Description
Digitrax AR1 Auto Reversing Controller
The easiest most cost effective way to add automatic reversing to one section of your DCC layout.
AR1 Features:
-
Cost effective automatic reversing for one reversing section or subdistrict
-
User selectable trip current lets you adjust the AR1 to work with any scale or equipment on your layout
-
Auto-Reversing manages polarity mismatches on the reversing track section without manually throwing electrical toggle switches or adding another booster
-
8 amp peak, 6 amp continuous Auto-reversing control for a single reversing district.
-
Simple to wire 4 wire hookup, no locomotive wiring required
-
No external power required, runs off track power
-
AR1 operates with or without LocoNet, so it is compatible with all DCC systems.
Alternatives to AR1 for Automatic Reversing on your layout:
1. Use a double pole, double throw switch to manually allow for reversing.
2. Use one Digitrax booster set for automatic reversing and another set for normal operation.
3. Use a PM42 Quad Power Manager to handle 4 power sub-districts. You can set these up to be automatic reversing or power managers to prevent short circuits from shutting down your layout.
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
All Scales |
DECODER TYPE: |
Accessory - Auto Reverser |
DECODER INTERFACE (PRIMARY): |
Screw Terminal |
DECODER INTERFACE (SECONDARY): |
NA |
SIZE-INCH (L x W x H): |
0 x 0 x 0 in |
SIZE-METRIC (L x W x H): |
0 x 0 x 0 mm |
FUNCTION CURRENT: |
8A each |
TRACK SECTION INPUT-OUTPUT: |
1 |
CIRCUIT BREAKER: |
NO |
AUTO REVERSER: |
YES |
OCCUPANCY DETECTION: |
NO |
FUNCTION CONTROL INPUTS: |
0 |
SWITCH MOTOR FUNCTION OUTPUTS: |
0 |
STATIONARY - SIGNAL LIGHTING FUNCTION OUTPUTS: |
0 |
SWITCH MOTOR TYPE - STALL MOTOR (TORTOISE SLOW-MOTION): |
NA |
SWITCH MOTOR TYPE - TWIN COIL SOLENOID (ATLAS SNAP): |
NA |
SWITCH MOTOR TYPE - BI-POLAR SOLENOID (KATO-PIKO-LGB): |
NA |
SWITCH MOTOR TYPE - SERVO MOTOR: |
NA |
PROTOCOL: |
LocoNet |
BI-DIRECTIONAL COMMUNICATION: |
NA |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
NA |
NOTES (2): |
NA |