TCS - Train Control Systems
TCS 2150 Block-8-RCS LCC 8 Channel RailCom and Block Occupancy Detector with Power Management
(No reviews yet)
Write a Review
- UPC:
- 879508
- MPN:
- 2150
- Condition:
- New
Save More With Volume Discounts…
| Buy 5 - 9 | $81.70 each |
| Buy 10 or above | $79.20 each |
Description
TCS 2150 Block-8-RCS LCC 8 Channel RailCom and Block Occupancy Detector with Power Management
8 Channel RailCom® Detection, Block Occupancy Detection and Short Circuit Protection for all 8 channels.
8 Channel RailCom® Detection, Block Occupancy Detection and Short Circuit Protection for all 8 channels.
Features:
- Block detection
- No voltage drop during block detection
- Adjustable sensitivity (down to a single 10k axle)
- Software configurable delay
- LCC Messages for block occupancy
- RailCom®
- Detection on all 8 blocks
- Can generate RailCom cutout if your booster does not have it.
- Tells you which Locomotive is in a particular block (by DCC address) and which direction it is facing.
- Supports CV reads on the Main
Additional Resources
MANUFACTURERS WEBSITE: |
|
SOUND CONFIGURATION & SOUND FILE RESOURCES: |
|
FIRMWARE & SOFTWARE RESOURCES: |
|
PRODUCT MANUALS & TECHNICAL DOCUMENT RESOURCES: |
|
MANUFACTURERS WARRANTY & REPAIRS: |
|
ADDITIONAL INFORMATION - DCC TIPS: |
|
ADDITIONAL INFORMATION (1): |
|
ADDITIONAL INFORMATION (2): |
Additional Information
PRODUCT CLASS : |
All Scales |
DECODER TYPE: |
Accessory - Occupancy Detector |
DECODER INTERFACE (PRIMARY): |
Screw Terminal |
DECODER INTERFACE (SECONDARY): |
NA |
SIZE-INCH (L x W x H): |
0 x 0 x 0 in |
SIZE-METRIC (L x W x H): |
0 x 0 x 0 mm |
FUNCTION CURRENT: |
TBD |
TRACK SECTION INPUT-OUTPUT: |
8 |
CIRCUIT BREAKER: |
NA |
AUTO REVERSER: |
NA |
OCCUPANCY DETECTION: |
YES |
FUNCTION CONTROL INPUTS: |
0 |
SWITCH MOTOR FUNCTION OUTPUTS: |
0 |
STATIONARY - SIGNAL LIGHTING FUNCTION OUTPUTS: |
0 |
SWITCH MOTOR TYPE - STALL MOTOR (TORTOISE SLOW-MOTION): |
NO |
SWITCH MOTOR TYPE - TWIN COIL SOLENOID (ATLAS SNAP): |
NO |
SWITCH MOTOR TYPE - BI-POLAR SOLENOID (KATO-PIKO-LGB): |
NO |
SWITCH MOTOR TYPE - SERVO MOTOR: |
NO |
PROTOCOL: |
LCC |
BI-DIRECTIONAL COMMUNICATION: |
RailCom |
ADDITIONAL FEATURES: |
NA |
NOTES (1): |
NA |
NOTES (2): |
NA |
Related Products
Out of stock
RR-CirKits BOD-8-SM Block Occupancy Detector
RR-CirKits
MSRP:
£35.42
Price:
£30.10
RR-CirKits BOD-8-SM Block Occupancy Detector
This new board is compatible with LCC node sample mode which allows using output drivers on the same I/O port. This board operates as a DCC occupancy...
Out of stock
RR-CirKits BOD4 Block Occupancy Detector
RR-CirKits
MSRP:
£17.34
Price:
£15.61
RR-CirKits BOD4 Block Occupancy Detector
This board operates as a DCC occupancy detector for 4 blocks using remote CT coils. It outputs logic levels, and has a RR-CirKits standard ribbon connector...
Digitrax BXP88 LocoNet Occupancy Detector with Transponding and Power Management - 8 Detection Sections
Digitrax
MSRP:
£133.99
Price:
£104.51
Digitrax BXP88 LocoNet Occupancy Detector with Transponding and Power Management - 8 Detection Sections
BXP88 makes adding detection and transponding to your layout easier than ever. No...
Out of stock
RR-CirKits CT-Coil-Set-8 Coil Transformers for Block Occupancy Detector
RR-CirKits
MSRP:
£11.91
Price:
£10.96
RR-CirKits CT-Coil-Set-8 Coil Transformers for Block Occupancy Detector
Set of 8 CT (Current Transformer) coils for BOD-8. These 100:1 toroid coils sense the track current on leads passing through...
Digitrax BD4N DCC 4 Block Occupancy Detector
Digitrax
MSRP:
£27.54
Price:
£22.73
Digitrax BD4N DCC 4 Block Occupancy Detector
Low-cost, High-sensitivity DCC block-occupancy detection.