Command Stations, Boosters, Throttles, Accessories

NCE DCC Layout Wiring - Male Quick Connect - 18-22 AWG (Red) (64 pk)   Male Quick Connect, (Red), package of 64, 18-22AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (16 pk)   Power Drop Wires, Black, package of 16, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Black (32 pk)   Power Drop Wires, Black, package of 32, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (10 pk)   Power Drop Wires, Red, package of 10, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (16 pk)   Power Drop Wires, Red, package of 16, 22 AWG  

NCE DCC Layout Wiring - Power Drop Wires, 22 AWG - Red (32 pk)   Power Drop Wires, Red, package of 32, 22 AWG  

NCE DCC Layout Wiring - Track Bus Taps - 10-12 AWG (Yellow) (32 pk)   Track Bus Taps, (Yellow), package of 32, 10-12AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (20 pk)   Track Bus Taps, (Blue), package of 20, 14-16AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (32 pk)   Track Bus Taps, (Blue), package of 32, 14-16AWG  

NCE DCC Layout Wiring - Track Bus Taps - 14-16 AWG (Blue) (64 pk)   Track Bus Taps, (Blue), package of 64, 14-16AWG  

NCE DCC Layout Wiring Kit - 100ft DCC Power Bus Layout Wiring Kit, 100 Foot DCC power bus. DCC main bus wiring for typical 100 foot double track mainline. Includes: Main Bus - 100 feet each red and black 14 AWG stranded wire Feeder Wires - 32 each red...

NCE DCC Layout Wiring Kit - 25ft DCC Power BusLayout Wiring Kit, 25 Foot DCC power bus. DCC main bus wiring for typical 25 foot double track mainline. Includes: Main Bus - 25 feet each red and black 14 AWG stranded wire Feeder Wires - 10 each red and...

NCE DCC Layout Wiring Kit - 50ft DCC Power Bus Layout Wiring Kit, 50 Foot DCC power bus. DCC main bus wiring for typical 50 foot double track mainline. Includes: Main Bus - 50 feet each red and black 14 AWG stranded wire Feeder Wires - 16 each red and...

NCE DCC Mini Panel Automation ControllerUse one button to control multiple switches or macros on your NCE DCC system. You can have up to 30 pushbuttons, toggle switches, block detectors, etc. Can be connected for control of turnouts, signals, and other...

NCE DCC P1024 Power Supply 10A 24V for PB110, PH10, PH10-R The P1024 is a 24 Volt DC, 220-watt power supply with a US power cord. The power supply is suitable for use with the following NCE products; PB110 booster, PH10, PH10-R (10 amp systems). Note:...

NCE DCC P114 Power Supply 24W 13.8V for Power Cab P114 13.8v 24 watt DC Power Supply. US approved power supply suitable for Power Cab and other applications. Replacement power supply for the Power Cab kit. Using ANY other power supply for the Power Cab...

NCE DCC P314 Power Supply 13.8V 3A for DCC TwinP314 13.8v DC 3 Amp Power Supply for DCC Twin. Do not purchase this for use with the Power Cab. Don't forget to use a REAL surge protector not a power strip.  

NCE DCC P514 Power Supply 12V - 13.8V 5A for DB5 - PB5 - SB512/13.8 Volt DC, 5 Amp internationally approved power supply. This is a replacement power supply for the SB5 Smartbooster. Do not purchase this for use with the Power Cab. The Power Cab requires...

NCE DCC P515 Power Supply 5A 15V for DB5 - PB5 - SB5     P515 15 Volt AC, 5 Amp Linear Power Supply suitable for PH-Pro, PB105, Digitrax, etc. Approved for US use only. This is a primary 5 amp AC transformer with an internal 5 amp fuse...

NCE DCC P519 Power Supply 5A 19V for PH5 - PB5a The P519 is a 19 Volt DC, 4.74 amps, 90 Watt with US power cord. Power supply suitable for use with the following NCE products: PH5 (5 Amp system) and PB5a Booster. Note: For PowerPro (5 Amp system) PB105...

NCE DCC PB105 Booster   5 Amp booster compatible with most NCE DCC systems. This item is not produced in large quantities. Shipping may be delayed if out of stock. A 5 amp Power Supply is required but not included. Order the P515 part number...

