Parts & Supplies

Digitrax DHWH DCC Decoder 9-pin JST to Hardwire Harness (5-pk)     Digitrax 9 pin to bare wire harnesses in 5 packs.   This product is also suitable for use with mnany ESU LokSound, TCS, Soundtraxx, Digitrax, and MRC decoders. ...

Digitrax DNWH DCC Decoder 8-pin Micro JST to Hardwire Harness (5-pk)   Digitrax 7 pin to bare wire harnesses in 5 packs. Lets you share decoders among locomotives 4 wires make it easy to install in N or HO This product is also suitable...

SoundTraxx 810068 Replacement Tsunami Speaker Harness, Steam - Hardwire - NMRA 3-pin JST Plug to Hardwire     Replacement 3-Wire to JST Speaker and Cam harness.   

SoundTraxx 810069 Replacement Tsunami Power Harness, Steam and Diesel - NMRA 9-pin JST to Hardwire     Replacement 9-wire to JST power harness for all TSU-2200 or ECO-200 Digital Sound Decoders.    

SoundTraxx 810156 Wire Harness, ECO-100/TSU-1100 8-Pin Power Harness - NMRA 8-pin Micro JST to Hardwire     Replacement 8-wire power harness for all TSU-1100 or ECO-100 Digital Sound Decoders.  

Soundtraxx 810157 Wire Harness, Econami/Tsunami2 4-Pin Speaker Harness - NMRA 4-pin Micro JST to Hardwire     Replacement 4-wire speaker and lighting harness for Tsunami2 and Econami Digital Sound Decoders.  

TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire     Never wire another resistor for 1.5v bulbs! The VR1.5 can be used with any decoder to supply a 1.5V regulated supply for all of your light bulbs.   To use the VR1.5, connect the...

TCS 1033 Wire Harness - T-WH - NMRA 9-pin JST to Hardwire     9-Pin JST for use with decoders that use a 9-Pin JST interface. Use this harness to connect any decoder with a 9-Pin JST connector to your locomotive. Examples of decoders with this...

TCS 1034 Wire Harness - MC-WH - 7-pin Micro JST to Hardwire     The MC-WH is a 7 pin JST connector designed for use with TCS MC-series decoders. The connector has 6" (15.24cm) long 32 AWG wires.    

TCS 1664 Wire Harness - JST-WH - 6-Pin Micro JST Harness For InterMountain\Bowser MBThis 6-pin JST connector is used to connect lighting functions to our Intermountain/Bowser motherboards. Some of the motherboards we provide have 6-Pin JST connectors for...

TCS 1671 Wire Harness - FL-WH - 6-Pin Micro JST Harness For FL2 DecoderThis 6-pin Mini JST connector is used to wire-up FL2 Fleet Lighter decoders. Attached to the connector are six highly-flexible 30 AWG wires for hard-wiring to your [light]...

ZIMO  8-pin NMRA (NEM652) Female Wired Connector   This is a 8-pin female header on 2,54 mm pin spacing.  This is the mating connector for a ZIMO R - Type decoder, e.g. MX630R, MX645R, and can be installed in a model without an interface...

ZIMO M4000Z Logic Level Function Amplifier   Most ZIMO decoders feature "normal" function outputs and so-called logic level outputs that can be switched between 0 V (for "off") and 5 V (for "on").Logic level outputs are typically an alternative...