TCS - Train Control Systems
TCS 1456 KA2 DCC Decoder Keep-Alive Device - Hardwire
- UPC:
- 879508004243
- MPN:
- 1456
- Condition:
- New
Save More With Volume Discounts…
| Buy 5 - 9 | $35.18 each |
| Buy 10 or above | $34.10 each |
Description
TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.
Newly-redesigned at half the size of a KA4, the KA2 will power HO or N scale locomotives with approximately one-third of the capacitance of KA3/KA4 devices (depending on the locomotive and motor).
This Keep-Alive® includes a Blue and a Black w/ White Stripe wire to attach it to a decoder.
Decoder Specifications:
- Dimensions: 0.35" x 0.35" x 0.61" or 8.9mm x 8.9mm x 15.5mm
- Connection: Hardwire (Other Harness Options Available)
- Input Rating: 12 to 16V
Keep Alive® Decoder Compatibility
TCS Keep Alive® (KA) devices are designed to operate with all TCS (or any other Keep Alive® ready) decoders. Decoders with a “-KA” suffix include an extra Blue wire and a Black w/ White Stripe wire for hardwiring the KA to the decoder. Decoders with a “-KAC” suffix have a 2-Pin Connector for attaching the KA(x)-C. WAUX-KA(x) and KA(x)-C devices are not compatible with non-TCS decoder plug-in Keep Alive® interfaces.
Not all DCC decoders are Keep Alive® ready. TCS decoders use software to enable and disable KeepAlive, so if your decoder does not support Keep Alive®, it may not work. Keep Alive® supported code for TCS decoders was implemented fully by November 2012. If the date code in your decoder is before this date, Keep Alive® may never enable. CV's 250, 251, and 252 read as the month, day, and year of manufacturing.
If you would like to attach a Keep Alive® unit to a non-TCS decoder, you need to connect the wires across the output of the bridge rectifier on the decoder. You will need to consult your decoder manufacturer for a schematic or wiring diagram.
Installation Notes for TCS Decoders
- ALL TCS decoders are compatible with Keep Alive® devices.
- Connect the Keep Alive® wires to the decoder (Make sure you match the wire colors on the KA to same wire color on the decoder).
- That’s it! Your locomotive is ready to run over the most treacherous of tracks.
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
Micro (N-HO-S*) |
DECODER TYPE: |
Keep-Alive Device |
SIZE-INCH (L x W x H): |
0.35 x 0.35 x 0.61 in |
SIZE-METRIC (L x W x H): |
8.9 x 8.9 x 15.5 mm |
KEEP-ALIVE INTERFACE: |
Hardwire - 2 Single Wires w/ Free Ends |
KA INPUT VOLTAGE (MAX): |
16V |
KA TOTAL CAPACITANCE: |
0.66F |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
NA |
NOTES (2): |
NA |
Related Products
TCS 1669 KA5 DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 1668 KA4 DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 2000 KA3 DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 1454 KA1 DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 1457 KA2-C DCC Decoder Keep-Alive Device - 2-pin Mini Connector
TCS - Train Control Systems
TCS 2003 KA2-P DCC Decoder Keep-Alive Device - 2-pin Micro JST Plug
TCS - Train Control Systems
TCS 2010 KA-N1 N-Scale DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 1591 Wire Harness - WAUX-KA2 - WOW101-KA Auxiliary Harness w/ KA2 DCC Decoder Keep-Alive Device
TCS - Train Control Systems
NCE Small "No-Halt" DCC Decoder Stay-Alive Device - Hardwire
NCE DCC