ESU - Electronic Solutions Ulm
ESU 51801 SwitchPilot DCC Accessory Decoder Extension V1.0
- UPC:
- 404464551801
- MPN:
- 51801
- Condition:
- New
Save More With Volume Discounts…
Buy 5 - 9 | $24.19 each |
Buy 10 or above | $23.45 each |
Description
ESU SwitchPilot Extension, Model Number 51801
If required, SwitchPilot can be augmented with the SwitchPilot Extension Modul: Plugged in at the side of the SwitchPilot, it offers four relay-driven outputs, used for switching potential-free loads, or for polarizing the frog; the ideal supplement for tricky circuitry.
Modes of operation
The SwitchPilot Extension Modul only works in conjunction with a SwitchPilot. Plugged in at the side, it gets its electrical power directly from the SwitchPilot. It contains a total of 4 Twin-Relays (2 x DPDT), of which each is dedicated to a pair of transistorized SwitchPilot outputs.
The respective relay’s switch position is directly dependent upon the state of this pair of outputs. With the relay’s help, loads can be switched, galvanically separated from the rest of the track (it functions like a k84), or a motorized turnout can be polarized.
With the relay’s 1.5 Amp continuous rating, either frogs can be polarized-, or blocks powered signal dependent, or motorized devices, such as (water) pumps may be switched. Especially intricate is the option to control motorized turnouts: Of course the SwitchPilot Extension Module easily handles the necessary motor polarization as well.
The respective relay’s switch position is directly dependent upon the state of this pair of outputs. With the relay’s help, loads can be switched, galvanically separated from the rest of the track (it functions like a k84), or a motorized turnout can be polarized.
With the relay’s 1.5 Amp continuous rating, either frogs can be polarized-, or blocks powered signal dependent, or motorized devices, such as (water) pumps may be switched. Especially intricate is the option to control motorized turnouts: Of course the SwitchPilot Extension Module easily handles the necessary motor polarization as well.
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
All Scales |
DECODER TYPE: |
Accessory - Switch |
DECODER INTERFACE (PRIMARY): |
Screw Terminal |
DECODER INTERFACE (SECONDARY): |
NA |
SIZE-INCH (L x W x H): |
3.74 x 3.35 x 0.87 in |
SIZE-METRIC (L x W x H): |
95 x 85 x 22 mm |
FUNCTION CURRENT: |
1.5 A continuous |
TRACK SECTION INPUT-OUTPUT: |
0 |
CIRCUIT BREAKER: |
NA |
AUTO REVERSER: |
NA |
OCCUPANCY DETECTION: |
NA |
FUNCTION CONTROL INPUTS: |
4* |
SWITCH MOTOR FUNCTION OUTPUTS: |
4* |
STATIONARY - SIGNAL LIGHTING FUNCTION OUTPUTS: |
8* |
SWITCH MOTOR TYPE - STALL MOTOR (TORTOISE SLOW-MOTION): |
YES |
SWITCH MOTOR TYPE - TWIN COIL SOLENOID (ATLAS SNAP): |
NO |
SWITCH MOTOR TYPE - BI-POLAR SOLENOID (KATO-PIKO-LGB): |
YES |
SWITCH MOTOR TYPE - SERVO MOTOR: |
NO |
PROTOCOL: |
NA |
BI-DIRECTIONAL COMMUNICATION: |
RailCom |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
* Optional 4x2 DPDT Switching Relay Output Board for 51830 SwitchPilot and 51831 SwitchPilot Plus |
NOTES (2): |
NA |