Parts & Supplies

Digitrax DHDP DCC Decoder 9-Pin JST Dummy Plug (5-pk)     Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack)   This product is also suitable for use with mnany ESU LokSound, TCS, Soundtraxx,...

Digitrax DHWH DCC Decoder 9-pin JST to Hardwire Harness (5-pk)     Digitrax 9 pin to bare wire harnesses in 5 packs.   This product is also suitable for use with mnany ESU LokSound, TCS, Soundtraxx, Digitrax, and MRC decoders. ...

Digitrax DHWHP DCC Decoder 9-pin JST to 8-pin NMRA (NEM652) Harness (3)     Digitrax 9 pin to DCC medium plug long harness (3)   This product is also suitable for use with many ESU LokSound, TCS, Soundtraxx, Digitrax, and MRC...

Digitrax DHWH DCC Decoder 9-pin JST to 8-pin NMRA (NEM652) Harness (1)     Digitrax 9 pin to DCC medium plug short harness (1)   This product is also suitable for use with many ESU LokSound, TCS, Soundtraxx, Digitrax, and MRC...

Digitrax DNDP DCC Decoder 8-Pin Micro JST Dummy Plug (5-pk)   Digitrax Dummy Plugs for analog operation of Digitrax Easy Connect harnesses (5 pack) Lets you run locos as DC or DCC For DC only operation use the dummy plug with either DNWH or...

Digitrax DNWH DCC Decoder 8-pin Micro JST to Hardwire Harness (5-pk)   Digitrax 7 pin to bare wire harnesses in 5 packs. Lets you share decoders among locomotives 4 wires make it easy to install in N or HO This product is also suitable...

Digitrax DNWHPS DCC Decoder 8-pin Micro JST to 8-pin NMRA (NEM652) Harness (1) Lets you share decoders among locomotives 2 wires from Digitrax plug to DCC 8 pin plug Fits many HO locomotives with 8 pin socket   This product is also...

Digitrax PX108-2 Power Xtender for PX Socket - 2-pin Micro JST Plug     The PX108 series power extender offers the same great features of other Digitrax Power extenders. The PX108 is offered in a shorter package while still providing...

Digitrax PX112-2 Power Xtender for PX Socket - 2-pin Micro JST Plug   Keeps locos & sound running during power interruptions caused by dirty or bad track. Hold up time varies based on decoder load & track conditions. PX112-2 Plug N Play...

ESU 50700 Passenger Car Lighting Kit - Warm White The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. We are offering two versions: The version with Part number 50700 is equipped with warmwhite LEDs, while...

ESU 50702 Passenger Car Lighting Kit - Yellow   The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars. We are offering two versions: The version with Part number 50700 is equipped with warmwhite LEDs,...

ESU 50704 Cabin Lighting Kit 1 LED - Warm-White   Small modules that can easily be installed either in cabs or as end-of-train lights make fitting protypical lighting of your vehicles a simple task. They provide one warmwhite LED or two red LEDs...

ESU 50705 Tail Light Lighting Kit 2 LED - Red   Small modules that can easily be installed either in cabs or as end-of-train lights make fitting protypical lighting of your vehicles a simple task. They provide one warmwhite LED or two red LEDs...

ESU 50707 LED Lighting Current Collector (Wheel Contact) for N & HO Cars (8 pcs)   Our current pick-ups (50707) provide optimal electrical contact in all commercially available coaches and are easy to install: simply glue them to the underside...

ESU 50708 Passenger Car Lighting Kit - Warm White - Digital Set   The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars that are going to be operated on digital model railroads. We are offering two...

ESU 50709 Passenger Car Lighting Kit - Yellow - Digital Set   The 255mm long, 9mm slim LED lighting strips with 11 LEDs are designed for N, TT and H0 gauge cars that are going to be operated on digital model railroads. We are offering two versions:...

