REQUEST A QUOTE  -  STREAMLINED BACKSHOP INSTALLATIONS AND REPAIRS  -  MORE INFO 
ESU - Electronic Solutions Ulm

ESU 50094 ECoS Detector Feedback Module - 2 and 3 Rail Operation with RailCom

(No reviews yet) Write a Review
UPC:
404464550094
MPN:
50094
Condition:
New
  • ESU 50094 ECoS Detector Feedback Module - 2 and 3 Rail Operation with RailCom
  • ESU 50094 ECoS Detector Feedback Module - 2 and 3 Rail Operation with RailCom
  • ESU 50094 ECoS Detector Feedback Module - 2 and 3 Rail Operation with RailCom
MSRP: AUD $400.99
Price: AUD $300.75
— You save AUD $100.24

Description

ESU 50094 ECoS Detector Feedback Module - 2 and 3 Rail Operation with RailCom

 

Our ECoSDetector feedback modules should be used to automate train operations. Beside the usual track occupancy detection, the train specific identification number can be read. It also enables the implementation of an external track control board.

Our ECoSDetector feedback modules should be used to automate train operations. Beside the usual track occupancy detection, the train specific identification number can be read. It also enables the implementation of an external track control board.

On larger layouts, the operator would want to determine the actual position of locos and trains. With the knowledge of which track section is currently occupied or of which track is still free in the hidden yard, an automated operation is made possible.

The ECoSDetector is compatible with all ECoS command stations or Central Station®s (providing the Central Station® has been updated with the Central Station® upgrade software) and is able to detect up to 16 track sections. Two-rail or three-rail tracks can be directly connected to the module. Beside the 16 track occupancy detectors or feedback sections, each ECoSDetector can also detect a locomotive ID on up to four track sections, providing that RailCom® decoders are used. If desired, the ECoSDetector functionality can be extended with the ECoSDetector Extension module. When docked to the side of the ECoSDetector, if offers up to 32 outputs, each displaying the status of the track sections with a control light or driving a suitable block signal.
 

Detection and feedback

The ECoSDetector is able to monitor up to 16 track sections and reports the presence of a loco (track occupancy). Each of the 16 inputs has a maximum current capability of 3A. The ECoSDetector module also has two separate power inputs, and can be supplied from two separate Booster units.
Opto-couplers are used to provide a reliable detection. Two or three rail operation is easily selected through jumpers.
 

Input devices

Up to 16 regular switching devices can also be used as inputs. Reed switches, detection track sections, push buttons or toggle switches can all be connected to the inputs. The information is then processed in the command station.

 

Train ID detection

Beside conventional track occupancy detection, each ECoSDetector has the additional ability to monitor four of the 16 track sections for train identification: Via the RailCom® technique (so-called local detectors) you will not only easily find out that theres currently a loco on this track section, but also identify which specific loco it is (train ID detection). However, this only works with RailCom®-compatible loco decoders.

 

Smart

With the knowledge of the train specific position, new functions can be implemented, using the route control module of the ECoS command station. For example, you can automatically activate the horn of a loco when it is about to pass a railway crossing or determine which loco is parked in the hidden yard.
It is also possible to de-bounce switch inputs or track occupancy detectors electronically to ensure a reliable feedback  in case of unreliable contact or very dirty tracks.

 

ECoSlink connection

Every ECoSDetector can be directly connected to the command station via the ECoSlink bus. Beside all ECoS command stations you can also use the Central Station® (updated with the Central Station® with software upgrade by ESU) The galvanic isolation of the bus systems and the command station guarantees the best-possible reliable operation and a reliable data transmission to the command station.
All ECoSDetector modules will be detected automatically by the command station and the information integrated in the operation control routine. The configuration of the devices can be also carried out directly with the command station after installation.

 

Upgradeable

When needed, the ECoSDetector software can be upgraded to add new functionalities. The command station will perform the required updates completely automatically. This will guarantee at all times that the ECoSDetector remains at the most current technical status.

 

Technical Data:

  ECoSDetector
Operational modes: Direct bus connection to ECoSlink. Operation with ECoS or Central Station Reloaded V3.0.0. is possible.
Feedback section: 16 feedback modules.
  Configurable by using jumpers as digital inputs (e.g. for contact tracks or reed switches) or as track occupancy detectors (current sensor).
  Galvanical isolation of feedback modules and command station
  Max. 3A current load per feedback input
RailCom®: 4 of 16 feedback sections can be used as RailCom feedback sections ("local detector"), if desired. Recognition of loco address
Dimensions: 86mm x 86mm x 25mm (3.39 x 3.39 x 0.98 inch)
Included in delivery: ECoSDetector feedback module, terminals, ECoSlink bus connection cable, extensive instruction manual
   
  ECoSDetector Standard
Operational modes: Directly connected to ECoSlink bus. Operation with ECoS command station and Central Station Reloaded V3.0.0 possible.
Feedback section: 16 feedback modules as digital inputs (e.g. for contact tracks or reed switches). Galvanical isolation of feedback modules and command station.
Dimensions: 86mm x 86mm x 25mm (3.39 x 3.39 x 0.98 inch)
Included in delivery: ECoSDetector Standard feedback module, terminals, ECoSlink bus connection cable, extensive instruction manual
   
  ECoSDetector RC
Operational modes: Directly connected to ECoSlink bus. Operation with ECoS command station and Central Station Reloaded V3.0.0 possible.
Feedback section: 4 feedback inputs configured as track occupancy detectors (current sensor). Galvanical isolation of feedback modules and command station.
RailCom®: 4 feedback sections can be used as RailCom feedback sections ("local detector"). Recognition of loco address
Dimensions: 86mm x 86mm x 25mm (3.39 x 3.39 x 0.98 inch)
Included in delivery: ECoSDetector RC feedback module, terminals, ECoSlink bus connection cable, extensive instruction manual
   
  ECoSDetector Extension
Operational modes: Extension module for ECoSDector, is powered and controlled by it. Transistor outputs are powered externally.
Outputs: 32 transistor outputs, 100mA output load each. Construction as open collector is connected to ground
  Total current of all outputs is max. 1.5A
Dimensions: 86mm x 86mm x 25mm (3.39 x 3.39 x 0.98 inch)
Included in delivery: ECoSDetector Extension module, terminals, extensive instruction manual

 

 

View AllClose

Additional Resources

MANUFACTURERS WEBSITE:
https://www.esu.eu/en/products/digital-control/ecosdetector/ecosdetector/
SOUND CONFIGURATION & SOUND FILE RESOURCES:
http://projects.esu.eu/
FIRMWARE & SOFTWARE RESOURCES:
https://www.esu.eu/en/downloads/software/
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES:
https://www.esu.eu/en/downloads/instruction-manuals/
MANUFACTURERS WARRANTY & REPAIRS:
https://www.esu.eu/en/support/warranty-repair/
ADDITIONAL INFORMATION - DCC TIPS:
https://sbs4dcc.com/pages/dcc-tips.html
ADDITIONAL INFORMATION (1):
https://www.esu.eu/en/downloads/software/lokprogrammer/
ADDITIONAL INFORMATION (2):
https://sbs4dcc.com/pages/products-services/sbs4dcc-dccsound-usa-esu-custom-sound-files-by-phil-dunlop.html
View AllClose

Additional Information

PRODUCT CLASS :
All Scales
SIZE-INCH (L x W x H):
0 x 0 x 0 in
SIZE-METRIC (L x W x H):
0 x 0 x 0 mm
ADDITIONAL FEATURES:
NA
NOTES (1):
NA
NOTES (2):
NA
View AllClose
< PREV NEXT >

Related Products