ESU - Electronic Solutions Ulm
ESU 51968 21-HW - 21MTC Adapter Board w/ AUX 3, AUX 4, AUX 5 & AUX 6 - NEM660 21MTC Integral Connector
- UPC:
- 404464551968
- MPN:
- 51968
- Condition:
- New
Description
ESU 51968 21-HW - 21MTC Adapter Board w/ AUX 3, AUX 4, AUX 5 & AUX 6
Dimensions: 20mm x 40mm x 7mm To Top Of Pins
The 21 MTC adapter board 2 is also suitable for digitising a loco without interface. It is very helpful, if you do not intend to wire the decoder freely or if you wish to use more than four function outputs on your LokPilot or LokSound decoder. This adapter board simulates the typcial size and shape of Märklin® 6090x-decoders and can be installed in every suitable position.
Decoders with 21MTC connectors (ESU LokPilot or LokSound favoured) are simply plugged onto the adapter board.
On the output side, the adapter offers already soldered cables (appr. 20cm length) for all contacts needed. Thus the wiring of your loco is child´s play. There are amplifiers (appr. 250mA each) for function AUX3 and AUX4 (the decoder´s logical outputs) so that ESU decoders have up to 6 available physical function outputs.
Dimensions: Length 35.5mm x 20.0mm (With mounting tab: 40.5mm x 20.0mm)
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
Standard (HO-S-O*) |
DECODER TYPE: |
Adapter Board |
DECODER INTERFACE (PRIMARY): |
Hardwire - Single Wires + Solder Pads |
DECODER INTERFACE (SECONDARY): |
NEM660 - 21MTC |
SIZE-INCH (L x W x H): |
1.61 x 0.8 x 0.28 in |
SIZE-METRIC (L x W x H): |
40.8 x 20.3 x 7.1 mm |
MOTOR CURRENT (CONTINUOUS): |
NA |
FUNCTION CURRENT (MAX): |
NA |
NORMAL OUTPUT FUNCTIONS: |
8 |
KEEP-ALIVE INTERFACE: |
Hardwire - Solder Pad** |
KA INPUT VOLTAGE (MAX): |
NA |
KA TOTAL CAPACITANCE: |
NA |
SPEAKER INTERFACE: |
Hardwire - Solder Pad |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
** - Optional 2 or 3 wire KA interface |
NOTES (2): |
NA |