ESU 50718 Passenger Car Lighting Kit - Warm White - Decoder Set With the digital LED interior lights from ESU, you can retrofit your N, TT or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit the desired...

ESU 50719 Passenger Car Lighting Kit - Yellow - Decoder Set With the digital LED interior lights from ESU, you can retrofit your N, TT or H0 gauge passenger cars with prototypical, uniform lighting. Two versions are available to suit the desired location...

ESU Wire Harness, Model Number 51950If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the...

ESU Wire Harness, Model Number 51951If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses 51950 resp. 51951: Solder in the harness and then plug in the...

ESU 51957 21-HW - 21MTC Adapter Board 3 w/ AUX 3, AUX 4, AUX 5 & AUX 6 - NEM660 21MTC Integral Connector     Dimensions:  15.5mm x 31mm x 7mm To Top Of Pins Our new adapter board 3 for decoders with 21MTC interface is best suited for...

ESU 51958 21-HW - PluX22 Adapter Board 1 - NEM658 PluX22 Integral Connector   Our new adapter board 3 for decoders with PluX22 interface is best suited for everyone intending to digitise a loco without interface but with many functions without...

ESU 51966 Change Over Ski for LokSound or LokPilot w/ 21MTC     Dimensions:  24mm x 43mm x 12.7mm To Top Of Pins   Many railcars are equipped with a grinder at both ends. For proper function in block locations and for timely stopping...

ESU 51967 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector     Dimensions:  17mm x 27.2mm x 7mm To Top Of Pins   The 21 MTC adapter board is suitable for digitising a loco without interface and for the case you do...

ESU 51968 21-HW - 21MTC Adapter Board w/ AUX 3, AUX 4, AUX 5 & AUX 6     Dimensions:  20mm x 40mm x 7mm To Top Of Pins   The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if...

ESU 51970 NEM660 21MTC Integral Connector I/O Expansion Board (4x AUX, 2x Servo, Smokeunit) for LokSound, LokPilot V4.0     Dimensions:  15.5mm x 30.3mm x 8.4mm To Top Of Pins   With this expansion board you can easily expand your...

ESU 51993 Wire Harness Adapter Board - 88mm - NEM662 Next18 Integral Connector to Hardwire   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our harnesses...

ESU 51994 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 6-pin NEM651   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51995 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NMRA 8-pin NEM652   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of...

ESU 51996 Adapter Board - NEM662 Next18 Integral Connector to NEM658 PluX16 Integral Connector   If the loco in question features no digital interface and you dont want to cut off the interface-plug of your loco, simply make use of one of our...

ESU 51997 Wire Harness Adapter Board - 88mm Flex Cable - NEM662 Next18 Integral Connector to NEM658 PluX12 Integral Connector   This adapter board can be docked to all decoders with Next18 connection and offers a PluX12 interface on the locomotive...

ESU 51998 Adapter Board - NEM662 Next18 Integral Connector to NEM660 21MTC Integral Connector     This small adapter board is a practical helper for equipping some models (e.g. from Liliput) with a LokSound decoder: A 21MTC interface was...

ESU 51999 Adapter Board - NEM662 Next18 Integral Connector to Hardwire   The Next18 adapter board is suitable if you want to digitize a very small locomotive without a digital interface, but do not want to freely wire the decoder. With dimensions...

ESU 53951 NEM660 21MTC Integral Connector to Hübner Schienenbus Adapter Board for LokSound or LokPilot Decoders     This adapter board is for owners of a Hübner railbus in track 1 (Art. No. 4070 or 4071) thought. There, a LokSound 2...

ESU 53956 Adapter Board - NEM662 Next18 Integral Connector to RCN114 14MTC Integral Connector Using this adapter board with the dimensions 13.5mm x 8.4mm, Minitrix® locomotives with MTC14 interface can finally be equipped with a LokSound decoder at...

Grizzly Mountain Engineering 4-point Sound Cam     Model Railroad Sound Cams   We are the number one manufacturer of Sound Cams for Model Railroad sound in the world.  Our cams work perfectly with through the rail style sound (GME,...