NCE DCC PB110 Booster10 Amp Power Booster recommended for O, G and other large scales. The PB-110A provides true 10 Amps of continuous power to your track. Enough to handle MUs of the largest locomotives. A 10 amp Brutus Power Supply is required but...

NCE DCC PB5 Booster 5A DCC w/ P514 Power SupplyContinuous 5 Amp booster that can be added to your existing DCC system. Includes P514 12v/13.8v DC International Power Supply with US power cord Don't forget to use a REAL surge protector not a power...

NCE PH-Box Power Pro DCC Command Station CS & 5A Box   Command Station and 5 Amp Booster combined in one box. A 5 amp Power Supply is required but not included. Order the P515 part number (5240215)  

NCE PH-Pro Power Pro 5A DCC Command Station This 5 Amp starter set has everything you need to get DCC equipped trains up and running (except power transformer, see P515). It includes the user friendly Pro Cab. You can be up and running in less than 20...

NCE PH-Pro R Power Pro 5A DCC Command Station - Radio EquippedThis 5 Amp starter set has everything you need to get DCC equipped trains up and running (except power transformer, see P515). It includes the user friendly Pro Cab. You can be up and running...

NCE Power Pro 10A DCC Command Station The PH-10 has all the same features as our Power Pro 5 Amp system described previously, but with 10 Amps of power for O-Scale and Large Scale (G) layouts. Requires a 18V, 10-12 amp power supply such as the Brutus...

NCE PH10R Power Pro 10A DCC Command Station - Radio Equipped The PH10-R is a wireless equipped system. It is designed to eliminate the need for a tethered throttle. All features of the Pro Cab are usable while in radio mode. Up to 60 additional radio and...

NCE DCC Power Cab Auto-SW Program Track SwitchAuto SW: Adds a program track output to the Power Cab. Prevents accidental programming of locos on your mainline track when using Program Track mode. Automatically disconnects your main line when in...

NCE DCC Power Cab DCC Command StationAn entire DCC system in the palm of your hand. This 2 Amp system can operate up to 4 HO locomotives or 8 N scale locomotives running at the same time. Provides all of the capability and ease of use that you’ve...

NCE DCC Power Cab PCP Cab Bus Facia Connection PanelPower Cab connection panel has jacks on rear for track output and power input from the P114 power supply. The Power Cab plugs in on the front in the LEFT side with the flat cable. Facia Plate and two...

NCE DCC USB Interface PC Connection PanelComputer Interface for Power Cab. Requires the NCE Power Cab, a USB cable, and a computer with one free USB port. Plug and play with Windows 10: No driver installation needed. Remove all jumpers from board for...

NCE Pro Cab DCC Handheld ThrottleOur Deluxe Pro Cab provides the most user-friendly access to all system features. Uncomplicated menus on the easy to read, backlit LCD display guide you through the most advanced operations with a minimum of fuss. Instant...

NCE DCC Pro Cab DCC Handheld Throttle Replacement Keypad Membrane   Replacement Part Only  

NCE Pro Cab R DCC Handheld Throttle - Radio EquippedOur Radio Equipped Pro Cab R provides the most user-friendly access to all system features. Uncomplicated menus on the easy-to-read, backlit LCD guide you through the most advanced operations with...

NCE DCC Push Button Switch, SPST - N.O. Momentary - Black (8 pk)   8 pack N.O. Momentary SPST Pushbutton Black 1/4 (6.35mm) mounting hole.  

NCE DCC Push Button Switch, SPST - N.O. Momentary - Green (8 pk)   8 pack N.O. Momentary SPST Pushbutton Green 1/4 (6.35mm) mounting hole.  

NCE DCC Push Button Switch, SPST - N.O. Momentary - Red (8 pk)   8 pack N.O. Momentary SPST Pushbutton Red 1/4 (6.35mm) mounting hole.  

NCE DCC RB02 Radio Base Station - 916.50MHz Version 2.1Second-generation two-way wireless for DCC. Will handle up to 48 wireless cabs. All features of your cabs are available without plugging in! Radio-equipped cabs automatically switch from radio to...

NCE SB5 Smart Booster 5A DCC w/ P514 Power SupplyAdd an SB5 Smart Booster (command station / power booster) to your Power Cab when you need more locomotive capacity (track power). The SB5 can supply 5 Amps of track power while freeing up your Power Cab...

