Distributed by SBS4DCC.com
Bowser 1294 "Sugar Cube"-style Speaker Dual 11x15mm 4 ohm 2 watt w/ Sound Chamber
- MPN:
- 691-1294
- Condition:
- New
Description
Bowser 1294 "Sugar Cube"-style Speaker Dual 11x15mm 4 ohm 2 watt w/ Sound Chamber
- 17.5 x 25.5 x 6.7 mm
- 4 ohm
- 2 Watts
- Sound Chamber Included
- Great for low hood diesels and small steam locos
- Speaker with two 11x15mm (4/5 Ohm impedance) sugar cube speakers installed with wire
- Four mounting tabs
The speaker is suitable for use with all LokSound decoders.
The speaker is also suitable for use with many ZIMO and other brands of sound decoders. Check the decoder specifications before installation.
NOTE:
This product ships with two pair of leads with connectors; a micro JST and, for lack of a better description, a nano JST.
Checking them with a meter, they both read 4 ohms and I have continuity between them. My assessment is the leads are wired in parallel and they are intended to be used “either or”. In any installation example where the advertised 4 ohms is desired , you will only use one pair of leads. Simply ignore the unused connector or remove the unused leads.
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS: |
Standard (HO-S-O*) |
SPEAKER TYPE: |
"Sugar Cube" |
SPEAKER INTERFACE: |
2-Pin Micro JST* |
SIZE-INCH (L x W x H): |
1.00 x 0.69 x 0.27 in |
SIZE-METRIC (L x W x H): |
25.5 x 17.5 x 6.7 mm |
NUMBER OF SPEAKERS: |
2 |
MAX POWER: |
2 W |
FREQ RESPONSE RANGE: |
0 Hz - 0 kHz |
IMPEDANCE: |
4 Ohms |
SOUND LEVEL (W/O CHAMBER): |
0 db** |
ENCLOSURE INCLUDED: |
Yes |
ASSEMBLY REQUIRED: |
Yes |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
* - Alternate 2-Pin Nano JST, both on 2" Single Wire Harness |
NOTES (2): |
** - sound level per speaker |