Parts & Supplies

Digitrax DHDP DCC Decoder 9-Pin JST Dummy Plug (5-pk)     Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)   This product is also suitable for use with mnany ESU LokSound, TCS, Soundtraxx,...

Digitrax DNDP DCC Decoder 8-Pin Micro JST Dummy Plug (5-pk)   Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack) Lets you run locos as DC or DCC For DC only operation use the dummy plug with either DNWH or...

ESU 51956 LokSound 5 L Pin Header Adapter Board     Dimensions:  TBD - mm x mm x mm To Top Of Pins   On request, this dummy plug replaces a LokSound 5 L or LokSound L V4.0 decoder in locomotives that are to run on analog systems...

NCE DCC Dual Relay Board - High power Isolated Output For Switch8-Mk2   Dual relay board for isolated output of Switch8 or Switch-It.   2 Amp Relay for Connection to Switch-It or Switch 8 Accessory Decoder  

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator contains three programmable lighting outputs with a...

NCE DCC Illuminator Scenic Lighting DCC Decoder For Woodland Scenics Just Plug System   The Illuminator is a Plug and Play multi-purpose programmable DCC lighting decoder. One Illuminator contains three programmable lighting outputs with a...

NCE DCC Track Power Bus Snubber / RC Filter (2 pk)    Use with any DCC system to prevent large voltage spikes.  Reduces or eliminates voltage spikes on long runs of DCC bus wire  Protects decoders from damaging inductive voltage...

TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire     Never wire another resistor for 1.5v bulbs! The VR1.5 can be used with any decoder to supply a 1.5V regulated supply for all of your light bulbs.   To use the VR1.5, connect the...

TCS 1253 8-pin NMRA (NEM652) Socket     8 pin NMRA socket, premade and ready for wires to be soldered on   Can also be used as an extension plug for the DP5 and DP2X decoders.  

TCS 1254 8-pin NMRA (NEM652) Plug 8 pin NMRA plug, pre-made and ready for wires to be soldered on from a decoder/etc. Can be plugged into any locomotive with an 8-pin connector. NOTE: This product does not include wires.    

TCS 1255 8-pin NMRA (NEM652) Plug Kit     All the pieces you need to put together a 8 pin NMRA plug.  

TCS 1260 9-Pin JST Connector     9-pin micro-JST surface mount female connector - used on the T series of decoders.  

TCS 1261 7-Pin Micro JST Connector     7-pin micro-JST surface mount female connector - used on the MC series of decoders.  

TCS 1262 6-Pin Micro JST Connector     6-pin micro-JST surface mount female connecter - used on the backside of the T4X-T6X for the VO-1.5  

TCS 1518 4-Point Junction Board (25pk)       These 4-Point Junction Boards have 4 solder pads joined together by 4 circuit traces. Use these boards to connect wires, resistors, bulbs, LED's, etc. without having to solder wires directly...

ZIMO M4000Z Logic Level Function Amplifier   Most ZIMO decoders feature "normal" function outputs and so-called logic level outputs that can be switched between 0 V (for "off") and 5 V (for "on").Logic level outputs are typically an alternative...