Grizzly Mountain Engineering 4-point Sound Cam     Model Railroad Sound Cams   We are the number one manufacturer of Sound Cams for Model Railroad sound in the world.  Our cams work perfectly with through the rail style sound (GME,...

Grizzly Mountain Engineering 4-point Sound Cam     Model Railroad Sound Cams   We are the number one manufacturer of Sound Cams for Model Railroad sound in the world.  Our cams work perfectly with through the rail style sound (GME,...

NCE Medium "No-Halt" DCC Decoder Stay-Alive Device - Hardwire   Dimensions: 2.14" x 0.640 x 0.400" (54 x 16 x 10 mm) High power version for larger locomotives - Eliminates or reduces the following due to dirty track or unwired switch...

NCE Small "No-Halt" DCC Decoder Stay-Alive Device - HardwireThe small no halt will allow a typical HO locomotive to travel up to 3 feet of dirty track and still operate the lights with NO FLICKER. Do not exceed DCC track voltage of 15v...

NixTrainz Decoder Buddy 12 Output V5B 2.2k Ohm Resistor 21-HW - 21MTC Adapter Board - NEM660 21MTC Integral Connector     Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple...

NixTrainz Decoder Buddy 8 Output Original 2.2k Ohm Resistor 21-HW - 21MTC Adapter Board - NEM660 21MTC Integral Connector     Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple...

NixTrainz Decoder Buddy Mini 1k Ohm Resistor 21-HW - 21MTC Adapter Board - NMRA-NEM660 21MTC Integral Connector   Decoder Buddy V5 and V5B The Decoder Buddy V5 and V5B were developed for the 12 output decoders and include a couple added features...

SoundTraxx 810068 Replacement Tsunami Speaker Harness, Steam - Hardwire - NMRA 3-pin JST Plug to Hardwire     Replacement 3-Wire to JST Speaker and Cam harness.   

SoundTraxx 810069 Replacement Tsunami Power Harness, Steam and Diesel - NMRA 9-pin JST to Hardwire     Replacement 9-wire to JST power harness for all TSU-2200 or ECO-200 Digital Sound Decoders.    

SoundTraxx 810132 DBX-9000 Locomotive-To-Tender Wiring Kit - NMRA 9-pin Micro JST Adapter Board to Hardwire     The DBX-9000 is a compact 9-wire connector and harness assembly for use with universal-style DCC decoders. It is designed to...

Soundtraxx 810135 Wire Harness - NMRA 9-pin JST to NEM652 8-pin Wired Plug     This harness easily converts TSU-2200 or ECO-200 Digital Sound Decoders to plug and play decoders for use with models equipped with an NMRA 8-pin socket.

SoundTraxx 810140 Tsunami Current Keeper - 2-pin Micro JST Plug     The SoundTraxx CurrentKeeper™ is designed to add additional power capacity to any decoder installation. It can be used to overcome dirty track, limited electrical pickup...

SoundTraxx 810156 Wire Harness, ECO-100/TSU-1100 8-Pin Power Harness - NMRA 8-pin Micro JST to Hardwire     Replacement 8-wire power harness for all TSU-1100 or ECO-100 Digital Sound Decoders.  

Soundtraxx 810157 Wire Harness, Econami/Tsunami2 4-Pin Speaker Harness - NMRA 4-pin Micro JST to Hardwire     Replacement 4-wire speaker and lighting harness for Tsunami2 and Econami Digital Sound Decoders.  

Soundtraxx 810158 CurrentKeeper Wire Harness - 2-Pin Micro JST to 2-Pin Micro JST     Easily connect a CurrentKeeper or extra capacitor to any SoundTraxx decoder equipped with a 2-pin "Quick Plug" to improve performance over dirty track and...

