Digitrax
Digitrax BXPA1 LocoNet DCC Auto-Reverser with Detection, Transponding and Power Management
- UPC:
- 652667110150
- MPN:
- BX-BXPA1
- Condition:
- New
Save More With Volume Discountsā¦
Buy 5 - 9 | $62.58 each |
Buy 10 or above | $60.67 each |
Description
Digitrax BXPA1 LocoNet DCC Auto-Reverser with Detection, Transponding and Power Management
The BXPA1 is a combination DCC Auto-Revereser, occupancy detector, Transponding detector, and intelligent power manager. It is designed to make transponding implementation easy and provide advanced DCC track management by communicating all state information to LocoNet. The BXPA1 is silent solid state and uses no mechanical relays for auto-reversing.
- Automatic reversing for one reversing section or sub-district.
- DCC Occupancy Detection for 1 Auto-Reversing Section letting you know when equipped rolling stock is in a detection section on your layout.
- Integrated Transponding Zone lets you know the location of transponder-equipped locos or rolling stock.
- Intelligent Automatic short-circuit and over-current power management, improves reliability by avoiding most booster shutdowns.
- Connects to LocoNet to transmit Detection Section occupancy, Transponding and track power information.
- Detects most powered locomotives in a Detection Section.
- Detects rolling stock equipped with resistor wheel sets.
- Identify where specific rolling stock is on your layout with Digitrax transponder-equipped locos and rolling stock.
- Plug and Play with Digitrax DCC systems.
- LED indication of Detection Section occupancy, Transponding, power status, and reversing section status.
- Additional connections for opto-isolated occupancy detector output, manual power control, and remote status indicator.
- Easy-connect pluggable track wire terminal blocks can plug-in straight or at right angles.
- Operations Mode Read Back allows you to read CV values of decoders equipped with transponders when on track.
- Firmware update capability via IPL over LocoNet.
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
All Scales |
DECODER TYPE: |
Accessory - Multi-function |
DECODER INTERFACE (PRIMARY): |
Screw Terminal |
DECODER INTERFACE (SECONDARY): |
NA |
SIZE-INCH (L x W x H): |
0 x 0 x 0 in |
SIZE-METRIC (L x W x H): |
0 x 0 x 0 mm |
FUNCTION CURRENT: |
3A each |
TRACK SECTION INPUT-OUTPUT: |
1 |
CIRCUIT BREAKER: |
YES |
AUTO REVERSER: |
YES |
OCCUPANCY DETECTION: |
YES |
FUNCTION CONTROL INPUTS: |
0 |
SWITCH MOTOR FUNCTION OUTPUTS: |
0 |
STATIONARY - SIGNAL LIGHTING FUNCTION OUTPUTS: |
0 |
SWITCH MOTOR TYPE - STALL MOTOR (TORTOISE SLOW-MOTION): |
NA |
SWITCH MOTOR TYPE - TWIN COIL SOLENOID (ATLAS SNAP): |
NA |
SWITCH MOTOR TYPE - BI-POLAR SOLENOID (KATO-PIKO-LGB): |
NA |
SWITCH MOTOR TYPE - SERVO MOTOR: |
NA |
PROTOCOL: |
LocoNet |
BI-DIRECTIONAL COMMUNICATION: |
Transponding |
ADDITIONAL FEATURES: |
Multi-function device including 1x circuit breaker, auto reverse and occupancy detection positions |
NOTES (1): |
NA |
NOTES (2): |
NA |