Digitrax DCS240+ LocoNet Advanced Command Station

DCS240+ LocoNet® Advanced Command Station

More Locos, More Capacity, Really Big Fun!

The DCS240+ Advanced Command Station lets your LocoNet® System run up to 400 locos and 400 throttles. Full read/write programming, route capability, USB connectivity, and separate programming output lets you run and program at the same time.

Features:

• Supports up to 400 locomotives and throttles.
• On-board USB port.
• Three RJ12 LocoNet ports
• Supports SoundFX and sound decoder programming using Digitrax SoundLoader app over USB.
• 5amp/8amp Booster with multi-scale capability.
• Built-in booster transponding detection provides Operations mode CV read back.
• Locomotive reset button.
• EZ route setup button and system editable routes.
• Improved Programming track.
• Updated design.

Additional Features:

• Direct USB connection for easy computer interface
• Automatic CS collision detection via LocoNet. Layouts can have only one CS!
• Continuous F0-28 refresh support
• Transponding detection support on Local booster tracks
• Improved Program Track output with automatic support for Power Extender equipped locos
• All storage is in non-volatile memory, no battery changes required!
• User selectable multi-scale operation for Z, N, HO, and large-scale layouts
• Electronic Non-Volatile track voltage customization for each scale setting

In addition to your DCS240+ you’ll need:

• A DC 13.8V to 24V power supply with 5 or 8 amp capability. You may be able to use an existing DC supply if it supplies sufficient current and suitable DC voltage for the scale setting in use; typical N scale = 13.8V, HO = 15.8V and G scale = 23V.
• A Digitrax Throttle
• One or more mobile decoders for your locomotives.