Soundtraxx 810159 JST-21PNEM Adapter Board - NMRA 9-Pin JST to NEM660 21MTC Integral Connector     Easily adapt any SoundTraxx 21PNEM decoder to an NMRA 9-Pin DCC "quick plug" equipped model. This adapter can also be used with SoundTraxx 9-Pin...

SoundTraxx 810160 Tsunami Compact Current Keeper II - 2-pin Micro JST Plug     Not all models are made the same, and some are a TIGHT fit for a decoder installation. The CurrentKeeper is now available in two sizes to fit more models and make...

SoundTraxx 810163 JST-Next18 Adapter Board - NEM662 Next18 Integral Connector to 7-Pin Micro JST with Hardwire Harness     This adapter allows you to use our smallest decoder (The TSU-N18) in practically any n-scale model! Bring the TSU-N18's 6...

TCS 1032 DCC Decoder VR1.5 Voltage Regulator - Hardwire     Never wire another resistor for 1.5v bulbs! The VR1.5 can be used with any decoder to supply a 1.5V regulated supply for all of your light bulbs.   To use the VR1.5, connect the...

TCS 1033 Wire Harness - T-WH - NMRA 9-pin JST to Hardwire     9-Pin JST for use with decoders that use a 9-Pin JST interface. Use this harness to connect any decoder with a 9-Pin JST connector to your locomotive. Examples of decoders with this...

TCS 1034 Wire Harness - MC-WH - 7-pin Micro JST to Hardwire     The MC-WH is a 7 pin JST connector designed for use with TCS MC-series decoders. The connector has 6" (15.24cm) long 32 AWG wires.    

TCS 1036 Wire Harness - C628 - 8-pin NMRA (NEM652) to 9-pin JST for C628     C628 is a harness for the C628/C630 for the T series.    

TCS 1037 Wire Harness - E6 - 8-pin NMRA (NEM652) to 9-pin JST for P2K E6     The E6 harness is designed to fit in the Life Like Proto 2000 E6 Locomotive.With special wiring for mars light.  Works with all T series decoders.  

TCS 1041 Wire Harness - P2K - 8-pin NMRA (NEM652) to 9-pin JST for P2K Engines     P2K is a T series harness for the Life Like Proto 2000 with a NMRA plug.  

TCS 1044 Wire Harness - UK-SH - Short 8-pin NMRA (NEM652) to 9-pin JST for UK Style     UK-SH is a Short United Kingdom harness for the T series. 

TCS 1046 Wire Harness - T-VO - 2.5cm 8-pin NMRA (NEM652) to 9-pin JST for VO-1000     T-VO is a T series harness for the VO-1000 and most other Stewart locomotives.    

TCS 1051 Wire Harness - MC-VO - 2.5cm 8-pin NMRA (NEM652) to 7-pin Micro JST for VO-1000     MC-VO is a harness with a NMRA plug for the VO-1000 and many other Stewart loco's for the MC series.    

TCS 1054 Wire Harness - MC-S1 - 2.5cm 8-pin NMRA (NEM652) to 7-pin Micro JST for Life-Like S1 Switcher     MC-S1 is a MC series harness with a NMRA plug for the Life Like S1 Switcher.    

TCS 1186 Wire Harness - C628H - 8-pin NMRA (NEM652) to 9-pin JST for Stewart C628H-C630H     C628-H is harness for the C628-H/C630-H for the T series.   

TCS 1187 Wire Harness - MC-C628-630 - 2.5cm 8-pin NMRA (NEM652) to 7-pin Micro JST for Stewart C628 and C630     MC-C628/C630 is a MC series harness for the Stewart C628 and C630 with a NMRA plug.    

TCS 1195 Wire Harness - E7 - 8-pin NMRA (NEM652) to 9-pin JST for P2K E7     This E7 harness is designed for Life Like Proto 2000 E7 loco. With special wiring for the Mars light. Works with all T series decoders.  