NCE DCC Straight-RJ12-12 Straight Throttle Cable RJ12-12, 6 Wire straight cab bus cable, 12 ft long. Not approved for use with the Power Cab. For use with the Pro Cab and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus panels. The...

NCE DCC Straight-RJ12-40 Straight Cab Bus CableRJ12-40, 6 wire straight cab bus cable, 40 feet long. Not approved for use with the Power Cab. 26awg wires For use with the Pro Cab, and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus...

NCE DCC Straight-RJ12-7 Straight Throttle Cable RJ12-7 6 Wire straight cab bus cable.   For use with the Power Cab, and other NCE Throttles. Also used to connect UTP and UTP-CAT5 cab bus panels. The standard NCE cab bus cable. 6 Wire (6P6C)...

NCE DCC Straight-RJ9-15 Straight Control Bus Booster Cable15ft control bus booster cable. The NCE standard cable used to connect the two sides of a PH-Pro system box. Can also be used to connect multiple boosters. This is a 4-wire cable with 4P4C small...

NCE DCC Straight-RJ9-25 Straight Control Bus Booster Cable25ft control bus booster cable. The NCE standard cable used to connect the two sides of a PH-Pro system box. Can also be used to connect multiple boosters. This is a 4-wire cable with 4P4C small...

NCE DCC Straight-RJ9-7 Straight Control Bus Booster Cable7ft control bus booster cable. The NCE standard cable used to connect the two sides of a PH-Pro system box. Can also be used to connect multiple boosters. This is a 4-wire cable with 4P4C small...

NCE DCC Toggle Switch, DPDT - On-Off-On (5 pk)   5 pack On/Off/On DPDT Center Off Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole  

NCE DCC Toggle Switch, DPDT - On-Off-On Momentary (3 pk)   5 pack On/Off/On DPDT Center Off Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole  

NCE DCC Toggle Switch, DPDT - On-On (5 pk)   5 pack On/On DPDT Toggle Switch 5a/125v 1/4 (6.35mm) mounting hole   

NCE DCC Toggle Switch, SPST - On-On (6 pk)   6 pack On/On SPST Toggle Switch 5a /125v 1/4 (6.35mm) mounting hole   

NCE DCC Track Power Bus Snubber / RC Filter (2 pk)    Use with any DCC system to prevent large voltage spikes.  Reduces or eliminates voltage spikes on long runs of DCC bus wire  Protects decoders from damaging inductive voltage...

NCE DCC UTP Cab Bus Facia PanelThis is our lowest cost, easiest to use, cab bus panel. All four RJ-12 jacks are wired in parallel for easy plug and play use. This board also provides a convenient point to add additional 12 Volt cab bus power for long...

NCE DCC UTP-CAT5 Cab Bus Facia Panel     Same six-wire connectors in front as standard UTP but allows use of off-the-shelf CAT5 cables to connect panel-to-panel at rear. Can be used as a cab bus splitter and also adds the ability to add power...

RR-CirKits 3TK2-1 I/O Module Mounting Track - Single Position This plastic mounting track is suitable for mounting a single I/O module to a flat surface. (3 1/2" x 2") (I/O board not included)  

RR-CirKits 3TK2-2 I/O Module Mounting Track - Dual Position This plastic mounting track is suitable for mounting two I/O modules to a flat surface. (3 1/2" x 4") (I/O board not included)  

RR-CirKits 3TK2-2W I/O Module Mounting Track - Dual Position Wide Spacing This plastic mounting track is suitable for mounting two I/O modules to a flat surface with extra wiring space between modules. (3 1/2" x 5") (I/O board not included)  

RR-CirKits 3TK2-3 I/O Module Mounting Track - Thee Position This plastic mounting track is suitable for mounting three I/O modules to a flat surface. (3 1/2" x 6") (I/O board not included)  

RR-CirKits 3TK2-3W I/O Module Mounting Track - Three Position Wide Spacing This plastic mounting track is suitable for mounting three I/O modules to a flat surface with extra wiring space between modules. (3 1/2" x 8") (I/O board not included)  

RR-CirKits 3TK2-4 I/O Module Mounting Track - Quad Position This plastic mounting track is suitable for mounting four I/O modules to a flat surface. (3 1/2" x 8") (I/O board not included)  

