RR-CirKits LCC

RR-CirKits 3TK2-1 I/O Module Mounting Track - Single Position This plastic mounting track is suitable for mounting a single I/O module to a flat surface. (3 1/2" x 2") (I/O board not included)  

RR-CirKits 3TK2-2 I/O Module Mounting Track - Dual Position This plastic mounting track is suitable for mounting two I/O modules to a flat surface. (3 1/2" x 4") (I/O board not included)  

RR-CirKits 3TK2-2W I/O Module Mounting Track - Dual Position Wide Spacing This plastic mounting track is suitable for mounting two I/O modules to a flat surface with extra wiring space between modules. (3 1/2" x 5") (I/O board not included)  

RR-CirKits 3TK2-3 I/O Module Mounting Track - Thee Position This plastic mounting track is suitable for mounting three I/O modules to a flat surface. (3 1/2" x 6") (I/O board not included)  

RR-CirKits 3TK2-3W I/O Module Mounting Track - Three Position Wide Spacing This plastic mounting track is suitable for mounting three I/O modules to a flat surface with extra wiring space between modules. (3 1/2" x 8") (I/O board not included)  

RR-CirKits 3TK2-4 I/O Module Mounting Track - Quad Position This plastic mounting track is suitable for mounting four I/O modules to a flat surface. (3 1/2" x 8") (I/O board not included)  

RR-CirKits 3TK2-4W I/O Module Mounting Track - Quad Position Wide Spacing This plastic mounting track is suitable for mounting four I/O modules to a flat surface with extra wiring space between modules. (3 1/2" x 11") (I/O board not included)  

RR-CirKits 3TK2-6 I/O Module Mounting Track - Hex Position This plastic mounting track is suitable for mounting six I/O modules to a flat surface. (3 1/2" x 12") (I/O board not included)  

RR-CirKits I/O Test-SM Sample Mode I/O Test Board This board contains 8 push button switches and 8 LED pairs. It is designed to quickly test the I/O ports on any of our boards such as the Tower LCC, Mark II, various of the WorkMan series SSB boards, and...

RR-CirKits LCC Buffer-USB NMRA CAN bus LCC® to USB interface. 2,500 Volt Digital isolation between CAN bus LCC® and USB port. Simplify your LCC configuration and/or use a PC based CTC. Compatible with JMRI OpenLCB. Type B USB connector for PC...

RR-CirKits LCC Power-Point LCC Power-Point ties together 2 LCC jacks, a Traffic Monitor, and a power supply. Create a powered LCC bus for simple wiring by powering your LCC Nodes over the cable. The LCC Power-Point supplies 1/2A to each LCC CAN Bus cable...

RR-CirKits LCC Repeater LCC Repeater features: Bit level repeater connects two LCC ® CAN bus segments. Adds two branch segments to an existing LCC ® network segment for improved node inter connection flexibility.  Note: The maximum allowed...

RR-CirKits LCC Starter Kit Introductory price for a LCC Buffer-USB, a Power-Point, 2 Terminators, includes 1' LCC cable and USB cable.

RR-CirKits LCC Terminator Pair NMRA CAN bus LCC® Termination Pair. May be used to provide the required termination at each end of the CAN bus LCC® Balanced CAN termination provides the best noise rejection. Includes CAN bus Power Indicator and...

RR-CirKits LCC VampMeter LCC Voltmeter and Ammeter features: Easily measure your CAN bus power. Size: 1-7/8" x 1-1/8" overall. Dual 4 digit continuous readout. Red and blue display. Includes a short jumper cable to simplify insertion anyplace in...

RR-CirKits LCC-LocoNet Gateway LCC (Layout Command and Control) 1024 function LCC – LocoNet translator LCC-LocoNet Gateway Message level gateway connects the LCC ® CAN bus and the Digitrax LocoNet. Dual RJ45 connectors for LCC ® CAN bus...

RR-CirKits LocoBuffer-NG (Next Generation) Digitrax LocoNet® to USB type-A* Interface unit. 1,500 Volt Digital isolation between LocoNet and USB port. Type A* USB connector for direct computer connection. RJ12 connector for LocoNet connection. 3...

RR-CirKits PS-S-15-1500 AC/DC Adapter 1500ma 15VDC Power Supply This high quality regulated switching power adapter powers any 15 Volt DC device up to 1.5 Amp. Made with quality in mind, this unit outperforms similar products. Let RR-CirKits keep your...

RR-CirKits RB-2 Dual Relay Board Relay Board - 2 is a Dual 10A DPDT relay board with logic level drivers. It is suitable for use with TC Mark II, TowerMan, Tower LCC, or other logic level output devices. It requires 12V auxiliary power to supply the...

RR-CirKits RB-4 Quad Relay Board Relay Board - 4 is a Quad 10A SPDT relay board with logic level drivers. It is suitable for use with TC Mark II, TowerMan, Tower LCC, or other logic level output devices. It requires 12V auxiliary power to supply the...

RR-CirKits SPL-22 Quick Cable Lever Connector - 2 x 2 Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 2 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different wire...

RR-CirKits SPL-22 Quick Cable Lever Connector - 2 x 2 - 25pc Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 2 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different...

RR-CirKits SPL-42 Quick Cable Lever Connector - 4 x 2 Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 4 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different wire...

RR-CirKits SPL-42 Quick Cable Lever Connector - 4 x 2 - 25pc Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 4 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different...

RR-CirKits SPL-62 Quick Cable Lever Connector - 6 x 2 Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 6 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different wire...

RR-CirKits SPL-62 Quick Cable Lever Connector - 6 x 2 - 25pc Multiple Terminal Block Push-in Wiring Cable connector Quick Cable connector, 2 in, 6 out. No more soldering under the layout. Fits AWG 28 - AWG 12 so there is no problem connecting different...

RR-CirKits TC Mark II Tower Controller Mark II The TC-64 Tower Controller 64 line LocoNet® interface provides a simple and easy way to connect between the Digitrax LocoNet® bus and the layout. It may be connected at any convenient point on the...

RR-CirKits Tower LCC+Q General Purpose 16 Line Input/Output node for NMRA CAN bus LCC® PLUS Text based Logic Engine. Logic level interface compatible with other standard RR-CirKits I/O modules. Boot Loader for user installable firmware upgrades...