TCS 1253 8-pin NMRA (NEM652) Socket     8 pin NMRA socket, premade and ready for wires to be soldered on   Can also be used as an extension plug for the DP5 and DP2X decoders.  

TCS 1254 8-pin NMRA (NEM652) Plug 8 pin NMRA plug, pre-made and ready for wires to be soldered on from a decoder/etc. Can be plugged into any locomotive with an 8-pin connector. NOTE: This product does not include wires.    

TCS 1255 8-pin NMRA (NEM652) Plug Kit     All the pieces you need to put together a 8 pin NMRA plug.  

TCS 1260 9-Pin JST Connector     9-pin micro-JST surface mount female connector - used on the T series of decoders.  

TCS 1345 9-Pin JST Extension Plug with 6" Wire Leads (5pk)     9-Pin JST extension plug equipped with 6" function wires.   Great to use with sound decoders as well as with other DCC products. This is a 5 Pack.  

TCS 1352 Wire Harness - T-1-21 - 2.5cm NEM660 21MTC to 9-pin JST     The T-1"-21 is an adapter harness with 1" (2.54 cm) wires used for connecting a 9-Pin JST to a 21-Pin motherboard. 9-Pin JST decoders such as the WOW101, T1,...

TCS 1353 Wire Harness - T-3.5-21 - 8.9cm NEM660 21MTC to 9-pin JST     The T-3.5"-21 is an adapter harness with 3.5" (8.89 cm) wires used for connecting a 9-Pin JST to a 21-Pin motherboard. 9-Pin JST decoders such as the WOW101, T1,...

TCS 1354 Wire Harness - T-5-21 - 12.7cm NEM660 21MTC to 9-pin JST     The T-5"-21 is an adapter harness with 5" (12.7 cm) wires used for connecting a 9-Pin JST to a 21-Pin motherboard. 9-Pin JST decoders such as the WOW101, T1,...

TCS 1355 Wire Harness - MC-1-21 - 2.5cm NEM660 21MTC to 7-pin Micro JST     The MC-1"-21 is an adapter harness with 1" (2.54 cm) wires used for connecting a 7-Pin JST to a 21-Pin motherboard. 7-Pin JST decoders such as the MC2 and MC4 may be...

TCS 1356 Wire Harness - MC-3.5-21 - 8.9cm NEM660 21MTC to 7-pin Micro JST     The MC-3.5"-21 is an adapter harness with 3.5" (8.89 cm) wires used for connecting a 7-Pin JST to a 21-Pin motherboard. 7-Pin JST decoders such as the MC2 and MC4 may...

TCS 1357 Wire Harness - MC-5-21 - 12.7cm NEM660 21MTC to 7-pin Micro JST     The MC-5"-21 is an adapter harness with 5" (12.7cm) wires used for connecting a 7-Pin JST to a 21-Pin motherboard. 7-Pin JST decoders such as the MC2 and MC4 may be...

TCS 1358 21-HW - 21MTC Adapter Board (5-pk) - NEM660 21MTC to Hardwire     The 21-HW (female) is a circuit board with a 21-pin NEM660 (MTC21) socket and solder pads to connect wires. The female 21-pin socket may be used to adapt a harnessed...

TCS 1359 Wire Harness - T-1 - 2.5cm 8-pin NMRA (NEM652) to 9-pin JST     T-1" is a 1 in. T series harness.    

TCS 1360 Wire Harness - T-1R - 2.5cm 8-pin NMRA (NEM652) to 9-pin JST Reversed     T-1"R is a 1" T series harness with a 8 NMRA plug rotated 180 degrees.  

TCS 1361 Wire Harness - T-3.5 - 88.9cm 8-pin NMRA (NEM652) to 9-pin JST     T-3.5" is a 3.5" harness for the T series with a NMRA plug.      

TCS 1362 Wire Harness - T-3.5R - 8.9cm 8-pin NMRA (NEM652) to 9-pin JST Reversed     T-3.5"R is a 3.5" T series harness with a 8 NMRA plug rotated 180 degrees.  

