TCS - Train Control Systems
TCS 2000 KA3 DCC Decoder Keep-Alive Device - Hardwire
- UPC:
- 879508006506
- MPN:
- 2000
- Condition:
- New
Save More With Volume Discounts…
| Buy 5 - 9 | $24.01 each |
| Buy 10 or above | $23.27 each |
Description
TCS Keep-Alive® (KA) devices are used to supply power to decoders during times of power interruption due to dirty track or problematic track work.
The KA3 will power an HO-Scale locomotive with headlights on for approximately 6 to 20 seconds (depending on the locomotive and the efficiency of the motor).
This Keep-Alive® includes a Blue and a Black w/ White Stripe wire to attach it to a decoder.
Decoder Specifications:
- Dimensions: 1.02” x .45” x .347” or 25.9mm x 11.43mm x 8.81mm
- Connection: Hardwire (Other Harness Options Available)
- Input Voltage: 12-16V
Keep Alive® Decoder Compatibility
TCS Keep Alive® (KA) devices are designed to operate with all TCS (or any other Keep Alive® ready) decoders. Decoders with a “-KA” suffix include an extra Blue wire and a Black w/ White Stripe wire for hardwiring the KA to the decoder. Decoders with a “-KAC” suffix have a 2-Pin Connector for attaching the KA(x)-C. WAUX-KA(x) and KA(x)-C devices are not compatible with non-TCS decoder plug-in Keep Alive® interfaces.
Not all DCC decoders are Keep Alive® ready. TCS decoders use software to enable and disable KeepAlive, so if your decoder does not support Keep Alive®, it may not work. Keep Alive® supported code for TCS decoders was implemented fully by November 2012. If the date code in your decoder is before this date, Keep Alive® may never enable. CV's 250, 251, and 252 read as the month, day, and year of manufacturing.
If you would like to attach a Keep Alive® unit to a non-TCS decoder, you need to connect the wires across the output of the bridge rectifier on the decoder. You will need to consult your decoder manufacturer for a schematic or wiring diagram.
Installation Notes for TCS Decoders
- ALL TCS decoders are compatible with Keep Alive® devices.
- Connect the Keep Alive® wires to the decoder (Make sure you match the wire colors on the KA to same wire color on the decoder).
- That’s it! Your locomotive is ready to run over the most treacherous of tracks.
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
Standard (HO-S-O*) |
DECODER TYPE: |
Keep-Alive Device |
SIZE-INCH (L x W x H): |
1.02 x 0.45 x 0.35 in |
SIZE-METRIC (L x W x H): |
25.9 x 11.5 x 8.8 mm |
KEEP-ALIVE INTERFACE: |
Hardwire - 2 Single Wires w/ Free Ends |
KA INPUT VOLTAGE (MAX): |
16V |
KA TOTAL CAPACITANCE: |
1.28F |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
NA |
NOTES (2): |
NA |
Related Products
TCS 1669 KA5 DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 1668 KA4 DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 1456 KA2 DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 1454 KA1 DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 2004 KA3-P DCC Decoder Keep-Alive Device - 2-pin Micro JST Plug
TCS - Train Control Systems
TCS 2001 KA3-C DCC Decoder Keep-Alive Device - 2-pin Mini Connector
TCS - Train Control Systems
TCS 2010 KA-N1 N-Scale DCC Decoder Keep-Alive Device - Hardwire
TCS - Train Control Systems
TCS 1594 Wire Harness - WAUX-KA3 - WOW101-KA Auxiliary Harness w/ KA3 DCC Decoder Keep-Alive Device
TCS - Train Control Systems
NCE Small "No-Halt" DCC Decoder Stay-Alive Device - Hardwire
NCE DCC