NCE DCC
NCE DCC AR10 Auto Reverser with Circuit Breaker
(No reviews yet)
Write a Review
- UPC:
- 816757012032
- MPN:
- 52400233
- Condition:
- New
Description
NCE DCC AR10 Auto Reverser with Circuit Breaker
The AR10 is an automatic reverse loop controller for DCC layouts. In addition it functions as a circuit breaker for the reverse loop. Very simple connections: Two wires to the main line and two wires to the auto reverse loop. Recommended for DCC systems from 1 amp to 10 amps. Make sure you set the trip rating correctly to match your DCC systems current capacity.
Features of the AR10 Automatic Reverse Loop Controller
- Automatically controls polarity of DCC reverse loops
- Provides short circuit protection for loop
- Ready to run without any programming
- Trip current adjustable 1 to 10 Amps
- Easy hookup using screw terminals, no soldering
- Solid state design provides silent, reliable operation
- Status indication LED
- Additional output for remote LED
- Automatic or manual reset after short circuit shutdown
- Adjustable short circuit response time
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
All Scales |
DECODER TYPE: |
Accessory - Auto Reverser |
DECODER INTERFACE (PRIMARY): |
Screw Terminal |
DECODER INTERFACE (SECONDARY): |
NA |
SIZE-INCH (L x W x H): |
0 x 0 x 0 in |
SIZE-METRIC (L x W x H): |
0 x 0 x 0 mm |
FUNCTION CURRENT: |
10A each |
TRACK SECTION INPUT-OUTPUT: |
1 |
CIRCUIT BREAKER: |
YES |
AUTO REVERSER: |
YES |
OCCUPANCY DETECTION: |
NO |
FUNCTION CONTROL INPUTS: |
0 |
SWITCH MOTOR FUNCTION OUTPUTS: |
0 |
STATIONARY - SIGNAL LIGHTING FUNCTION OUTPUTS: |
0 |
SWITCH MOTOR TYPE - STALL MOTOR (TORTOISE SLOW-MOTION): |
NA |
SWITCH MOTOR TYPE - TWIN COIL SOLENOID (ATLAS SNAP): |
NA |
SWITCH MOTOR TYPE - BI-POLAR SOLENOID (KATO-PIKO-LGB): |
NA |
SWITCH MOTOR TYPE - SERVO MOTOR: |
NA |
PROTOCOL: |
NA |
BI-DIRECTIONAL COMMUNICATION: |
NA |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
NA |
NOTES (2): |
NA |
Related Products
Out of stock
NCE DCC EB1 v1.1 Electronic Circuit Breaker
NCE DCC
MSRP:
AUD $64.26
Price:
AUD $51.41
NCE DCC EB1 v1.1 Electronic Circuit BreakerProvides short circuit protection for one power district. Can be used with most DCC systems. Default trip time is 30
DCC Specialties PSXX-AR Power Shield Auto Reverser / Circuit Breaker / Tortoise
DCC Specialties
MSRP:
AUD $160.77
Price:
AUD $120.56
DCC Specialties PSXX-AR Power Shield Auto Reverser / Circuit Breaker / Tortoise
Our next generation of auto reversing circuit breakers are on their way! The DCC Specialties PSXX-AR and...
DCC Specialties PSXX-ARSC Power Shield Auto Reverser / Circuit Breaker / Snap
DCC Specialties
MSRP:
AUD $160.77
Price:
AUD $120.56
DCC Specialties PSXX-ARSC Power Shield Auto Reverser / Circuit Breaker / Snap
Our next generation of auto reversing circuit breakers are on their way! The DCC Specialties PSXX-AR and PSXX-ARSC...
Tam Valley Depot DCC Dual Frog Juicer/Auto-Reverser/Circuit Breaker
Tam Valley Depot
MSRP:
AUD $64.32
Price:
AUD $54.67
Tam Valley Depot DCC Dual Frog Juicer/Auto-Reverser/Circuit Breaker
For all DCC sys
Out of stock
DCC Specialties PSX-ARSC Power Shield Auto Reverser - Circuit Breaker - Snap Coil w/ Feedback
DCC Specialties
MSRP:
AUD $128.60
Price:
AUD $110.91
DCC Specialties PSX-ARSC Power Shield Auto Reverser - Circuit Breaker - Snap Coil w/ FeedbackThe PSX series is a product of Larry Maier's 10 years experience in designing and producing...
Out of stock
NCE DCC CP6 Circuit Protection - 6 Block
NCE DCC
MSRP:
AUD $65.87
Price:
AUD $52.69
NCE DCC CP6 Circuit Protection - 6 BlockBasic Circuit Protector.
You can connect up to Six Outputs with 1 amp of prote
Out of stock
NCE DCC Power Cab Auto-SW Program Track Switch
NCE DCC
MSRP:
AUD $53.00
Price:
AUD $42.40
NCE DCC Power Cab Auto-SW Program Track SwitchAuto SW: Adds a program track output to the Power Cab. Prevents accidental programming of locos on your mainline track when using Program Track mode
Tam Valley Depot DCC Circuit Breaker
Tam Valley Depot
MSRP:
AUD $64.32
Price:
AUD $54.67
Tam Valley Depot DCC Circuit Breaker
This is the same board as the Dual Frog Juice
Out of stock
NCE DCC PB110 Booster
NCE DCC
MSRP:
AUD $530.72
Price:
AUD $424.58
NCE DCC PB110 Booster10 Amp Power Booster recommended for O, G and other large scales. The PB-110A provides true 10 Amps of continuous power to your track. Enough to handle MUs of the largest...