REQUEST A QUOTE  -  STREAMLINED BACKSHOP INSTALLATIONS AND REPAIRS  -  MORE INFO 
ESU - Electronic Solutions Ulm

ESU 59219 LokPilot 5 Fx Standard Multi-protocol (DCC/MM/SX/M4) Function-Only Decoder - NEM660 21MTC Integral Connector

(No reviews yet) Write a Review
UPC:
404464559219
MPN:
59219
Condition:
New

Save More With Volume Discounts…

Buy 5 - 9 $34.40 each
Buy 10 or above $33.34 each
  • ESU 59219 LokPilot 5 Fx Standard Multi-protocol (DCC/MM/SX/M4) Function-Only Decoder - NEM660 21MTC Integral Connector
  • ESU 59219 LokPilot 5 Fx Standard Multi-protocol (DCC/MM/SX/M4) Function-Only Decoder - NEM660 21MTC Integral Connector
MSRP: CAD $41.29
Price: CAD $35.10
— You save CAD $6.19

Description

ESU 59219 LokPilot 5 Fx Standard Multi-protocol (DCC/MM/SX/M4) Function-Only Decoder - NEM660 21MTC Integral Connector
 

LokPilot Fx dcc decoders provide function control for lighting effects, and in some cases they even provide sound output, just like their full featured siblings loksound and lokpilot but lokfunction decoders do not posess any capability to control a dc motor.

They are perfect for use in "dummy", non-powered locomotives and rolling stock like passenger cars and cabeese where it is desirable to have lots of lights to turn on and off, to have diesel engine or generator sounds, but where there is no need to provide power or speed control to operate a dc motor.


 
The LokPilot 5 Fx micro and its "twin" LokPilot 5 Fx micro DCC are versatile decoders with a Next18 interface on a footprint of 13.0mm x 9.2mm. They are used in all vehicles of nominal sizes N to H0, which do not have an engine output, but should still be able to switch light effects.

Modes

The LokPilot 5 Fx micro is a multi-protocol decoder. It masters the DCC data format as well as Motorola® and Selectrix®. In DCC format, 14 to 128 driving steps are as self-evident as 2- and 4-digit addresses and up to 32 functions. With the help of RailComPlus® technology, the de-coders register fully automatically at a suitable digital center.It masters all DCC programming modes and can be both driven and programmed with compatible digital centers: Thanks to RailCom®, it is possible to read out the CV values on the main track with suitable control panels. Auxiliary registers exist for control panels that can only program the CVs from 1-255.Motorola® users benefit from up to 28 driving steps at 255 addresses. Three additional Motorola® addresses enable the triggering of 16 functions. A built-in programming mode also makes reprogramming possible with the venerable Control Unit 6021.The LokPilot 5 Fx micro DCC speaks "only" the DCC protocol, but can also be automatically registered with RailComPlus® at appropriate control centers.The LokPilot 5 Fx micro decoder detects the Märklin® brake distances as well as ZIMO® HLU / ZACK commands or the Lenz® ABC system. Braking with DCC brake blocks or with equal voltage is also possible. In addition, it also stops with a Selectrix® brake diode. An automatic ABC pen train allows automatic commuting between two stations. Although this decoder does not have an engine output, this is also important for a function decoder in order to be able to synchronize control cars and motor cars.The LokPilot 5 Fx micro decoder can be used on analog DC and ac current webs; the LokPilot 5 Fx micro DCC on analog DC webs.The decoder switches "on-the-fly" fully automatically between operating modes. Most of the time, nothing needs to be adjusted.

Functions

The LokPilot 5 Fx micro or LokPilot 5 Fx micro DCC has been equipped with an astonishing number of function outputs. Thus, 6 reinforced function outputs with 180mA output current each as well as two logic level outputs for servos or Susi are available. The brightness of each output can be set separately.

Interaction

LokPilot 5 Fx micro are designed for interaction with the LokSound 5 and the LokPilot 5 decoders: for example, it is possible to equip the locomotive of a multiple unit with a LokSound 5 micro decoder and the control car with a LokPilot 5 Fx micro. Provided the same address, both are absolutely identical. The identical arrangement of the CVs facilitates the tuning of the two decoders.

Operational reliability

On request, a PowerPack can be connected to the LokPilot 5 Fx micro and LokPilot 5 Fx micro DCC to bridge dirty rail cuts.

Protection

Of course, the outputs are protected against overload. We want you to enjoy your decoder for as long as possible.

Decoder Specifications:

  • Size: 21.4 mm x 15.5 mm x 4.5 mm  (0.84 in x 0.61 in x 0.18 in)
  • Interface: NEM660 21MTC Integral Connector
  • Motor Rating: NA - Function-Only
  • BEMF: NA
  • Functions:
    • NEM652 8-pin Wired Plug - 10 amplified outputs for special functions
    • NEM658 PluX22 Integral Connector and NEM660 21MTC Integral Connector - 10 amplified outputs for special functions, 4 Logic-level outputs or Servo Outputs (total: Up to 14 outputs)
  • Protocol: DCC with RailComPlus®, M4, Motorola® and Selectrix®
  • Additional Features:
    • Updatable with ESU-LokProgrammer
    • Connection interface for RC servos and SUSI modules
    • Optional optional PowerPack storage capacitor connections
 Interface
  • NEM652 8-pin Wired Plug
  • NEM658 PluX22 Integral Connector
  • NEM660 21MTC Integral Connector

 

View AllClose

Additional Resources

MANUFACTURERS WEBSITE:
SOUND CONFIGURATION & SOUND FILE RESOURCES:
FIRMWARE & SOFTWARE RESOURCES:
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES:
MANUFACTURERS WARRANTY & REPAIRS:
ADDITIONAL INFORMATION - DCC TIPS:
ADDITIONAL INFORMATION (1):
ADDITIONAL INFORMATION (2):
View AllClose

Additional Information

PRODUCT CLASS :
Standard (HO-S-O*)
DECODER TYPE:
Function Only
DECODER INTERFACE (PRIMARY):
NMRA - Marklin 21MTC
DECODER INTERFACE (SECONDARY):
NA
SIZE-INCH (L x W x H):
0.65 x 0.61 x 0.18 in
SIZE-METRIC (L x W x H):
16.5 x 15.5 x 4.5 mm
MOTOR CURRENT (CONTINUOUS):
NA
MOTOR CURRENT (PEAK):
NA
FUNCTION CURRENT (MAX):
250mA each
NORMAL OUTPUT FUNCTIONS:
10
LOGIC-LEVEL FUNCTIONS:
4*
SERVO OUTPUT FUNCTIONS:
2*
FUNCTION INPUTS:
0
KEEP-ALIVE INTERFACE:
Hardwire - Solder Pad**
KA INPUT VOLTAGE (MAX):
NA
KA TOTAL CAPACITANCE:
NA
CV PROGRAMMING:
Service Mode + P.O.M.
FIRMWARE UPDATE:
Yes - LokProgrammer required
PROTOCOL:
NMRA DCC, M4, Motorola and Selectrix
BI-DIRECTIONAL COMMUNICATION:
RailCom Plus
ADDITIONAL FEATURES:
NA
NOTES (1):
* - Optional configuration - see manual
NOTES (2):
** - Optional 2 or 3 wire KA interface
View AllClose