TCS 1363 Wire Harness - T-5 - 125cm 8-pin NMRA (NEM652) to 9-pin JST     T-5" is a 5 in. T series harness.   

TCS 1364 Wire Harness - T-5R - 12.5cm 8-pin NMRA (NEM652) to 9-pin JST Reversed     T-5"R is a 5" T series harness with a 8 NMRA plug rotated 180 degrees.  

TCS 1365 Wire Harness - T-3.5-UK - 8.9cm 8-pin NMRA (NEM652) to 9-pin JST UK-Style     The T-3.5"-UK is a 3.5" United Kingdom harness for the T series.  

TCS 1366 Wire Harness - MC-1 - 2.5cm 8-pin NMRA (NEM652) to 7-pin Micro JST     MC-1" is a 1" or 25 mm harness with a 8 pin NMRA plug for the MC series of decoders.    

TCS 1367 Wire Harness - MC-3.5 - 88.9cm 8-pin NMRA (NEM652) to 7-pin Micro JST     MC-3.5" is a 3.5"or 75 mm harness with a 8 pin NMRA plug for MC series decoders.  

TCS 1368 Wire Harness - MC-3.5R - 88.9cm 8-pin NMRA (NEM652) to 7-pin Micro JST Reversed     MC-3.5"R is a 3.5" or 75 mm MC series harness with a 8 pin NMRA plug which is rotated 180 degrees.  

TCS 1369 Wire Harness - MC-5 - 125cm 8-pin NMRA (NEM652) to 7-pin Micro JST     MC-5" is a 5" or 125 mm Harness with a 8 pin NMRA plug for the MC series decoders.  

TCS 1370 Wire Harness - MC-5R - 125cm 8-pin NMRA (NEM652) to 7-pin Micro JST Reversed     MC-5"R is a 5" or 125 mm MC series harness with a 8 pin NMRA plug which is rotated 180 degrees.  

TCS 1371 Wire Harness - MC-3.5UK - 88.9cm 8-pin NMRA (NEM652) to 7-pin Micro JST Rotated     MC-3.5" - UK is a 3.5" or 75 mm United Kingdom wired harness with a 8 pin NMRA plug for MC series decoders.    

TCS 1374 9-pin JST Female Socket - Hardwire Adapter Board (5-pk)     The 9-Pin JST Female Socket may be used in conjunction with a 9-pin JST Male Harness. The board has 9 solder pads for easy wiring to locomotive components or a decoder. If you...

TCS 1398 Wire Harness - MC-1R - 2.5cm 8-pin NMRA (NEM652) to 7-pin Micro JST Reversed     MC-1" R is a 1" or 25 mm MC series harness with a 8 pin NMRA plug which is rotated 180 degrees.    

TCS 1454 KA1 DCC Decoder Keep-Alive Device - Hardwire TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. Newly-redesigned and coming in at half the size...

TCS 1455 KA1-C DCC Decoder Keep-Alive Device - 2-pin Mini ConnectorTCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned and coming in...

TCS 1456 KA2 DCC Decoder Keep-Alive Device - Hardwire TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work. Newly-redesigned at half the size of a KA4, the...

TCS 1457 KA2-C DCC Decoder Keep-Alive Device - 2-pin Mini ConnectorTCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.  Newly-redesigned at half the...

TCS 1653 21-HW - 21MTC Adapter Board (5-pk) - NEM660 21MTC to Hardwire     The 21-HWM (21-pin HardWire Male) is a circuit board with a 21-pin NEM660 (MTC21) connector and solder pads to connect wires. The male 21-pin socket may be used with...

TCS 1664 Wire Harness - JST-WH - 6-Pin Micro JST Harness For InterMountain\Bowser MBThis 6-pin JST connector is used to connect lighting functions to our Intermountain/Bowser motherboards. Some of the motherboards we provide have 6-Pin JST connectors for...