RR-CirKits 3TK2-4W I/O Module Mounting Track - Quad Position Wide Spacing This plastic mounting track is suitable for mounting four I/O modules to a flat surface with extra wiring space between modules. (3 1/2" x 11") (I/O board not included)  

RR-CirKits 3TK2-6 I/O Module Mounting Track - Hex Position This plastic mounting track is suitable for mounting six I/O modules to a flat surface. (3 1/2" x 12") (I/O board not included)  

RR-CirKits I/O Test-SM Sample Mode I/O Test Board This board contains 8 push button switches and 8 LED pairs. It is designed to quickly test the I/O ports on any of our boards such as the Tower LCC, Mark II, various of the WorkMan series SSB boards, and...

RR-CirKits LCC Buffer-USB NMRA CAN bus LCC® to USB interface. 2,500 Volt Digital isolation between CAN bus LCC® and USB port. Simplify your LCC configuration and/or use a PC based CTC. Compatible with JMRI OpenLCB. Type B USB connector for PC...

RR-CirKits LCC Power-Point LCC Power-Point ties together 2 LCC jacks, a Traffic Monitor, and a power supply. Create a powered LCC bus for simple wiring by powering your LCC Nodes over the cable. The LCC Power-Point supplies 1/2A to each LCC CAN Bus cable...

RR-CirKits LCC Repeater LCC Repeater features: Bit level repeater connects two LCC ® CAN bus segments. Adds two branch segments to an existing LCC ® network segment for improved node inter connection flexibility.  Note: The maximum allowed...

RR-CirKits LCC Starter Kit Introductory price for a LCC Buffer-USB, a Power-Point, 2 Terminators, includes 1' LCC cable and USB cable.

RR-CirKits LCC Terminator Pair NMRA CAN bus LCC® Termination Pair. May be used to provide the required termination at each end of the CAN bus LCC® Balanced CAN termination provides the best noise rejection. Includes CAN bus Power Indicator and...

RR-CirKits LCC VampMeter LCC Voltmeter and Ammeter features: Easily measure your CAN bus power. Size: 1-7/8" x 1-1/8" overall. Dual 4 digit continuous readout. Red and blue display. Includes a short jumper cable to simplify insertion anyplace in...

RR-CirKits LCC-LocoNet Gateway LCC (Layout Command and Control) 1024 function LCC – LocoNet translator LCC-LocoNet Gateway Message level gateway connects the LCC ® CAN bus and the Digitrax LocoNet. Dual RJ45 connectors for LCC ® CAN bus...

RR-CirKits LocoBuffer-NG (Next Generation) Digitrax LocoNet® to USB type-A* Interface unit. 1,500 Volt Digital isolation between LocoNet and USB port. Type A* USB connector for direct computer connection. RJ12 connector for LocoNet connection. 3...

RR-CirKits PS-S-15-1500 AC/DC Adapter 1500ma 15VDC Power Supply This high quality regulated switching power adapter powers any 15 Volt DC device up to 1.5 Amp. Made with quality in mind, this unit outperforms similar products. Let RR-CirKits keep your...

RR-CirKits RB-2 Dual Relay Board Relay Board - 2 is a Dual 10A DPDT relay board with logic level drivers. It is suitable for use with TC Mark II, TowerMan, Tower LCC, or other logic level output devices. It requires 12V auxiliary power to supply the...

RR-CirKits RB-4 Quad Relay Board Relay Board - 4 is a Quad 10A SPDT relay board with logic level drivers. It is suitable for use with TC Mark II, TowerMan, Tower LCC, or other logic level output devices. It requires 12V auxiliary power to supply the...

RR-CirKits SPL-22 Quick Cable Lever Connector - 2 x 2 Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 2 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different wire...

RR-CirKits SPL-22 Quick Cable Lever Connector - 2 x 2 - 25pc Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 2 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different...

RR-CirKits SPL-42 Quick Cable Lever Connector - 4 x 2 Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 4 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different wire...

RR-CirKits SPL-42 Quick Cable Lever Connector - 4 x 2 - 25pc Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 4 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different...

RR-CirKits SPL-62 Quick Cable Lever Connector - 6 x 2 Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 6 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different wire...

