voltage spikes on long runs of DCC bus wire  Protects decoders from damaging inductive voltage...

NCE DCC UTP Cab Bus Facia PanelThis is our lowest cost, easiest to use, cab bus panel. All four RJ-12 jacks are wired in parallel for easy plug and play use. This board also provides a convenient point to add additional 12 Volt cab bus power for long...

NCE DCC UTP-CAT5 Cab Bus Facia Panel     Same six-wire connectors in front as standard UTP but allows use of off-the-shelf CAT5 cables to connect panel-to-panel at rear. Can be used as a cab bus splitter and also adds the ability to add power...

SBS4DCC Throttle Lanyard   Tired of dropping your $150 throttles on the ground?  Use this simple solution to tie them and protect your investment.   Installations is easy; just follow these simple instructions.   Throttle Lanyard...