REQUEST A QUOTE  -  STREAMLINED BACKSHOP INSTALLATIONS AND REPAIRS  -  MORE INFO 
ESU - Electronic Solutions Ulm

ESU 59120 LokPilot 5 FX Micro NMRA DCC Function-Only Decoder - NEM652 8-pin Wired Plug

(No reviews yet) Write a Review
UPC:
404464559120
MPN:
59120
Condition:
New

Save More With Volume Discounts…

Buy 5 - 9 $29.71 each
Buy 10 or above $28.80 each
  • ESU 59120 LokPilot 5 FX Micro NMRA DCC Function-Only Decoder - NEM652 8-pin Wired Plug
  • ESU 59120 LokPilot 5 FX Micro NMRA DCC Function-Only Decoder - NEM652 8-pin Wired Plug
MSRP: $37.90
Price: $30.32
— You save $7.58

Description

ESU 59120 LokPilot 5 FX Micro NMRA DCC Function-Only Decoder - NEM652 8-pin Wired Plug
 

LokPilot Fx dcc decoders provide function control for lighting effects, and in some cases they even provide sound output, just like their full featured siblings loksound and lokpilot but lokfunction decoders do not posess any capability to control a dc motor.

They are perfect for use in "dummy", non-powered locomotives and rolling stock like passenger cars and cabeese where it is desirable to have lots of lights to turn on and off, to have diesel engine or generator sounds, but where there is no need to provide power or speed control to operate a dc motor.


 
The LokPilot 5 Fx micro and its “twin” LokPilot 5 Fx micro DCC is an extremely small function decoderwith a footprint of only 8.0mm x 7.0mm and a thickness of only 2.4mm (on the capacitor:2.9 mm). It is used in all vehicles of nominal sizes N to H0 that do not need a motor output, but should still be able to switch lighting effects.LokPilot 5 Fx micro decoders are always offered with an 8-pin interface.

Modes

The LokPilot 5 Fx DCC “only” speaks the DCC protocol, but can also do it automatically with RailComPlus®On RailComPlus command stations.The LokPilot 5 Fx micro decoder recognizes the Märklin® braking distances as well as the ZIMO® HLU / ZACKCommands or the Lenz® ABC system. Also braking with DCC brake modules or with DC voltageis possible. It also stops with a Selectrix® brake diode. An ABC automatic shuttle trainenables automatic commuting between two train stations. This is also witha function decoder is important in order to be able to synchronize control cars and motor vehicles.The LokPilot 5 Fx decoder can be used on analog DC railways.The decoder switches between the operating modes fully automatically "on-the-fly".

Features

The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. There are 6 amplified function outputs with 180mA output current each and two logic level outputs for servos or Susi. The brightness of each output can be adjusted separately.

Operational safety

If required, a PowerPack can be connected to the LokPilot 5 Fx micro and LokPilot 5 Fx micro DCC to bridge dirty rail sections.

Protection

Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.

Decoder Specifications:

  • Size: 8.0 mm x 7.0 mm x 2.4 mm  (0.32 in x 0.28 in x 0.10 in)
  • Interface: NEM652 8-pin Wired Plug
  • Functions:  6 amplified outputs for special functions, 2 Logic-level outputs, 2 Optional Servo Outputs (total: Up to 8 outputs)
  • Protocol: DCC with RailComPlus®
  • Additional Features:
    • Updatable with ESU-LokProgrammer
    • Connection interface for RC servos and SUSI modules
    • Optional optional PowerPack storage capacitor connections
Interface
  • NEM652 8-pin Wired Plug

 

View AllClose

Additional Resources

View AllClose

Additional Information

PRODUCT CLASS :
Nano (Z-N-HO*)
DECODER TYPE:
Function Only
DECODER INTERFACE (PRIMARY):
NEM652 - NMRA 8-pin
DECODER INTERFACE (SECONDARY):
NA
SIZE-INCH (L x W x H):
0.31 x 0.28 x 0.09 in
SIZE-METRIC (L x W x H):
8 x 7 x 2.4 mm
MOTOR CURRENT (CONTINUOUS):
NA
MOTOR CURRENT (PEAK):
NA
FUNCTION CURRENT (MAX):
180mA each
NORMAL OUTPUT FUNCTIONS:
6
LOGIC-LEVEL FUNCTIONS:
2*
SERVO OUTPUT FUNCTIONS:
2*
FUNCTION INPUTS:
0
KEEP-ALIVE INTERFACE:
Hardwire - Solder Pad**
KA INPUT VOLTAGE (MAX):
NA
KA TOTAL CAPACITANCE:
NA
CV PROGRAMMING:
Service Mode + P.O.M.
FIRMWARE UPDATE:
Yes - LokProgrammer required
PROTOCOL:
NMRA DCC
BI-DIRECTIONAL COMMUNICATION:
RailCom Plus
ADDITIONAL FEATURES:
NA
NOTES (1):
* - Optional configuration - see manual
NOTES (2):
** - Optional 2 or 3 wire KA interface
View AllClose