RR-CirKits SPL-62 Quick Cable Lever Connector - 6 x 2 - 25pc Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 6 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different...

RR-CirKits TC Mark II Tower Controller Mark II The TC-64 Tower Controller 64 line LocoNet® interface provides a simple and easy way to connect between the Digitrax LocoNet® bus and the layout. It may be connected at any convenient point on the...

RR-CirKits Tower LCC+Q General Purpose 16 Line Input/Output node for NMRA CAN bus LCC® PLUS Text based Logic Engine. Logic level interface compatible with other standard RR-CirKits I/O modules. Boot Loader for user installable firmware upgrades...

SBS4DCC Plastic Case w/ Grips for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you find the case slippery...

SBS4DCC Plastic Case w/ Grips Type 2 for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you find the case...

SBS4DCC Plastic Double Throttle Holder for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you need a safe...

SBS4DCC Plastic Single Compact Throttle Holder for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you need a...

SBS4DCC Plastic Single Throttle Holder for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you need a safe...

SBS4DCC Plastic Double Throttle Holder for ESU 50114 ECoS Mobile Control II Remote Control Handset   The ESU 50114 Mobile Control II offers an amazing interface similar to the smart phone experience.  But if you are like me, you need a safe...

SBS4DCC Throttle Lanyard   Tired of dropping your $150 throttles on the ground?  Use this simple solution to tie them and protect your investment.   Installations is easy; just follow these simple instructions.   Throttle Lanyard...

The SPROG family of DCC devices   Controlling model railroad operation increasingly uses DCC, and the SPROG DCC Programmer offers the ideal solution for programming and maintaining your fleet of DCC-equipped locomotives, in any scale from Z to G!...

The SPROG family of DCC devices   Controlling model railroad operation increasingly uses DCC, and the SPROG DCC Programmer offers the ideal solution for programming and maintaining your fleet of DCC-equipped locomotives, in any scale from Z to G!...

SPROG LCC ButtonLED LCC Network Test Module The ButtonLED is a small test board for our SPROG LCC I/O modules. It has 8 push buttons and 8 LEDs (Light Emitting Diodes) that are able to monitor and control the I/O channels. I/O channels can be configured...

SPROG LCC POWER-LCC Network Power Module The power LCC allows power to be supplied to an LCC network. It is designed to be used with an external 12V 1 Amp PSU (Power Supply Unit). We supply a suitable regulated 12V supply. Connecting the POWER-LCC to the...

SPROG LCC TERM-LCC Network Termination Module The CAN bus of an LCC or OpenLCB network must be properly terminated for correct operation. The TERM-LCC is a convenient way to provide the required termination by simply plugging one TERM-LCC into the spare...

SPROG LCC USB-LCC Network to PC Interface Module Use a USB-LCC to interface your LCC/OpenLCB network to a WIndows, Linux or MacOS computer running JMRI. Galvanically isolated to protect your layout/computer, takes power from USB and requires power from...

The SPROG family of DCC devices   Controlling model railroad operation increasingly uses DCC, and the SPROG DCC Programmer offers the ideal solution for programming and maintaining your fleet of DCC-equipped locomotives, in any scale from Z to G!...

The SPROG family of DCC devices   Controlling model railroad operation increasingly uses DCC, and the SPROG DCC Programmer offers the ideal solution for programming and maintaining your fleet of DCC-equipped locomotives, in any scale from Z to G!...

TCS 1470 CS-105 -TB3P-G - 3-Pin Terminal Block (Green)   3-Pin screw terminal block for CS-105 and B-106.   Technical: Current: 20A Number of Levels: 1 Number of Positions: 3 Number of Positions Per Level: 3 Operating Temperature: -30°C...

TCS 1483 DCC Decoder AF1 Analog Filter     The Analog Filter 1 (AF1) is used to filter the DC signal leaving the power pack. This filter pack corrects flickering in lighting effects and low-speed auto-reversing. Only one AF1 is required to...

TCS 1547 TrainSpeed 1 Model Train Speedometer     This device is designed to measure the scale speed of locomotives or train cars that past by it.    Two small light sensors mounted discretely between the ties are used to record the...

TCS 1548 TrainSpeed 4 Model Train Speedometer     This device is designed to measure the scale speed of locomotives or train cars that past by it.    Two small light sensors mounted discretely between the ties are used to record the...