TCS - Train Control Systems
TCS 2019 BSM-2 Dual Switch Machine Accessory Decoder
(No reviews yet)
Write a Review
- UPC:
- 879508007923
- MPN:
- 2019
- Condition:
- New
- Availability:
- Backorders Accepted
Save More With Volume Discounts…
| Buy 5 - 9 | $16.20 each |
| Buy 10 or above | $15.70 each |
Description
TCS 2019 BSM-2 Dual Switch Machine Accessory Decoder
The BSM-2 Switch Controller from TCS is a single-output switch controller designed for two turnouts simultaneously, such as single-crossovers. This decoder can be found in current-generation DCC E-Z Track® from Bachmann Trains Inc. The decoder can be installed as a drop-in replacement for DC E-Z Track single crossovers, as well as previous-generation E-Z Track DCC single crossovers. Soldering is required for installing this decoder. See the Installation section below for instructions.
The BSM-2 Switch Controller from TCS is a single-output switch controller designed for two turnouts simultaneously, such as single-crossovers. This decoder can be found in current-generation DCC E-Z Track® from Bachmann Trains Inc. The decoder can be installed as a drop-in replacement for DC E-Z Track single crossovers, as well as previous-generation E-Z Track DCC single crossovers. Soldering is required for installing this decoder. See the Installation section below for instructions.
- Installation in a "Snap!" - This decoder is purpose-built to operate solenoid-based "snap" turnouts, and is not designed to control “slow-motion” turnout throws. This decoder can be used to operate "snap" switches made by Bachmann, Atlas, and more!
- Power Source Options - This decoder can be operated on DCC or DC power. If powered using DC, an auxiliary power supply of at least 12V is required.
- Low Idle Current - decoder will draw 50mA or less when idle.
- Operational Mode Options - Chose from two different operational modes to suit your operations. See the Programming section below for information on how to re-configure the decoder’s Mode of Operation.
- Programming Options - The BSM-2 can be operated using DCC commands, or via the tactile push button. Configuration of things such as the address, default “thrown” direction can be set up by using the push button.
Specs
- Interface Type: Hard-Wire (drop-in ready for Bachmann E-Z Track single turnout and wye)
- Dimensions (L x W x H): 1.890" x 1.100" x 0.233" or 48.0mm x 28.0mm x 5.9mm
- Scale: HO Scale
- Continuous/Peak Current: 0.05/3.0 Amp
- Output Rating: 1.5A (pulsed)
- Number of Outputs: 2 (mirrored)
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
All Scales |
DECODER TYPE: |
Accessory - Switch |
DECODER INTERFACE (PRIMARY): |
Hardwire - Solder Pad |
DECODER INTERFACE (SECONDARY): |
NA |
SIZE-INCH (L x W x H): |
0 x 0 x 0 in |
SIZE-METRIC (L x W x H): |
0 x 0 x 0 mm |
FUNCTION CURRENT: |
1.5A pulsed |
TRACK SECTION INPUT-OUTPUT: |
0 |
CIRCUIT BREAKER: |
NA |
AUTO REVERSER: |
NA |
OCCUPANCY DETECTION: |
NA |
FUNCTION CONTROL INPUTS: |
1 |
SWITCH MOTOR FUNCTION OUTPUTS: |
2** |
STATIONARY - SIGNAL LIGHTING FUNCTION OUTPUTS: |
0 |
SWITCH MOTOR TYPE - STALL MOTOR (TORTOISE SLOW-MOTION): |
NO |
SWITCH MOTOR TYPE - TWIN COIL SOLENOID (ATLAS SNAP): |
YES |
SWITCH MOTOR TYPE - BI-POLAR SOLENOID (KATO-PIKO-LGB): |
NO |
SWITCH MOTOR TYPE - SERVO MOTOR: |
NO |
PROTOCOL: |
NA |
BI-DIRECTIONAL COMMUNICATION: |
RailCom |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
* Tactile push button mounted to device |
NOTES (2): |
** 2x outputs function simultaneously |
Related Products
TCS 2018 BSM-1 Dual Switch Machine Accessory Decoder
TCS - Train Control Systems
MSRP:
£19.86
Price:
£15.89
TCS 2018 BSM-1 Dual Switch Machine Accessory DecoderThe BSM-1 Accessory Decoder from TCS is a single-output switch controller designed for single turnouts, including wyes. This decoder can be found...
Digitrax DS52 Dual Stationary Decoder for Snap Switches or Slow Motion Machines
Digitrax
MSRP:
£22.29
Price:
£17.83
Digitrax DS52 Dual Stationary Decoder for Snap Switches or Slow Motion Machines
Dual Stationary Decoder for Bi-polar, Snap Switches or Slow Motion Machines
On Sale
PRE-OWNED TCS DCC Decoder K4D6
Distributed by SBS4DCC.com
MSRP:
£37.44
Price:
£23.85
Was:
£24.68
Pre-Owned TCS DCC Decoder K4D6 Opened item for testing and store use. Never installed.
TCS 1011 M4 DCC Decoder - Hardwire
TCS - Train Control Systems
MSRP:
£49.32
Price:
£39.45
TCS 1011 M4 DCC Decoder - Hardwire
The M4 is a small form factor har
TCS 1485 KAM4 DCC Decoder - Hardwire
TCS - Train Control Systems
MSRP:
£58.08
Price:
£46.46
TCS 1485 KAM4 DCC Decoder - Hardwire
This decoder is a M4 decoder with built in Keep-A
TCS 1006 M1 DCC Decoder - Hardwire
TCS - Train Control Systems
MSRP:
£41.36
Price:
£33.09
TCS 1006 M1 DCC Decoder - Hardwire
The M1 is a small form factor har
TCS 1296 Z2 DCC Decoder - Hardwire
TCS - Train Control Systems
MSRP:
£46.93
Price:
£37.54
TCS 1296 Z2 DCC Decoder - Hardwire
This full featured 2 function BEM
On Sale
TCS 1346 T4XA DCC Decoder - Hardwire
TCS - Train Control Systems
MSRP:
£31.80
Price:
£22.27
Was:
£25.44
TCS Decoders offer the following features: NMRA DCC CompliantDC or DCC Operation, 2 or 4 Digit Addressing, 14-28-128 Speed Steps, and ConsistingTCS Exclusive Auto-Adjusting&n
TCS 1295 K3D3 DCC Decoder - N Drop-in Board for Kato NW-2
TCS - Train Control Systems
MSRP:
£46.93
Price:
£37.54
TCS 1295 K3D3 DCC Decoder - N Drop-in Board for Kato NW-2
The K3D3 is a N-scale drop-in decoder designed specifically to fit the Kato N-Scale NW2 locomotive.